specification model RD-35a RD-35b RD-3513 dc voltage rated current current range rated power output voltage adj. range line regulation note.4 load regulation note.5 setup, rise time hold time (typ.) voltage range frequency range efficiency (typ.) ac current (typ.) input inrush current (typ.) leakage current safety standards harmonic current ems immunity working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over load over voltage 5v 12v ch2 5v ch1 13.5v ch1 24v ch2 -13.5v ch2 4a 1a 2.2a 1.3a 1a 1.3a 0.3 ~ 4a 0.2 ~ 1a 0.3 ~ 4a 0.3 ~ 2a 0.2 ~ 1.3a 0.2 ~ 1.5a 32w 35w 35.1w 80mvp-p 120mvp-p 80mvp-p 120mvp-p 120mvp-p 120mvp-p ch1: 4.75 ~ 5.5v ch1: 4.75 ~ 5.5v ch1: 11.5 ~ 15.5v 2.0% 6.0% 2.0% 4.0% 5.0% 4.0% 0.5% 1.5% 0.5% 0.5% 1.0% 0.5% 0.5% 3.0% 0.5% 3.0% 2.0% 3.0% 500ms, 30ms/230vac 1200ms, 30ms/115vac at full load 80ms/230vac 16ms/115vac at full load 88 ~ 264vac 125 ~ 373vdc (withstand 300vac surge for 5sec. without damage) 47 ~ 63hz 79% 82% 80% ch1: 16.87 ~ 19.57v ch1: 5.75 ~ 6.75v 0.8a/115vac 0.55a/230vac cold start 36a/230vac <2ma / 240vac 110 ~ 150% rated output power protection type : hiccup mode, recovers automatically after fault con dition is removed ul60950, tuv en60950 approved compliance to en55022 (cispr22) class b compliance to en61000-3-2,-3 compliance to en61000-4-2,3,4,5,6,8,11; env50204, en61000-6 -2 (en50082-2) heavy industry level, criteria a -25 ~ +70 (refer to output load derating curve) 20 ~ 90% rh non-condensing -40 ~ +85 , 10 ~ 95% rh 0.03%/ (0 ~ 50 )on ch1 output 10 ~ 500hz, 5g 10min./1cycle, period for 60min. each along x, y, z axes 179khrs min. mil-hdbk-217f (25 ) file name:RD-35-spec 2006-04-12 protection type : hiccup mode, recovers automatically after fault co ndition is removed 99*82*36mm (l*w*h) 0.3kg; 45pcs/14kg/0.83cuft 35w dual output switching power supply r d - 3 5 s e r i e s ripple & noise (max.) note.2 voltage tolerance note.3 withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc environment safety & emc (note 6) protection emi conduction & radiation 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. line regulation is measured from low line to high line at rated load. 5. load regulation is measured from 0% to 100% rated load. 6. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still mee ts emc directives. universal ac input / full range protections:short circuit/over load/over voltage cooling by free air convection led indicator for power on 100% full load burn-in test all using 105 withstand 300vac surge input for 5 second high operating temperature up to 70 withstand 5g vibration test high efficiency, long life and high reliability 3 years warranty long life electrolytic capacitors features : ch1 output number
file name:RD-35-spec 2006-04-12 mechanical specification ambient temperature ( ) load (%) -25 -25 00 20 10 30 40 20 40 80 60 100 60 50 70 terminal pin. no assignment pin no. pin no. 12 4 3 56 assignment assignment dc output v2 dc output com dc output v1 fg ac/l ac/n 6 5 4 3 2 1 7 case no. 932a unit:mm static characteristics (a) input voltage (v) 60hz output voltage (v) output ripple (mvp-p) ta=25 4.0 60 4.2 4.6 4.4 5.2 5.0 4.8 25 50 150 100 200 250 300 80 120 100 180 200 160 140 220 264 240 10 11 12 8 97 13 +12v +5v 5 88.5 99 20.5 8.25 55 2-m3 5 18 74 6.5 40 40.5 82 17.5 28 36 87 3.5 3.5 3.5 3.5 2-m3 (horizontal) output derating 35w dual output switching power supply r d - 3 5 s e r i e s
|
