description: the m-densus series is a family of interchangeable memory modules. the 128 megabit sdram is a member of this family which utilizes the new and innovative space saving tsop stacking technology. the module s are constructed with 4 meg x 16 sdrams. this 64 megabit based m-densus module, the dpsd8mx16ry5 has been designed to fit in the same footprint as the 4 meg x 16 sdram tsop monolithic and 64 megabit sdram based family of m-densus modules. this allows the memory board designer to upgrade the memory in their products without redesigning the memory board, thus saving time and money. features: configuration available: 8 meg x 16 bit (with two chip selects) clock frequency: 66 [1] , 83 [1] , 100, 125 [2] , 133 [2] mhz (max.) pc100 and pc133 compatable 3.3v supply lvttl compatible i/o four bank operation programmable burst type, burst length, and cas latency 4096 cycles / 64 ms auto and self refresh package: tsop leadless stack notes: [1] available in military and industrial temperature ranges only. [2] available in commercial temperature range only. pin-out diagram functional block diagram 8mx16, 7.5 - 15ns, p12, m-densus 30a220-00 b this document contains information on a product that is currently released to production at dense-pac microsystems, inc. dense-pac reserves the right to change products or specifications herein without prior notice. pin names a0 - a11 row address: a0 - a11 column address: a0 - a7 ba0, ba1 bank select address dq0 - dq15 data in / data out cas column address strobes ras row address enables we data write enable udqm, ldqm upper & lower data input/output mask cke clock enable clk system clock cs 0- cs 1 chip selects v cc /v ss power supply/ground v ccq /v ssq data output power/ground n.c./rfu no connect reserved for future use 128 megabit synchronous dram dpsd8mx16ry5 m-densus high density memory device 30a220-00 rev. b 1
dpsd8mx16ry5 m-densus dense-pac microsystems, inc. mechanical drawing dense-pac microsystems, inc. 7321 lincoln way, garden grove, california 92841-1431 (714) 898-0007 (800) 642-4477 fax: (714) 897-1772 http://www.dense-pac.com part number description notes: [1] available in military and industrial temperature ranges only. [2] available in commercial temperature range only. [3] contact your sales representative for supplier and manufacturer codes. standard tsop pad layout is acceptable. when possible, use the dense-pac recommended footprint as shown. see application note 53a001-00 for further 30a220-00 rev. b 2
|