View A070FW00-V7_4180221.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer approval sheet customer approval sheet customer approval sheet customer approval sheet company name company name company name company name model model model model a070fw00 v7 customer customer customer customer approved approved approved approved title : name : approval for specifications only (spec. ver. approval for specifications only (spec. ver. approval for specifications only (spec. ver. approval for specifications only (spec. ver. ) ) ) ) approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. ) ) ) ) approval for specifications and cs sample (sp approval for specifications and cs sample (sp approval for specifications and cs sample (sp approval for specifications and cs sample (spec. ve r. ec. ver. ec. ver. ec. ver. ) ) ) ) customer remark : customer remark : customer remark : customer remark : auo pm : orion peng p/n : 91.07a01.700 comment : www.datasheet.co.kr datasheet pdf - http://www..net/
all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. doc. version : 0.0 total pages : 28 date : 2009/09/11 product specification 7.0" color tft-lcd module model name a070fw00 v7 planned lifetime: from 2009/sep to 2011/dec phase-out control: from 2011/jul to 2011/dec eol schedule: 2011/jul < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2009 au optronics all rights reserved, do not copy. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 1/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. record of revision version revise date page content 0.0 2009/09/11 all first draft www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 2/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents a. general information ................................ ................................................... ........................................... 3 b. outline dimension.................................. ................................................... ............................................ 4 1. tft-lcd semi-module ............................. ................................................... ......................................... 4 c. electrical specifications.......................... ................................................... ........................................... 5 1. tft lcd panel pin assignment .................... ................................................... ..................................... 5 2. backlight pin assignment ........................ ................................................... ........................................... 6 3. absolute maximum ratings........................ ................................................... ........................................ 6 3. electrical dc characteristics ................... ................................................... ........................................... 7 4. electrical ac characteristics ................... ................................................... ........................................... 8 6. power on/off characteristics .................... ................................................... ........................................15 d. optical specification .............................. ................................................... ...........................................16 e. reliability test items ............................. ................................................... ............................................18 f. packing and marking................................ ................................................... .........................................20 1. packing form.................................... ................................................... ................................................20 2. module/panel label information .................. ................................................... ......................................21 3. carton label information........................ ................................................... ...........................................21 g. precautions........................................ ................................................... ................................................22 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 3/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. a. general information this product is for portable dvd and digital photo frame application. no. item unit specification remark 1 screen size inch 7.0(diagonal) 2 display resolution dot 480rgb(w) 234(h) 3 overall dimension mm 162.53 (w) 96.52(h) 1.43(d) note 1 4 active area mm 154.08(w) 86.58(h) 5 pixel pitch mm 0.107(w) 0.370(h) 6 color configuration -- r. g. b. stripe note 2 7 ntsc ratio % 47% 8 display mode -- normally white 9 panel surface treatment -- anti-glare, 3h 10 weight g 46 11 lcd module power consumption w 0.04 12 viewing direction 6 oclock (gray inversion) note 1: not include blacklight cable and fpc. refer next page to get further information. note 2: below figure shows dot stripe arrangement. r g b r g b r g b r g b r g b . . ( 1 2 3. .. .1398 1399 1440 ) ( 1 ..234) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 4/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension 1. tft-lcd semi-module www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 5/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. c. electrical specifications 1. tft lcd panel pin assignment pin no symbol i/o description remark 1 gnd - ground for logic circuit 2 v cc i supply voltage of logic control circuit for scan driver 3 v gl i negative power for scan driver 4 v gh i positive power for scan driver 5 stvr i/o vertical start pulse note 1 6 stvl i/o vertical start pulse note 1 7 ckv i shift clock input for scan driver 8 u/d i up/down scan control input note 1,2 9 oev i output enable input for scan driver 10 vcom i common electrode driving signal 11 vcom i common electrode driving signal 12 l/r i left/right scan control input note 1,2 13 mod i sequential sampling and simultaneous sampl ing setting 14 oeh i output enable input for data driver 15 sthl i/o start pulse for horizontal scan line note 1 16 sthr i/o start pulse for horizontal scan line note 1 17 cph3 i sampling and shifting clock pulse for dat a driver 18 cph2 i sampling and shifting clock pulse for dat a driver 19 cph1 i sampling and shifting clock pulse for dat a driver 20 v cc i supply voltage of logic control circuit for data driver 21 gnd - ground for logic circuit 22 vr i alternated video signal input(red) 23 vg i alternated video signal input(green) 24 vb i alternated video signal input(blue) 25 av dd i supply voltage for analog circuit 26 av ss - ground for analog circuit www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 6/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. i: input pin; p: power pin; g: ground pin; c: capac itor pin note 1: selection of scanning mode (please refer to the following table) setting of scan control input in/out state for start pulse scanning direction udc lrc stvd stvu sthr sthl gnd vcc out in out in from up to down, and from lef t to right. vcc gnd in out in out from down to up, and from rig ht to left. gnd gnd out in in out from up to down, and from rig ht to left. vcc vcc in out out in from down to up, and from lef t to right. note 2: definition of scanning direction. refer to figure as below: pin26 pin1 2. backlight pin assignment recommended connector : na pin no symbol i/o description remark 1 vled p led power supply 2 gndled p led ground 3. absolute maximum ratings item symbol condition min. max. unit remark v cc gnd=0 - 0.3 7 v av dd agnd=0 -0.3 7 v v gh -0.3 18 v v gl gnd=0 -15 0.3 v power voltage v gh v gl - 33 v v i -0.3 av dd +0.3 v note 3 v i -0.3 v cc +0.3 v note 4 input signal voltage vcom -2.9 7.5 v note 1: functional operation should be restricted u nder ambient temperature (25 ). note 2: maximum ratings are those values beyond whi ch damages to the device may occur. functional operation should be restricted to the limits in the electrical characteristics chapter. note 3: vr, vg, vb. note 4: sthl, sthr, oeh, lrc, cph1~cph3, stvd, stvu, oev, c kv, udc, mod www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 7/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. electrical dc characteristics a. typical operation condition (agnd =gnd = 0v) item symbol min. typ. max. unit remark v cc 3 3.3 5.5 v digital power av dd 4.5 5 5.5 v analog power v gh 14.3 15 15.7 v positive power supply for gate driver power voltage vgl -10.5 -10 -9.5 v negative power supply for gate driver v ia 0.4 - av dd -0.4 v refer to horizontal timing v iac - 4 - v ac component video signal amplitude (vr,vg,vb) v idc - av dd /2 - v dc component h level vih 0.8xvcc - vcc v input signal voltage l level vil gnd - 0.2xvc v note 1. v cac 3.5 5.6 6.5 v ac component gamma reference voltage v cdc 1.38 1.64 1.78 v dc component note 1: sthl, sthr, oeh, lrc, cph1~cph3, stvd, stvu , oev, ckv, udc, mod. note2: must follow power on/off sequence. note 3: if input signal amplitude is 3.3v, recommen d value for vcc is 3.3v if input signal amplitude is 5v, recommend value fo r vcc is 5v b. current consumption (agnd=gnd=0v) parameter symbol condition min. typ. max. unit remark input current for v gh i gh v gh =15v - 0.12 1.0 m a input current for v gl i gl v gl =-10v - 0.15 1.0 ma input current for vdd i cc dv cc = 3.3v - 2 6.0 ma input current for vgh i dd av dd =5v - 5.3 30 ma www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 8/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 4. electrical ac characteristics a. signal ac characteristics parameter symbol min. typ. max. unit. remark clock cycle time t cph 100 103 107 ns cph1 cph pulse duty t cwh 40 50 60 % cph1 cph pulse delay t c12 30 t cph /3 t cph /2 ns cph1 sth setup time t suh 20 - - ns sthr,sthl sth hold time t hdh 20 - - ns sthr,sthl sth pulse width t sth 1 t cph sthr,sthl sth period t h 61.8 63.7 66.1 s sthr,sthl oeh pulse width t oeh 1 - - t cph oeh (note 1) sample and hold disable time t dis1 1 - - t cph note 2 oev pulse width t oev 2.0 3.4 6.5 s oev ckv pulse width t ckv 1.0 3.1 4.68 s ckv clean enable time t dis2 1.0 - 1 t oev s note 3 horizontal display start t sh 1 t cph horizontal display timing range t dh 480 t cph stv setup time t suv 400 - - ns stvu, stvd stv hold time t hdv 400 - - ns stvu, stvd stv pulse width t stv - - 1 t h stvu, stvd vertical display start t sv 3 t h vertical display timing range t dv 234 t h vcom rising time t rcom - 5 s vcom falling time t fcom - 5 s vcom delay time t dcom 2 - - s tft charging time t ch 55 - - s output time delay t del 3 - - s setup time of analog vr/vg/vb t asu 60 - - ns hold time of analog vr/vg/vb t ahd 40 - - ns frame rate 50 60 - hz note 1: the maximum pulse width of oeh should refer to the minimum of tdis1 and the hsync back porch. note 2: t dis1 is time difference between oeh and sthl. note 3: t dis2 is time difference between oev and ckv www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 9/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 5 0 % 5 0 % 1 0 % 1 0 % 9 0 % 9 0 % s t h l ( r ) c p h 1 c p h 2 c p h 3 s t h t s u h t t h d h c 1 2 t t c 3 1 t c 2 3 c p h t t c w h t r f t sampling clock timing www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 10/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. fig .8 s elect c lock signal on latching r, g, b signals horizontal display timing range www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 11/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. horizontal timing www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 12/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. vertical shift clock timing www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 13/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. vertical timing (from up to down) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 14/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. the setup and hold time definition betwwen cph1 and analog signal vr www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 15/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 6. power on/off characteristics power on power off www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 16/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. d. optical specification all optical specification is measured under typical condition (note 1, 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 -- -- 12 18 24 36 ms ms note 3 contrast ratio cr at optimized viewing angle 300 400 -- note 4 top bottom left viewing angle right cr 10 R 30 50 50 50 40 65 65 65 -- -- -- -- deg. note 5 transmission y l =0 6.97 7.16 -- % note 6 x =0 -0.03 - -- 0.03 white chromaticity shift y =0 0 -- 0.06 note 7 note 1: ambient temperature =25 , and led lightbar current i l = 150 ma. to be measured in the dark room. note 2: to be measured on the center area of panel with a viewing cone of 1 by topcon luminance meter bm-5a, after 15 minutes operation. center of the screen field=1 note 3: definition of response time: the output signals of photo detector are measured when the input signals are changed from black to white(falling time) and from white t o black(rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. bm-5a www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 17/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% note 4.definition of contrast ratio: contrast ratio is calculated with the following fo rmula. status black" " at is lcd when output detector photo status white" " at is lcd when output detector photo (cr) ratio contrast = note 5. definition of viewing angle, , refer to figure as below. note 6. measured at the center area of the panel wh en all the input terminals of lcd panel are electrically opened. note 7: chromaticity shift is the difference of tho se of the light source and the panel place on it. top left bottom right www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 18/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. e. reliability test items no. test items conditions remark 1 high temperature storage ta= 70 240hrs 2 low temperature storage ta= -20 240hrs 3 high ttemperature operation tp= 60 240hrs 4 low temperature operation ta= -10 240hrs 5 high temperature & high humidity tp= 50 . 80% rh 240hrs operation 6 heat shock -10 /0.5hr~60 /0.5hr, 50 cycle non-operation 7 electrostatic discharge contact = 4 kv, class b air = 8 kv, class b note 4 8 image sticking 25 , 4hrs note 5 frequency range : 10~55hz stoke : 1.5mm sweep : 10 hz ~55 hz 2 hours for each direction of x,y,z 9 vibration 4 hours for y direction non-operation jis c7021, a-10 condition a : 15 minutes 10 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 11 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 12 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces note 1: ta: ambient temperature. tp: panel surface temperature note 2: in the standard conditions, there is not di splay function ng issue occurred. all the cosmetic specification is judged before the reliability stre ss. note 3: all the cosmetic specification is judged be fore the reliability stress. note 4 : all test techniques follow iec6100-4-2 sta ndard. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 19/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. test condition note pattern procedure and set-up contact discharge 330 , 150pf, 1sec, 8 point, 25times/point air discharge 330 , 150pf, 1sec, 8 point, 25times/point criteria b C some performance degradation allowed. no data l ost. self-recoverable hardware failure. others 1. gun to panel distance 2. no spi command, keep default register settings. note 5: operate with 5 x 5 chess board pattern as f igure and light on 4 hrs. then modify to 32 degree gray pattern. after 20 minutes, the mura is less th an jnd 2.5 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 20/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. f. packing and marking 1 . packing form 7" 8 1.07a 0 .0 0 au www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 21/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. module/panel label information the module/panel (collectively called as the produ ct) will be attached with a label of shipping numb er which represents the identification of the product at a specific location. refer to the product outli ne drawing for detailed location and size of the label. the label is composed of a 22-digit serial number and printe d with code 128 with the following definition: example: 501m06zl06123456781z05: product manufacturing week code: wk50 product version: version 1 product manufactuing factory: m06 3. carton label information the packing carton will be attached with a carton l abel where packing qty, auo model name, auo part number, customer part number (optional) and a serie s of carton number in 13 or 14 digits are printed. the carton number is apparing in the following format: refer to the drawing of packing format for the loca tion and size of the carton label. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 22/22 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. g. precautions 1. do not twist or bend the module and prevent the unsuitable external force for display module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the specified temperature . 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operatin g. do not apply the invalid signal, otherwise, it w ill cause improper shut down and damage the module. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. t he response time & brightness will drift by differe nt temperature. 7. avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause image sticking. 8. be sure to turn off the power when connecting or disconnecting the circuit. 9. polarizer scratches easily, please handle it car efully. 10. display surface never likes dirt or stains. 11. a dewdrop may lead to destruction. please wipe off any moisture before using module. 12. sudden temperature changes cause condensation, and it will cause polarizer damaged. 13. high temperature and humidity may degrade perfo rmance. please do not expose the module to the direct sunlight and so on. 14. acetic acid or chlorine compounds are not frien ds with tft display module. 15. static electricity will damage the module, plea se do not touch the module without any grounded device. 16. do not disassemble and reassemble the module by self. 17. be careful do not touch the rear side directly. 18. no strong vibration or shock. it will cause mod ule broken. 19. storage the modules in suitable environment wit h regular packing. 20. be careful of injury from a broken display modu le. 21. please avoid the pressure adding to the surface (front or rear side) of modules, because it will c ause the display non-uniformity or other function issue. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A070FW00-V7

	To Download A070FW00-V7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .