unisonic technologies co., ltd tc4069 cmos i c www.unisonic.com.tw 1 of 5 copyright ? 2011 unisonic technologies co., ltd qw-r502-635.a inverter circuits ? description the utc tc4069 consists of six inverter circuits and is manufactured using complement ary mos (cmos) to achieve wide power supply operating range, low power consumption, high noise immunity, symmetric controlled rise and fall times. all inputs are protected from damage of static discharge by diode clamps to v dd and v ss . ? features * wide supply voltage range: 3.0v ~ 18v. * high noise immunity: 0.45 v dd typ. * low power ttl compatibility: fan out of 2 driving 74l or 1 driving 74ls. dip-14 sop-14 ? ordering information ordering number lead free halogen free package packing tc4069l-d14-t tc4069g-d14-t dip-14 tube tc4069l-s14-r tc4069g-s14-r sop-14 tape reel tc4069l-s14-t TC4069G-S14-T sop-14 tube
tc4069 cmos i c unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r502-635.a ? pin configuration 1234567 14 13 12 11 10 9 v ss 8 v dd ? block diagram
tc4069 cmos i c unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r502-635.a ? absolute maximum ratings (note 2, 3) parameter symbol ratings unit dc supply voltage v dd -0.5 ~ +20 v input voltage v in -0.5 ~ v dd +0.5 v storage temperature t s -65 ~ +150 dip-14 300 power dissipation sop-14 p d 180 mw junction temperature t j 125 operating temperature t opr -40 ~ +85 storage temperature t stg -65 ~ +150 notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. ac parameters are guaranteed by dc correlated testing. 3. i oh and i ol are tested one output at a time. ? recommended operating conditions (v ss =0v ) parameter symbol ratings unit dc supply voltage v dd 3 ~ 18 v input voltage v in 0 ~ v dd v operating temperature t a -40 ~ 85 ? dc electrical characteristics (t a =25 , unless otherwise specified.)(note 2) parameter symbol conditions min typ max unit v dd =5v, v in =v dd or v ss 0.25 v dd =10v, v in =v dd or v ss 0.5 quiescent device current i dd v dd =15v, v in =v dd or v ss 1 a v dd =5v 0 0.05 v dd =10v 0 0.05 low v ol |i o |<1 a v dd =15v 0 0.05 v v dd =5v 4.95 5 v dd =10v 9.95 10 output voltage high v oh |i o |<1 a v dd =15v 14.95 15 v v dd =5v, v o =4.5v 1.0 v dd =10v, v o =9v 2.0 low v il |i o |<1 a v dd =15v,v o =13.5v 3.0 v v dd =5v, v o =0.5v 4.0 v dd =10v, v o =1v 8.0 input voltage high v ih |i o |<1 a v dd =15v, v o =1.5v 12.0 v v dd =5v, v o =0.4v 0.51 1.2 v dd =10v, v o =0.5v 1.3 3.2 low i ol v dd =15v, v o =1.5v 3.4 12 ma v dd =5v, v o =4.6v -0.51 -1 v dd =5v, v o =2.5v -2.1 -4 v dd =10v, v o =9.5v -1.3 -2.2 output current (note 3) high i oh v dd =15v, v o =13.5v -3.4 -9 ma v dd =15v, v in =0v -10 -5 -0.1 input current i in v dd =15v, v in =15v 10 -5 0.1 a
tc4069 cmos i c unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r502-635.a ? ac electrical characteristics (note 1) (t a =25 , c l =50pf, r l =200k ? , t r and t f 20 ns, unless otherwise specified) parameter symbol conditions min typ max unit v dd =5v 55 110 v dd =10v 30 60 propagation delay time from input to output t phl or t plh v dd =15v 25 50 ns v dd =5v 70 200 v dd =10v 35 100 transition time t thl or t tlh v dd =15v 30 80 ns average input capacitance c in any gate 7.5 15 pf notes: 1. ac parameters are guar anteed by dc correlated testing. 2. i oh and i ol are tested one output at a time. 3. c pd determines the no load ac power consumption of any cmos device.
tc4069 cmos i c unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r502-635.a ? ac test circuits and switching time waveforms utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
