1 nth/ntt series, type h crystal clock oscillator 3.3 & 5v, hcmos, ttl, smd ds-111 rev l | 11/02/2006 pericom semiconductor corporation ? 1-800-435-2336 ? http://www.pericom.com/saronix all speci cations are subject to change without notice. product description a crystal controlled, 3.3 or 5 volt, low current oscillator designed to drive low power, high performance microprocessors. the plastic-molded surface mountable package is ideal for today?s automated assembly environments. j-leads are compatible with eia standard footprints. the hcmos device is capable of driving both cmos and ttl loads. product features ? footprint compatible and direct replacement for sg615 series ? frequency range from 1 to 70 mhz ? 3.3v and 5v operations ? tri-state output standard ? eia standard so-j-20 foot-print ? compact, plastic-molded smd ? available on tape & reel; 24mm tape, 1000pcs reel typical applications ? low voltage cmos, hcmos and ttl compatible ? ideally suited for use with contemporary mpus and custom asics ? perfect for pcs, laptop, portable applications; disk drives ? anywhere small size, low power and surface mountability are a priority frequency range: ? 1 mhz to 70 mhz temperature range: ? operating: 0 to +70c or -40 to +85c ? storage: ?55 to +125c frequency stability tolerance: 50 or 100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, aging, shock and vibration. supply voltage: recommended operating: 5v 10% or 3.3v 10% (hcmos only) supply current: mechanical: ? shock: mil-std-883, method 2002, condition b ? solderability: mil-std-883, method 2003 ? terminal strength: mil-std-883, method 2004, condition b2 ? vibration: mil-std-883, method 2007, condition a ? solvent resistance: mil-std-202, method 215 ? resistance to soldering heat: mil-std-202, method 210, condition i or j environmental: ? thermal shock: mil-std-883, method 1011, condition a ? moisture resistance: mil-std-883, method 1004 re ow temperature: 240c max 5v, 10ttl/30pf 5v, 50pf 3.3v, 30pf 1 mhz to 26 mhz 15ma max 35ma max 15ma max 26+ mhz to 50 mhz 30ma max 45ma max 25ma max 50+ mhz to 70 mhz 45ma max 25ma max
2 nth/ntt series, type h crystal clock oscillator 3.3 & 5v, hcmos, ttl, smd pericom semiconductor corporation ? 1-800-435-2336 ? http://www.pericom.com/saronix ds-111 rev l | 11/02/2006 all speci cations are subject to change without notice. ordering information packaging information: type h 4 3 12 2.0 .079 max 9.80 .386 8.95 .352 4.7 .185 max max 13.0 .512 4.10 .161 0.51 .020 5.08 .200 0.15 .006 0.25 .010 7.62 .300 pin function: pin 1: tri-state control pin 2: gnd pin 3: output pin 4: +5 vdc saronix yyww 24.0000 mhz nth06hc recommended land pattern * * external high frequency power supply decoupling required. 1.78 .070 2.82 .111 1 2 43 5.08 .200 7.80 .307 output waveform 2.5 vdc 1.5 vdc 0.5 vdc t f t f t r t r cmos ttl symmetry symmetry gnd v dd logic 0 20% v dd 50% v dd 80% v dd logic 1 tri-state logic table pin 1 input logic 1 or nc logic 0 or gnd pin 3 output oscillation high impedance required input levels on pin 1: logic 1 = 2.0v min logic 0 = 0.8v max or 0.2v max @ 3.3v output drive hcmos: symmetry: 40/60% or 45/55% max @ 50% v dd , see part numbering guide rise and fall times: 8ns max 20% to 80% v dd @ 5v 4ns max 20% to 80% v dd @ 3.3v logic 0: 10% v dd max or 0.4v max @ 3.3v logic 1: 90% v dd min or v dd - 0.4v min @ 3.3v load: 50pf max to 50 mhz, 30pf 50+ to 70 mhz 30pf @ 3.3v operation period jitter rms: 8ps max ttl 5(v): symmetry: 40/60% or 45/55% max @ 1.5v level, see part numbering guide rise and fall times: 8ns max 0.5 to 2.5v logic 0: 0.5v max logic 1: 2.5v min load: 10 ttl to 50 mhz, 5 ttl 50+ to 70 mhz period jitter rms: 8ps max symmetry -e exam p ( t ) (t) series c h nth 0 6 24.0000 frequency
|
