[ 93 ] 201 mclean boulevard paterson, new jersey 07504 tel: (973) 881-8800 fax: (973) 881-8361 e-mail: sales@synergymwave.com world wide w eb: http://www.synergymwave.com demodulators i & q demodulators i & q 19-21 10-30 dc-10 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102s 1 qms-201 28.5-31.5 15-45 dc-15 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102s 1 qms-202 38-42 20-60 dc-20 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102s 1 qms-203 52-88 52-88 dc-35 +10 7.0 0.2/0.5 2.0/4.0 40 35 1.5:1 +3 +15 102s 1 qms-210 57-63 30-90 dc-30 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102s 1 qms-204 66.5-73.5 35-105 dc-35 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102s 1 qms-205 80-160 80-160 dc-40 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 102s 1 qms-206 100-200 100-200 dc-50 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 102s 1 qms-207 810-830 810-830 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 102s 1 qms-214 850-950 850-950 dc-100 +10 8.0 0.8/1.3 3.0/6.0 35 30 1.8:1 +3 +15 102s 1 qms-213 869-894 869-894 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 102s 1 qms-224 935-960 935-960 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 102s 1 qms-234 1805-1880 1805-1880 dc-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 102s 1 qms-244 l eadless s urface -m ount m odels #11834 all other #2 1 8 11 5 all other pin-out t able for pin location and package outline drawings, see back pages. rf lo if 1 if 2 case gnd frequency (mhz) lo rf if vswr max model lo level (dbm) nom isola tion (db) lo/rf lo/if min min amplitude unbalance (db) typ/max conversion loss (db) max input 1 db comp. pt. (dbm) min pin-out (see below) input ip 3 (dbm) typ phase unbalance (degrees) typ/max package frequency (mhz) lo rf if vswr typ model lo level (dbm) nom isola tion (db) lo/rf lo/if min min amplitude balance (db) typ/max conversion loss (db) max input 1 db comp. pt. (dbm) min pin-out (see below) input ip 3 (dbm) typ phase balance (degrees) typ/max package 935-960 935-960 dc-5 +10 8.5 0.3/0.7 2.0/4.0 35 30 1.7:1 +3 +15 240 2 vms-935d 1050 1050 40 dc-40 +10 10.0 0.4/0.6 2.0/5.0 30 25 1.8:1 +3 +15 240 2 vms-1050d 1710-1780 1710-1780 dc-10 +10 8.5 0.45/1.0 3.0/6.0 28 23 1.7:1 +3 +15 240 2 vms-1710d notes: conversion loss = rf input power (dbm) minus if1 and if2 power (dbm). conversion loss = (i + q) power (dbm) minus rf power (dbm). if 1 is +90 o ref. to if 2 when rf < lo frequency. nominal impedance = 50 ohms. maximum rf input power without damage 200 mw. m iniature s urface -m ount p ackage
[ 94 ] 201 mclean boulevard paterson, new jersey 07504 tel: (973) 881-8800 fax: (973) 881-8361 e-mail: sales@synergymwave.com world wide w eb: http://www.synergymwave.com demodulators i & q demodulators i & q 15-50 15-50 dc-10 +10 7.0 0.3/0.5 2.0/5.0 40 35 1.5:1 +3 +15 151 3 QMP-15-50 15-510 15-510 dc-250 +10 7.0 0.7/1.5 5.0/10 35 20 2.0:1 +3 +15 151 3 qmp-34-15 19-21 10-30 dc-10 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 124 2 qmp-901 28.5-31.5 15-45 dc-15 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 124 2 qmp-902 38-42 20-60 dc-20 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 124 2 qmp-903 57-63 30-90 dc-30 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 124 2 qmp-904 66.5-73.5 35-105 dc-35 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 124 2 qmp-905 80-160 80-160 dc-40 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 124 2 qmp-906 100-200 100-200 dc-50 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 124 2 qmp-907 810-830 810-830 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 124 2 qmp-914 869-894 869-894 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 124 2 qmp-924 935-960 935-960 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 124 2 qmp-934 1805-1880 1805-1880 dc-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 124 2 qmp-944 1 9-21 10-30 dc-10 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102 1 qmr-201 28.5-31.5 15-45 dc-15 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102 1 qmr-202 38-42 20-60 dc-20 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102 1 qmr-203 57-63 30-90 dc-30 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102 1 qmr-204 66.5-73.5 35-105 dc-35 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 102 1 qmr-205 80-160 80-160 dc-40 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 102 1 qmr-206 100-200 100-200 dc-50 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 102 1 qmr-207 810-830 810-830 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 102 1 qmr-214 869-894 869-894 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 102 1 qmr-224 935-960 935-960 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 102 1 qmr-234 1805-1880 1805-1880 dc-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 102 1 qmr-244 t hrough - h ole m ount 8 pin - r elay c an conversion loss = rf input power (dbm) minus if1 and if2 power (dbm). notes: if 1 is +90 o ref to if 2 when rf < lo frequency. nominal impedance = 50 ohms. maximum rf input power without damage 200 mw. 6 p in (wideband) and 16 p in frequency (mhz) lo rf if vswr max model lo level (dbm) nom isola tion (db) lo/rf lo/if min min amplitude unbalance (db) typ/max conversion loss (db) max input 1 db comp. pt. (dbm) min pin-out (see below) input ip 3 (dbm) typ phase unbalance (degrees) typ/max package frequency (mhz) lo rf if vswr max model lo level (dbm) nom isola tion (db) lo/rf lo/if min min amplitude unbalance (db) typ/max conversion loss (db) max input 1 db comp. pt. (dbm) min pin-out (see below) input ip 3 (dbm) typ phase unbalance (degrees) typ/max package #1 1 8 3 4 all other #2 1 16 4 13 all other #31 63 2 4,5 for pin location and package outline drawings, see back pages. pin-out table rf lo if 1 if 2 case gnd 124 151
[ 95 ] 201 mclean boulevard paterson, new jersey 07504 tel: (973) 881-8800 fax: (973) 881-8361 e-mail: sales@synergymwave.com world wide w eb: http://www.synergymwave.com demodulators i & q demodulators i & q 19-21 10-30 dc-10 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 115 1 qmf-201 28.5-31.5 15-45 dc-15 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 115 1 qmf-202 38-42 20-60 dc-20 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 115 1 qmf-203 57-63 30-90 dc-30 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 115 1 qmf-204 66.5-73.5 35-105 dc-35 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 115 1 qmf-205 80-160 80-160 dc-40 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 115 1 qmf-206 100-200 100-200 dc-50 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 115 1 qmf-207 810-830 810-830 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 115 1 qmf-214 869-894 869-894 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 115 1 qmf-224 935-960 935-960 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 115 1 qmf-234 1805-1880 1805-1880 dc-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 115 1 qmf-244 conversion loss = rf input power (dbm) minus if1 and if2 power (dbm). notes: if 1 is +90 o ref to if 2 when rf < lo frequency. nominal impedance = 50 ohms. maximum rf input power without damage 200 mw. *select female connector suffix: s=sma, b=bnc, n=type n, t=tnc. all other models numbers are available with sma connectors only. 15-510 15-510 dc-250 +10 7.0 0.7/1.5 5.0/10 35 20 2.0:1 +3 +15 153 2 qmk-34-15 19-21 10-30 dc-10 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 113 2 qmk-701* 28.5-31.5 15-45 dc-15 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 113 2 qmk-702* 38-42 20-60 dc-20 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 113 2 qmk-703* 57-63 30-90 dc-30 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 113 2 qmk-704* 66.5-73.5 35-105 dc-35 +10 7.0 0.2/0.4 1.0/2.0 40 35 1.5:1 +3 +15 113 2 qmk-705* 80-160 80-160 dc-40 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 113 2 qmk-706* 100-200 100-200 dc-50 +10 8.0 0.6/1.0 1.0/3.0 35 30 1.5:1 +3 +15 113 2 qmk-707* 810-830 810-830 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 113 2 qmk-714* 869-894 869-894 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 113 2 qmk-724* 935-960 935-960 dc-50 +10 8.0 0.6/1.0 1.0/4.0 35 30 1.8:1 +3 +15 113 2 qmk-734* 1805-1880 1805-1880 dc-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 113 2 qmk-744* 2450 2400-2500 dc-100 +10 7.0 0.3/0.5 2.0/5.0 17 20 2.0:1 +2 +13 153 2 qmk2450a 3410-3590 3410-3590 dc-100 +10 9.0 0.5/1.0 3.0/6.0 17 10 2.0:1 +2 +13 153 2 qmk2490a f lat p ack m odels c oaxial c onnector m odels frequency (mhz) lo rf if vswr max model lo level (dbm) nom isola tion (db) lo/rf lo/if min min amplitude unbalance (db) typ/max conversion loss (db) max input 1 db comp. pt. (dbm) min pin-out (see below) input ip 3 (dbm) typ phase unbalance (degrees) typ/max package frequency (mhz) lo rf if vswr max model lo level (dbm) nom isola tion (db) lo/rf lo/if min min amplitude unbalance (db) typ/max conversion loss (db) max input 1 db comp. pt. (dbm) min pin-out (see below) input ip 3 (dbm) typ phase unbalance (degrees) typ/max package #1 14 1 10 5 all other #2 3 1 2 4 - pin-out t able for pin location and package outline drawings, see back pages. rf lo if 1 if 2 case gnd 153 113
|
