52 n package side terminals l optical terminals (jack) n ferrules l multimode (2-groove type) l single mode (4-groove type) l optical terminals for cable (jack) the ferrules are designed without a gap at the push-on portion to reduce disconnections at the time of wiring.the entrance angle of the fiber has been set at 60 ? to improve the entrance of the fiber.the single mode type has 4 grooves. this offers easier adjustment of the offset direction at time of wiring.(see diagram) hrs no. cl707-0007-1 suitable fiber sm-9.5/125, gi-50/125 sm-9.5/125, gi-50/125 split sleeve specification copper alloy hrpi-bjh2 2mm product number s uitable cable cl707-0016-2 zirconia hrpi-bjh2-d 2mm hrs no. cl707-0042-2 suitable fiber sm-9.5/125, gi-50/125 sm-9.5/125, gi-50/125 split sleeve specification copper alloy HRPI-BJH1 0.9mm product number s uitable cable cl707-0029-4 zirconia HRPI-BJH1-d 0.9mm hrs no. cl704-0103-6 dimension a gi-50/125 0.124 fiber entrance angle hsc-f321-b124 product number s uitable optical fiber 60 ? hrs no. cl704-0068-7 dimension a sm-9.5/125 0.123 fiber entrance angle hsc-f321-a123 product number s uitable optical fiber 60? cl704-0104-9 hsc-f321-b125 0.125 cl704-0105-1 hsc-f321-b126 0.126 cl704-0106-4 hsc-f321-b127 0.127 cl704-0107-7 hsc-f321-b128 0.128 cl704-0069-0 hsc-f321-a124 0.124 cl704-0070-9 hsc-f321-a125 0.125 cl704-0071-1 hsc-f321-a126 0.126 cl704-0072-4 hsc-f321-a127 0.127 cl704-0073-7 hsc-f321-a128 0.128 no gap (0.1 or less) fiber entrance angle
|