specification model eps-35-3.3 eps-35-12 eps-35-5 eps-35-7.5 eps-35-15 eps-35-24 eps-35-27 eps-35-48 dc voltage rated current current range rated power output voltage adj. range line regulation load regulation setup, rise time hold up time (typ.) voltage range note.5 frequency range efficiency (typ.) ac current (typ.) input inrush current (typ.) leakage current safety standards working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over load over voltage 3.3v 12v 5v 7.5v 15v 24v 27v 48v 6a 3a 6a 4.7a 2.4a 1.5a 1.3a 0.75a 0 ~ 6.6a 0 ~ 3.3a 0 ~ 6.6a 0 ~ 5.2a 0 ~ 2.65a 0 ~ 1.65a 0 ~ 1.45a 0 ~ 0.82a 19.8w 36w 30w 35.25w 36w 36w 35.1w 36w 60mvp-p 100mvp-p 70mvp-p 80mvp-p 100mvp-p 180mvp-p 180mvp-p 240mvp-p 3.1 ~ 3.6v 10.8 ~ 13.5v 4.75 ~ 5.5v 7.13 ~ 8.25v 13.5 ~ 16.5v 21.6 ~ 27v 24.3 ~ 29.7v 43.2 ~ 52.8v 2.5% 0.5% 1.5% 1000ms, 30ms/230vac 1000ms, 30ms/115vac at full load 50ms/230vac 16ms/115vac at full load 85 ~ 264vac 120 ~ 370vdc 47 ~ 63hz 3.7 ~ 4.6v 5.6 ~ 6.75v 8.63~ 10.5v 14 ~ 17v 17.25 ~ 20.25v 27.6 ~ 32.4v 31.05 ~ 36.45v 39.7 ~ 46.8v 53.3 ~ 64.8v 80% 87% 82% 84% 88% 89% 89% 90% 0.75a/115vac 0.5a/230vac cold start 40a/230vac 115 ~ 170% rated output power compliance to en55022 (cispr22) class b, en61000-3-2,-3 -30 ~ +70 (refer to "derating curve") 20 ~ 90% rh non-condensing -40 ~ +85 , 10 ~ 95% rh 0.03%/ (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 649.1khrs min. mil-hdbk-217f (25 ) 76.2*50.8*24mm (l*w*h) 35w single output switching power supply e p s - 3 5 s e r i e s withstand voltage isolation resistance i/p-o/p, i/p-fg, o/p-fg:100m ohms / 500vdc / 25 / 70% rh environment safety & emc (note 4) protection 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. 5. derating may be needed under low input voltage. please check the static ch aracteristics for more details. 6. 33% duty cycle maximum within every 30 seconds. average output power sho uld not exceed the rated power. ripple & noise (max.) note.2 voltage tolerance note.3 protection type : hiccup mode, recovers automatically after fault con dition is removed protection type : shut down o/p voltage, re-power on to recover ul60950-1, tuv en60950-1 approved compliance to , heavy industry level, criteria a en61000-4-2,3,4,5,6,8,11, en55024 <1ma/240vac i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac 0.085kg; 120pcs/11.2kg/0.97cuft 2.0% 2.0% 0.5% 0.5% 1.0% 1.0% 1.0% 0.5% 0.5% 1.0% 0.5% 0.5% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 1.0% 0.5% 0.5% eps-35-36 36v 1a 0 ~ 1.1a 36w 200mvp-p 32.4 ~ 39.6v 1.0% 0.5% 0.5% 89% features : universal ac input / full range protections: short circuit / overload / over voltage cooling by free air convection 3" 2" compact size 3 years warranty high efficiency up to 90% led indicator for power on no load power consumption<0.3w 21.78w 39.6w 33w 39w 39.75w 39.6w 39.15w 39.36w 39.6w peak load(10sec.) note.6 file name:eps-35-spec 2012-04-20 emc immunity emc emission
mechanical specification unit:mm block diagram circuit detection o.l.p. emi filter rectifier & power switching filter & rectifiers +v -v i/p fg control o.v.p. fosc : 100khz file name:eps-35-spec 2012-04-20 ac input connector (cn1) : jst b3p-vh or equivalent pin no. 12 3 assignment ac/n no pin ac/l mating housing jst vhr jst svh-21t-p1.1 or equivalent or equivalent terminal dc output connector (cn2) : jst b2p-vh or equivalent pin no. 12 assignment +v -v mating housing jst vhr or equivalent terminal jst svh-21t-p1.1 or equivalent hs1 must have safety isolation distance with system case. -30 0 20 10 30 40 20 40 80 60 50 100 60 50 70 ambient temperature ( ) input voltage (v) 60hz 85 100 95 120 115 160 140 200 180 240 220 264 load (%) 90 100 80 70 60 50 40 output derating ambient temperature ( ) load (%) (horizontal) static characteristics : grounding required 35w single output switching power supply e p s - 3 5 s e r i e s led cn1 32 1 fs1 ac fuse t2.5a/250v cn2 12 svr1 3.175 3.175 69.85 76.2 hs1 4- 3.2 24 3 max. 50.8 44.45
|
