ss2p2, ss2p3 & ss2p4 vishay general semiconductor document number: 88910 revision: 22-apr-09 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 new product high current density surface mount schottky barrier rectifiers typical applications for use in low voltage high frequency inverters, freewheelling, dc -to-dc converte rs, and polarity protection applications. features ? very low profile - typical height of 1.0 mm ? ideal for automated placement ? low forward voltage drop, low power losses ? high efficiency ? low thermal resistance ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? solder dip 265 c max. 10 s, per jesd 22-a111 ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to iec 61249-2-21 definition mechanical data case: do-220aa (smp) molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free and rohs compliant, commercial grade base p/nhm3 - halogen-free and rohs compliant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 m3 suffix meets jesd 201 class 1a whisker test, hm3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes the cathode end primary characteristics i f(av) 2.0 a v rrm 20 v, 30 v, 40 v i fsm 50 a e as 11.25 mj v f 0.50 v t j max. 150 c do-220aa (smp) esmp tm series maximum ratings (t a = 25 c unless otherwise noted) parameter symbol ss2p2 ss2p3 ss2p4 unit device marking code 22 23 24 maximum repetive peak reverse voltage v rrm 20 30 40 v maximum average forward rectified current (fig. 1) i f(av) 2.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 50 a non-repetitive avalanche energy at i as = 1.5 a, l = 10 mh, t j = 25 c e as 11.25 mj voltage rate of change (rated v r ) dv/dt 10 000 v/s operating junction and storage temperature range t j, t stg - 55 to + 150 c
new product ss2p2, ss2p3 & ss2p4 vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88910 revision: 22-apr-09 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms note: (1) thermal resistance from junction to ambient and junction to lead mounted on p.c. b. with 5.0 x 5.0 mm copper pad areas. r jl is measured at the terminal of cathode band. r jc is measured at the top centre of the body note: (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit maximum instantaneous forward voltage (1) i f = 2 a i f = 2 a t j = 25 c t j = 125 c v f 0.50 0.43 0.55 0.50 v maximum reverse current at rated v r (2) t j = 25 c t j = 125 c i r - 8 150 15 a ma typical junction capacitance 4.0 v, 1 mhz c j 110 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol ss2p2 ss2p3 ss2p4 unit typical thermal resistance (1) r ja r jl r jc 115 15 20 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode ss2p4-m3/84a 0.024 84a 3000 7" diameter plastic tape and reel ss2p4-m3/85a 0.024 85a 10 000 13" diameter plastic tape and reel ss2p4hm3/84a (1) 0.024 84a 3000 7" diameter plastic tape and reel ss2p4hm3/85a (1) 0.024 85a 10 000 13" diameter plastic tape and reel figure 1. forward current derating curve 0 2.4 8 0 90 100 110 120 130 140 150 1.6 2.0 0.4 0. 8 1.2 a v erage for w ard re ctified c u rrent (a) lead temperat u re (c) t l meas u red at the cathode band terminal figure 2. maximum non-repetitive peak forward surge current 1 10 100 10 20 30 0 40 50 nu m b er of cycles at 50 hz peak for w ard s u rge c u rrent (a)
new product ss2p2, ss2p3 & ss2p4 vishay general semiconductor document number: 88910 revision: 22-apr-09 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical revers e leakage characteristics 0.1 0.3 0.5 0.7 0.9 1.1 1.3 0.1 10 1 100 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 150 c t j = 125 c t j = 25 c 20 40 60 8 0 100 0.1 1 10 100 1000 10 30 50 70 90 100 000 10 000 t j = 150 c t j = 125 c t j = 25 c percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse leakage c u rrent ( a) figure 5. typical junction capacitance figure 6. typical transient thermal impedance 0.1 10 1 100 10 100 1000 re v erse v oltage ( v ) j u nction capaci tance (pf) 0.01 10 1 100 1 10 100 0.1 1000 t - p u lse d u ration (s) transient thermal impedance (c/ w ) do-220aa (smp) cathode band 0.0 8 6 (2.1 8 ) 0.074 (1. 88 ) 0.142 (3.61) 0.126 (3.19) 0.15 8 (4.00) 0.146 (3.70) 0.013 (0.35) 0.004 (0.10) 0.012 (0.30) 0.000 (0.00) 0.01 8 (0.45) 0.006 (0.15) 0.045 (1.15) 0.033 (0. 8 5) 0.036 (0.91) 0.024 (0.61) 0.032 (0. 8 0) 0.016 (0.40) 0.103 (2.60) 0.0 8 7 (2.20) 0.053 (1.35) 0.041 (1.05) 0.012 (0.30) ref. 0.100 (2.54) 0.105 (2.67) 0.025 (0.635) 0.030 (0.762) 0.050 (1.27)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
