uh2b, uh2c & uh2d vishay general semiconductor document number: 89108 revision: 03-jun-09 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 new product surface mount ultrafast rectifier features ? low profile package ? ideal for automated placement ? oxide planar chip junction ? ultrafast recovery times for high frequency ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? solder dip 260 c, 40 s ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in secondary rectification and freewheeling for ultrafast switching speeds of ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. mechanical data case: do-214aa (smb) epoxy meets ul 94 v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 suffix for high reliability grade (aec-q101 qualified), meets jesd 201 class 2 whisker test polarity: color band denotes cathode end note: (1) free air, mounted on recommended copper pad area primary characteristics i f(av) 2.0 a v rrm 100 v, 150 v, 200 v i fsm 50 a t rr 25 ns v f at i f = 2.0 a 0.69 v t j max. 175 c do-214aa (smb) maximum ratings (t a = 25 c unless otherwise noted) parameter symbol uh2b uh2c uh2d unit device marking code hb hc hd maximum repetitive peak reverse voltage v rrm 100 150 200 v maximum average forward rectified current (fig. 1) (1) i f(av) 2.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 50 a operating junction and storage temperature range t j , t stg - 55 to + 175 c
new product uh2b, uh2c & uh2d vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89108 revision: 03-jun-09 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms note: (1) free air, mounted on recommended copper pad area. thermal resistance r ja - junction to ambient, r jm - junction to mount note: (1) aec-q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage (1) i f = 1.0 a i f = 2.0 a t a = 25 c v f 0.79 0.87 - 1.05 v i f = 1.0 a i f = 2.0 a t a = 125 c 0.62 0.69 - 0.90 reverse current (2) rated v r t a = 25 c t a = 125 c i r - 10 2.0 50 a maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, l rr = 0.25 a t a = 25 c t rr 15 25 ns typical reverse recovery time i f = 1.0 a, di/dt = 50 a/s, v r = 30 v, l rr = 0.1 i rm 20 35 typical softness factor (t b /t a ) i f = 2.0 a, di/dt = 200 a/s, v r = 200 v t a = 125 c s0.3 - typical reverse recovery current i rm 5.0 6.0 a typical stored charge q rr 55 - nc typical junction capacitance 4.0 v, 1 mhz c j 42 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol uh2b uh2c uh2d unit typical thermal resistance (1) r ja r jm 105 15 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode uh2d-e3/52t 0.100 52t 750 7" diameter plastic tape and reel uh2d-e3/5bt 0.100 5bt 3200 13" diameter plastic tape and reel uh2dhe3/52t (1) 0.100 52t 750 7" diameter plastic tape and reel uh2dhe3/5bt (1) 0.100 5bt 3200 13" diameter plastic tape and reel
new product uh2b, uh2c & uh2d vishay general semiconductor document number: 89108 revision: 03-jun-09 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. maximum forward current derating curve figure 2. forward power loss characteristics figure 3. typical instantaneous forward characteristics 0 2.4 95 105 115 125 135 145 155 175 a v erage for w ard rectified c u rrent (a) t m - mo u nt temperat u re (c) resisti v e or ind u cti v e load 2.0 1.6 1.2 0. 8 0.4 165 t m meas u red at mo u nt of terminal 0 0.4 0. 8 1.2 1.6 2.0 0 2.4 0.4 a v erage po w er loss ( w ) a v erage for w ard c u rrent (a) 2.0 1.6 1.2 0. 8 d = t p /t t p t d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 0.2 0.6 1.0 1.4 1. 8 t a = 150 c t a = 125 c t a = 100 c t a = 25 c 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 instantaneo u s for w ard v oltage ( v ) instan taneo u s for w ard c u rrent (a) 100 10 1 0.1 0.01 t a = 175 c figure 4. typical reverse characteristics figure 5. typical junction capacitance figure 6. typical transient thermal impedance 0.1 1 10 100 1000 t a = 150 c t a = 125 c t a = 100 c t a = 25 c percent of rated peak re v erse v oltage ( % ) 20 40 60 8 0 100 0.01 instantaneo u s re v erse c u rrent ( a) 10 30 50 70 90 t a = 175 c re v erse v oltage ( v ) j u nction capacitance (pf) 0.1 10 1 100 10 100 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p t - p u lse d u ration (s) transient thermal impedance (c/ w ) 0.001 10 1 100 100 1000 1 10 0.1 j u nction to am b ient 0.01
new product uh2b, uh2c & uh2d vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89108 revision: 03-jun-09 4 package outline dimensions in inches (millimeters) cathode band do-214aa (smb) 0.0 8 6 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.1 8 0 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.00 8 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) 0.060 (1.52) 0.030 (0.76) 0.096 (2.44) 0.0 8 4 (2.13) mountin g pad layout 0.0 8 6 (2.1 8 ) mi n . 0.060 (1.52) mi n . 0.0 8 5 (2.159) max. 0.220 ref.
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
