manufacturer category series package voltage class rev . date ecliptek corp. oscillator ep35 ceramic 5.0v os89 01/04 ep35 series ? programmable crystal oscillators ? hcmos/ttl output ? +5.0v supply voltage ? tri-state and power down options ? 4 pad ceramic smd package ? rohs compliant (pb-free) oscillator ep35 electrical specifications 1.000mhz to 125.000mhz -20c to 70c or -40c to 85c -55c to 125c 5.0v dc 10% 45ma maximum (unloaded) 30ma maximum (pin 1=ground) 50a maximum (pin 1=ground) 100ppm or 50ppm maximum 2.4v dc minimum i oh =-16ma v dd -0.4v dc minimum i oh =-16ma 0.4v dc maximum i ol =+16ma 4 nseconds max (0.8v dc to 2.0v dc ) 4 nsec max (20% to 80% of waveform) 50 10(%) 50 5(%) 50pf cmos load maximum 15pf cmos load maximum 10ttl load maximum 5ttl load maximum tri-state power down enables output disable output: high impedance disable output: logic low 5ppm / year maximum 10 mseconds maximum 250psec maximum, 100psec typical 100psec maximum, 50psec typical 50psec maximum 30psec maximum inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration w/ttl load w/cmos load w/ttl load or w/cmos load w/ttl load w/cmos load at 1.4v dc w/ttl load; at 50% of waveform w/cmos load at 1.4v dc w/ttl load (<27.000mhz only), or at 50% of waveform w/cmos load (<50.000mhz only) <50.000mhz >50.000mhz <40.000mhz >40.000mhz t s pd v ih : no connection or 2.0v dc v il : (ts option) <0.8v dc v il : (pd option) <0.8v dc <33.000mhz >33.000mhz <33.000mhz >33.000mhz frequency range operating temperature range storage temperature range supply voltage (v dd ) input current disable current (ts option) standby current (pd option) frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability / output type-hcmos load drive capability / output type-ttl output control function output control function input voltage aging (at 25c) start up time period jitter: absolute period jitter: one sigma 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. h 1.3 l 5.0 w 3.2
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ep35 ceramic 5.0v os89 01/04 ep35 00 et t ts l - 24.000m tr frequency tolerance / stability 00=100ppm maximum, 45=50ppm maximum operating temp. range blank=-20c to 70c et=-40c to 85c duty cycle blank=50 10(%), t=50 5(%) output control function ts=tri-state, pd=power down part numbering guide mechanical dimensions all dimensions in millimeters tape and reel dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters *compliant to eia 481a line 1: e xx.xxx frequency in mhz (5 digits maximum + decimal) tolerances = 0.1 pin 1: tri-state or power down pin 2: case ground pin 3: output pin 4: supply voltage 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. available options blank=bulk tr=tape & reel frequency output type l=ttl, c=cmos m n o p q 1.5 min 50 min 20.2 min 13.00.2 40 min r s t u v qty/reel 2.5 min 10 min 18.4 max 180 max 12.4+2-0 1,000 reel a b c d e f 12.00.2 5.50.1 6.50.1 4.00.1 2.00.1 f g h j k l 8.00.1 b0* 1.5 +0.1- 0.0 a0* 0.30 0.05 k0* tape characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215
|