View UPD16724N-XXX_4753669.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. mos integrated circuit pd16724 480-output tft-lcd source driver (compatible with 256-gray scale) data sheet document no. s16086ej1v0ds00 (1st edition) date published march 2003 ns cp (k) printed in japan 2002 the mark shows major revised points. description the pd16724 is a source driver for tft-lcds capable of dealing with displays with 256-gray scale. data input is based on digital input configured as 8 bits by 6 dots (2 pixels), which can realize a full-color display of 16,777,216 colors by output of 256 values -corrected by an internal d/a converter and 9-by-2 external power modules. because the output dynamic range is as large as v ss2 + 0.2 v to v dd2 ? 0.2 v, level inversion operation of the lcd?s common electrode is rendered unnecessary. it corresponds to the 2 x 2-dot inversion drive at the time of single- sided mounting. the maximum clock frequency is 55 mhz when driving at 3.0 v. features ? cmos level input ? 480 outputs ? input of 8 bits (gray scale data) by 6 dots ? capable of outputting 256 values by means of 9-by-2 external power modules (18 units) and a d/a converter ? logic power supply voltage (v dd1 ): 2.3 to 3.6 v ? driver power supply voltage (v dd2 ): 12.0 to 15.0 v (switchable: lpc) ? output dynamic range: v ss2 + 0.2 v to v dd2 ? 0.2 v ? high-speed data transfer: f clk = 55 mhz max. (internal data transfer speed when operating at v dd1 = 3.0 v) ? apply for 2 x 2 dot-line inversion ? output voltage polarity inversion function (pol) ? input data inversion function (pol21, pol22) ? output reset control (mode1) ? slew rate control mode switching (mode2) ? slew rate control (src1, src2) ? bias current control (lpc) ordering information part number package pd16724n-xxx tcp (tab package) remark the tcp?s external shape is customized. to order the required shape, so please contact one of our sales representatives.
data sheet s16086ej1v0ds 2 pd16724 1. block diagram 80-bit bidirectional shift register c 1 c 2 c 79 c 80 data register latch d/a converter voltage follower output s 1 s 2 s 3 s 480 v 0 -v 17 pol d 00 -d 07 d 10 -d 17 d 20 -d 27 d 30 -d 37 d 40 -d 47 d 50 -d 57 sthr r,/l clk stb sthl v dd1 v ss1 pol21, pol22 mode1, mode2 level shifter v ss2 v dd2 src1, src2 lpc remark /xxx indicates active low si gnal.
data sheet s16086ej1v0ds 3 pd16724 2. pin configuration ( pd16724n-xxx) (copper foil surface, face-up) s 480 s 479 sthl s 478 d 57 d 56 : d 51 d 50 d 47 d 46 : d 41 d 40 d 37 d 36 : d 31 d 30 src2 mode2 v dd1 r , /l v 17 v 16 v 15 v 14 v 13 v 12 v 11 v 10 v 9 v dd2 v ss2 v 8 v 7 v 6 v 5 v 4 v 3 v 2 v 1 v 0 mode1 v ss1 lpc clk src1 stb pol pol22 pol21 d 27 d 26 : d 21 d 20 d 17 d 16 : d 11 d 10 d 07 d 06 : d 01 s 3 d 00 s 2 sthr s 1 surface co pp er foil remark this figure does not specify the tcp package.
data sheet s16086ej1v0ds 4 pd16724 3. pin functions (1/3) pin symbol pin name i/o description s 1 to s 480 driver output the d/a converted 256-gray-scale analog voltage is output. d 00 to d 07 port 1 display data input the display data is input with a width of 48 bits, viz., the gray scale data d 10 to d 17 (8 bits) by 6 dots (2 pixels). d 20 to d 27 d x0 : lsb, d x7 : msb d 30 to d 37 port 2 display data input d 40 to d 47 d 50 to d 57 r,/l shift direction control input the shift direction control pin of shift register. the shift directions of the shift registers are as follows. r,/l = h (right shift) : sthr (input) s 1 s 480 sthl (output) r,/l = l (left shift) : sthl (input) s 480 s 1 sthr (output) sthr right shift start pulse i/o sthl left shift start pulse i/o these are the start pulse input/output pins when connected in cascade. loading of display data starts when a high level is read at the rising edge of clk. a high level should be input as the pulse of one cycle of the clock signal. if the start pulse input is more than 2 clk, the first 1 clk of the high-level input is valid. at the rising edge of the 80th clock after the start pulse input, the start pulse output reaches the high level, thus becoming the start pulse of the next-level driver. the high-level width outputted is 1 clk. for right shift, sthr is input and sthl is output. for left shift, sthl is input and sthr is output. clk shift clock input the shift clock input pin of shift register. the display data is loaded into the data register at the rising edge. if 82 clock pulses are input after input of the start pulse, input of display data is halted automatically. the contents of the shift register are cleared at the stb?s rising edge. stb latch input the contents of the data register are transferred to the latch circuit at the rising edge. in addition, at the falling edge, the gray scale voltage is supplied to the driver. it is necessary to ensure input of one pulse per horizontal period. src1 slew rate control 1 input src1 is good at the time of mode2 = h. src1 is pulled up to the v dd1 in the ic. src1 = h: high slew rate mode (large current consumption) src1 = l: low slew rate mode (small current consumption) refer to 6. relationship between mode2, src1 and src2 for details. src2 slew rate control 2 input src2 is good at the time of mode2 = l or open. src2 is pulled down to the v ss1 in the ic. src2 = h: high slew rate period is twice the stb width from stb rising. src2 = l or open: high slew rate period is 3 times the stb width from stb rising. refer to 6. relationship between mode2, src1 and src2 for details.
data sheet s16086ej1v0ds 5 pd16724 (2/3) pin symbol pin name i/o description pol polarity input input the relation between pol and output is as follows. input of the pol signal is allowed the setup time (t pol-stb ) with respect to stb?s rising edge. mode1 = h or open: when it switches such as pol = h l or l h, all output pins are output reset during stb = h. when it does not switch, all output pins become hi-z during stb = h. refer to 7. relationship between mode, stb, src, orc, pol and output waveform for details. mode1 output reset control input mode1 is pulled up to the v dd1 in the ic. mode1 = h or open: during an stb = h period, output is reset between all- output pins. mode1 = l: during an stb = h period, output is hi-z between all-output pins. mode2 slew rate control mode switching input mode2 is pulled down to the v ss1 in the ic. mode2 = h: high slew rate period is controlled from the outside (src1 is good). mode2 = l or open: high slew rate period is formed inside the ic (src2 is good). pol21, pol22 data inversion input select of inversion or no inversion for input data. pol21: data inversion or no inversion of port1 pol22: data inversion or no inversion of port2 pol21, pol22 = h: data are inverted in the ic. pol21, pol22 = l: data are not inverted in the ic. lpc bias current control input lpc is pulled up to the v dd1 in the ic. lpc = h or open: v dd2 = 12.0 v to (13.0 v) normal static-current-consumption mode lpc = l: v dd2 = (13.0 v) to 15.0 v static-current-consumption cut mode v 0 to v 17 -corrected power supplies input input the -corrected power supplies from outside by using operational amplifier. during the gray-scale-voltage output, be sure to keep the gray scale level power supply at a constant level. make sure to maintain the following relationships. v dd2 ? 0.2 v v 0 > v 1 > v 2 > ... ... > v 7 > v 8 0.5 v dd2 + 0.5 v 0.5 v dd2 ? 0.5 v v 9 > v 10 > v 11 > ... ..., > v 16 > v 17 0.5 v ss2 + 0.2 v or v dd2 ? 0.2 v v 8 > v 7 > v 6 > ... ... > v 1 > v 0 0.5 v dd2 + 0.5 v 0.5 v dd2 ? 0.5 v v 17 > v 16 > v 15 > ... ... > v 10 > v 9 0.5 v ss2 + 0.2 v remark hi-z: high impedance pol s 12n , s 12n ? 3 , s 12n ? 4 , s 12n ? 7 , s 12n ? 8 , s 12n ? 11 note s 12n ? 1 , s 12n ? 2 , s 12n ? 5 , s 12n ? 6 , s 12n ? 9 , s 12n ? 10 note lv 0 to v 8 v 9 to v 17 hv 9 to v 17 v 0 to v 8 note n = 1,2, ..., 80
data sheet s16086ej1v0ds 6 pd16724 (3/3) pin symbol pin name i/o description v dd1 logic power supply ? 2.3 to 3.6 v v dd2 driver power supply ? 12.0 to 15.0 v v ss1 logic ground ? grounding v ss2 driver ground ? grounding cautions 1. the power start sequence must be v dd1 , logic input, v dd2 and v 0 -v 17 in that order. reverse this sequence to shut down. 2. to stabilize the supply voltage, please be sure to insert a 0.47 f bypass capacitor between v dd1 -v ss1 and v dd2 -v ss2 . furthermore, for increased precision of the d/a converter, insertion of a bypass capacitor of about 0.1 f is also advised between the -corrected power supply terminals (v 0 , v 1 , v 2 , ....., v 17 ) and v ss2 .
data sheet s16086ej1v0ds 7 pd16724 4. relationship between input data and output voltage value the pd16724 incorporates a 8-bit d/a converter which can output respectively gray scale voltages of differing polarity with respect to the lcd?s counter electrode voltage as shown in figure 4 ? 1. the d/a converter consists of ladder resistors and switches. the ladder resistors (r 0 to r 253 ) are designed so that the ratio of lcd panel ( -compensated voltages to v 0 ?-v 255 ? and v 0 ?-v 255 ? is almost equivalent. for the 2 sets of nine -compensated power supplies, v 0 -v 8 and v 9 -v 17 , respectively, input gray scale voltages of the same polarity with respect to the 0.5 v dd2 . figure 4 ? 1 shows the relationship between the driving voltages such as liquid-crystal driving voltages v dd2 , v ss2 and 0.5 v dd2 , and -corrected voltages v 0 -v 17 and the input data. be sure to maintain the voltage relationships below. v dd2 ? 0.2 v v 0 > v 1 > v 2 > v 3 > v 4 > v 5 > v 6 > v 7 > v 8 0.5 v dd2 + 0.5 v 0.5 v dd2 ? 0.5 v v 9 > v 10 > v 11 > v 12 > v 13 > v 14 > v 15 > v 16 > v 17 0.5 v ss2 + 0.2 v or v dd2 ? 0.2 v v 8 > v 7 > v 6 > v 5 > v 4 > v 3 > v 2 > v 1 > v 0 0.5 v dd2 + 0.5 v 0.5 v dd2 ? 0.5 v v 17 > v 16 > v 15 > v 14 > v 13 > v 12 > v 11 > v 10 > v 9 0.5 v ss2 + 0.2 v also, v 7 -v 8 , v 8 -v 9 and v 9 -v 10 are left open in the ic. be sure to input the gray scale level power supply at a constant level to the all pins. figures 4 ? 2 and 4 ? 3 show the relation ship between the input data and the output voltage and the resistance values of the resistor strings. figure 4 ? ? ? ? 1. relationship between input data and -corrected power supplies v dd2 v 0 v 1 v 2 v 3 v 4 v 5 v 6 v 7 0.5 v dd2 v 8 v 9 v 10 v 11 v 12 v 13 v 14 v 15 v ss2 00 01 20 40 80 c0 f0 ff input data (hex) 0.2 v 0.2 v 0.5 v 0.5 v fe v 17 v 16 15 48 64 64 32 31 15 48 64 64 32 31
data sheet s16086ej1v0ds 8 pd16724 figure 4 ? ? ? ? 2. -corrected voltages and ladder resistors ratio v 7 v 8 v 2 v 255 ? v 254 ? v 253 ? v 252 ? v 241 ? v 240 ? v 239 ? v 33 ? v 32 ? v 31 ? v 3 ? v 2 ? v 1 ? v 0 ? r 253 r 252 r 251 r 250 r 240 r 239 r 238 r 237 r 32 r 31 v 6 r 30 r 2 r 1 r 0 v 0 v 1 v 16 v 17 v 11 v 0 ?? v 1 ?? v 2 ?? v 3 ?? v 31 ?? v 32 ?? v 33 ?? v 239 ?? v 240 ?? v 241 ?? v 253 ?? v 254 ?? v 255 ?? r 0 r 1 r 2 r 29 r 30 r 31 r 32 r 237 r 238 v 15 r 239 r 240 r 251 r 252 r 253 v 9 v 10 rn ratio 1 ratio 2 value rn ratio 1 ratio 2 value rn ratio 1 ratio 2 value rn ratio 1 ratio 2 value r0 3.58 0.0084 129 r64 1.33 0.0031 48 r128 1.08 0.0025 39 r192 1.25 0.0029 45 r1 3.58 0.0084 129 r65 1.33 0.0031 48 r129 1.08 0.0025 39 r193 1.25 0.0029 45 r2 3.58 0.0084 129 r66 1.33 0.0031 48 r130 1.00 0.0023 36 r194 1.33 0.0031 48 r3 3.58 0.0084 129 r67 1.33 0.0031 48 r131 1.00 0.0023 36 r195 1.33 0.0031 48 r4 3.58 0.0084 129 r68 1.33 0.0031 48 r132 1.00 0.0023 36 r196 1.33 0.0031 48 r5 3.50 0.0082 126 r69 1.33 0.0031 48 r133 1.00 0.0023 36 r197 1.33 0.0031 48 r6 3.50 0.0082 126 r70 1.25 0.0029 45 r134 1.08 0.0025 39 r198 1.33 0.0031 48 r7 3.42 0.0080 123 r71 1.25 0.0029 45 r135 1.08 0.0025 39 r199 1.33 0.0031 48 r8 3.42 0.0080 123 r72 1.25 0.0029 45 r136 1.08 0.0025 39 r200 1.33 0.0031 48 r9 3.33 0.0078 120 r73 1.25 0.0029 45 r137 1.08 0.0025 39 r201 1.42 0.0033 51 r10 3.25 0.0076 117 r74 1.25 0.0029 45 r138 1.08 0.0025 39 r202 1.42 0.0033 51 r11 3.25 0.0076 117 r75 1.25 0.0029 45 r139 1.08 0.0025 39 r203 1.42 0.0033 51 r12 3.17 0.0074 114 r76 1.25 0.0029 45 r140 1.08 0.0025 39 r204 1.42 0.0033 51 r13 3.08 0.0072 111 r77 1.25 0.0029 45 r141 1.08 0.0025 39 r205 1.42 0.0033 51 r14 3.08 0.0072 111 r78 1.25 0.0029 45 r142 1.08 0.0025 39 r206 1.42 0.0033 51 r15 3.00 0.0070 108 r79 1.25 0.0029 45 r143 1.08 0.0025 39 r207 1.50 0.0035 54 r16 2.92 0.0068 105 r80 1.17 0.0027 42 r144 1.08 0.0025 39 r208 1.50 0.0035 54 r17 2.83 0.0066 102 r81 1.17 0.0027 42 r145 1.08 0.0025 39 r209 1.50 0.0035 54 r18 2.83 0.0066 102 r82 1.17 0.0027 42 r146 1.08 0.0025 39 r210 1.50 0.0035 54 r19 2.75 0.0064 99 r83 1.17 0.0027 42 r147 1.08 0.0025 39 r211 1.50 0.0035 54 r20 2.67 0.0062 96 r84 1.17 0.0027 42 r148 1.08 0.0025 39 r212 1.58 0.0037 57 r21 2.67 0.0062 96 r85 1.17 0.0027 42 r149 1.08 0.0025 39 r213 1.58 0.0037 57 r22 2.58 0.0060 93 r86 1.17 0.0027 42 r150 1.08 0.0025 39 r214 1.58 0.0037 57 r23 2.50 0.0058 90 r87 1.17 0.0027 42 r151 1.08 0.0025 39 r215 1.58 0.0037 57 r24 2.50 0.0058 90 r88 1.17 0.0027 42 r152 1.08 0.0025 39 r216 1.67 0.0039 60 r25 2.42 0.0056 87 r89 1.17 0.0027 42 r153 1.08 0.0025 39 r217 1.67 0.0039 60 r26 2.33 0.0054 84 r90 1.17 0.0027 42 r154 1.08 0.0025 39 r218 1.67 0.0039 60 r27 2.33 0.0054 84 r91 1.17 0.0027 42 r155 1.08 0.0025 39 r219 1.75 0.0041 63 r28 2.25 0.0053 81 r92 1.17 0.0027 42 r156 1.08 0.0025 39 r220 1.75 0.0041 63 r29 2.25 0.0053 81 r93 1.08 0.0025 39 r157 1.08 0.0025 39 r221 1.75 0.0041 63 r30 2.17 0.0051 78 r94 1.08 0.0025 39 r158 1.08 0.0025 39 r222 1.83 0.0043 66 r31 2.17 0.0051 78 r95 1.08 0.0025 39 r159 1.08 0.0025 39 r223 1.83 0.0043 66 r32 2.08 0.0049 75 r96 1.08 0.0025 39 r160 1.08 0.0025 39 r224 1.83 0.0043 66 r33 2.08 0.0049 75 r97 1.08 0.0025 39 r161 1.08 0.0025 39 r225 1.92 0.0045 69 r34 2.00 0.0047 72 r98 1.08 0.0025 39 r162 1.08 0.0025 39 r226 1.92 0.0045 69 r35 2.00 0.0047 72 r99 1.08 0.0025 39 r163 1.08 0.0025 39 r227 2.00 0.0047 72 r36 1.92 0.0045 69 r100 1.08 0.0025 39 r164 1.08 0.0025 39 r228 2.00 0.0047 72 r37 1.92 0.0045 69 r101 1.08 0.0025 39 r165 1.08 0.0025 39 r229 2.08 0.0049 75 r38 1.92 0.0045 69 r102 1.08 0.0025 39 r166 1.08 0.0025 39 r230 2.08 0.0049 75 r39 1.83 0.0043 66 r103 1.08 0.0025 39 r167 1.08 0.0025 39 r231 2.17 0.0051 78 r40 1.83 0.0043 66 r104 1.08 0.0025 39 r168 1.08 0.0025 39 r232 2.17 0.0051 78 r41 1.83 0.0043 66 r105 1.08 0.0025 39 r169 1.08 0.0025 39 r233 2.25 0.0053 81 r42 1.75 0.0041 63 r106 1.08 0.0025 39 r170 1.17 0.0027 42 r234 2.33 0.0054 84 r43 1.75 0.0041 63 r107 1.08 0.0025 39 r171 1.17 0.0027 42 r235 2.33 0.0054 84 r44 1.75 0.0041 63 r108 1.08 0.0025 39 r172 1.17 0.0027 42 r236 2.42 0.0056 87 r45 1.67 0.0039 60 r109 1.08 0.0025 39 r173 1.17 0.0027 42 r237 2.50 0.0058 90 r46 1.67 0.0039 60 r110 1.08 0.0025 39 r174 1.17 0.0027 42 r238 2.58 0.0060 93 r47 1.67 0.0039 60 r111 1.08 0.0025 39 r175 1.17 0.0027 42 r239 2.67 0.0062 96 r48 1.67 0.0039 60 r112 1.08 0.0025 39 r176 1.17 0.0027 42 r240 2.75 0.0064 99 r49 1.58 0.0037 57 r113 1.08 0.0025 39 r177 1.17 0.0027 42 r241 2.83 0.0066 102 r50 1.58 0.0037 57 r114 1.08 0.0025 39 r178 1.17 0.0027 42 r242 2.92 0.0068 105 r51 1.58 0.0037 57 r115 1.08 0.0025 39 r179 1.17 0.0027 42 r243 3.00 0.0070 108 r52 1.58 0.0037 57 r116 1.08 0.0025 39 r180 1.17 0.0027 42 r244 3.17 0.0074 114 r53 1.50 0.0035 54 r117 1.08 0.0025 39 r181 1.17 0.0027 42 r245 3.33 0.0078 120 r54 1.50 0.0035 54 r118 1.08 0.0025 39 r182 1.17 0.0027 42 r246 3.42 0.0080 123 r55 1.50 0.0035 54 r119 1.08 0.0025 39 r183 1.17 0.0027 42 r247 3.58 0.0084 129 r56 1.50 0.0035 54 r120 1.08 0.0025 39 r184 1.25 0.0029 45 r248 3.83 0.0089 138 r57 1.42 0.0033 51 r121 1.08 0.0025 39 r185 1.25 0.0029 45 r249 4.08 0.0095 147 r58 1.42 0.0033 51 r122 1.08 0.0025 39 r186 1.25 0.0029 45 r250 4.33 0.0101 156 r59 1.42 0.0033 51 r123 1.08 0.0025 39 r187 1.25 0.0029 45 r251 4.67 0.0109 168 r60 1.42 0.0033 51 r124 1.08 0.0025 39 r188 1.25 0.0029 45 r252 5.00 0.0117 180 r61 1.42 0.0033 51 r125 1.08 0.0025 39 r189 1.25 0.0029 45 r253 5.50 0.0128 198 r62 1.42 0.0033 51 r126 1.08 0.0025 39 r190 1.25 0.0029 45 total resistance 15423 r63 1.33 0.0031 48 r127 1.08 0.0025 39 r191 1.25 0.0029 45 minimum resistance value 36 remark the resistance ratio1 is a relative ratio in the case of setting the minimum resistance value to 1. the resistance ratio2 is a relative ratio in the case of setting the total resistance to 1.
data sheet s16086ej1v0ds 9 pd16724 figure 4 ? ? ? ? 3. relationship between input data and output voltage (positive side 1/2) v dd2 ? ? ? ? 0.2 v v 0 > v 1 > v 2 > v 3 > v 4 > v 5 > v 6 > v 7 > v 8 0.5 v dd2 + 0.5 v (pol21, pol22 = l) data data 00h v0' v8 40h v64' v5 01h v1' v7 41h v65' v5+(v4-v5) x 48 / 2658 02h v2' v7+(v6-v7) x 129 / 3309 42h v66' v5+(v4-v5) x 96 / 2658 03h v3' v7+(v6-v7) x 258 / 3309 43h v67' v5+(v4-v5) x 144 / 2658 04h v4' v7+(v6-v7) x 387 / 3309 44h v68' v5+(v4-v5) x 192 / 2658 05h v5' v7+(v6-v7) x 516 / 3309 45h v69' v5+(v4-v5) x 240 / 2658 06h v6' v7+(v6-v7) x 645 / 3309 46h v70' v5+(v4-v5) x 288 / 2658 07h v7' v7+(v6-v7) x 771 / 3309 47h v71' v5+(v4-v5) x 336 / 2658 08h v8' v7+(v6-v7) x 897 / 3309 48h v72' v5+(v4-v5) x 381 / 2658 09h v9' v7+(v6-v7) x 1020 / 3309 49h v73' v5+(v4-v5) x 426 / 2658 0ah v10' v7+(v6-v7) x 1143 / 3309 4ah v74' v5+(v4-v5) x 471 / 2658 0bh v11' v7+(v6-v7) x 1263 / 3309 4bh v75' v5+(v4-v5) x 516 / 2658 0ch v12' v7+(v6-v7) x 1380 / 3309 4ch v76' v5+(v4-v5) x 561 / 2658 0dh v13' v7+(v6-v7) x 1497 / 3309 4dh v77' v5+(v4-v5) x 606 / 2658 0eh v14' v7+(v6-v7) x 1611 / 3309 4eh v78' v5+(v4-v5) x 651 / 2658 0fh v15' v7+(v6-v7) x 1722 / 3309 4fh v79' v5+(v4-v5) x 696 / 2658 10h v16' v7+(v6-v7) x 1833 / 3309 50h v80' v5+(v4-v5) x 741 / 2658 11h v17' v7+(v6-v7) x 1941 / 3309 51h v81' v5+(v4-v5) x 786 / 2658 12h v18' v7+(v6-v7) x 2046 / 3309 52h v82' v5+(v4-v5) x 828 / 2658 13h v19' v7+(v6-v7) x 2148 / 3309 53h v83' v5+(v4-v5) x 870 / 2658 14h v20' v7+(v6-v7) x 2250 / 3309 54h v84' v5+(v4-v5) x 912 / 2658 15h v21' v7+(v6-v7) x 2349 / 3309 55h v85' v5+(v4-v5) x 954 / 2658 16h v22' v7+(v6-v7) x 2445 / 3309 56h v86' v5+(v4-v5) x 996 / 2658 17h v23' v7+(v6-v7) x 2541 / 3309 57h v87' v5+(v4-v5) x 1038 / 2658 18h v24' v7+(v6-v7) x 2634 / 3309 58h v88' v5+(v4-v5) x 1080 / 2658 19h v25' v7+(v6-v7) x 2724 / 3309 59h v89' v5+(v4-v5) x 1122 / 2658 1ah v26' v7+(v6-v7) x 2814 / 3309 5ah v90' v5+(v4-v5) x 1164 / 2658 1bh v27' v7+(v6-v7) x 2901 / 3309 5bh v91' v5+(v4-v5) x 1206 / 2658 1ch v28' v7+(v6-v7) x 2985 / 3309 5ch v92' v5+(v4-v5) x 1248 / 2658 1dh v29' v7+(v6-v7) x 3069 / 3309 5dh v93' v5+(v4-v5) x 1290 / 2658 1eh v30' v7+(v6-v7) x 3150 / 3309 5eh v94' v5+(v4-v5) x 1332 / 2658 1fh v31' v7+(v6-v7) x 3231 / 3309 5fh v95' v5+(v4-v5) x 1371 / 2658 20h v32' v6 60h v96' v5+(v4-v5) x 1410 / 2658 21h v33' v6+(v5-v6) x 78 / 1956 61h v97' v5+(v4-v5) x 1449 / 2658 22h v34' v6+(v5-v6) x 153 / 1956 62h v98' v5+(v4-v5) x 1488 / 2658 23h v35' v6+(v5-v6) x 228 / 1956 63h v99' v5+(v4-v5) x 1527 / 2658 24h v36' v6+(v5-v6) x 300 / 1956 64h v100' v5+(v4-v5) x 1566 / 2658 25h v37' v6+(v5-v6) x 372 / 1956 65h v101' v5+(v4-v5) x 1605 / 2658 26h v38' v6+(v5-v6) x 441 / 1956 66h v102' v5+(v4-v5) x 1644 / 2658 27h v39' v6+(v5-v6) x 510 / 1956 67h v103' v5+(v4-v5) x 1683 / 2658 28h v40' v6+(v5-v6) x 579 / 1956 68h v104' v5+(v4-v5) x 1722 / 2658 29h v41' v6+(v5-v6) x 645 / 1956 69h v105' v5+(v4-v5) x 1761 / 2658 2ah v42' v6+(v5-v6) x 711 / 1956 6ah v106' v5+(v4-v5) x 1800 / 2658 2bh v43' v6+(v5-v6) x 777 / 1956 6bh v107' v5+(v4-v5) x 1839 / 2658 2ch v44' v6+(v5-v6) x 840 / 1956 6ch v108' v5+(v4-v5) x 1878 / 2658 2dh v45' v6+(v5-v6) x 903 / 1956 6dh v109' v5+(v4-v5) x 1917 / 2658 2eh v46' v6+(v5-v6) x 966 / 1956 6eh v110' v5+(v4-v5) x 1956 / 2658 2fh v47' v6+(v5-v6) x 1026 / 1956 6fh v111' v5+(v4-v5) x 1995 / 2658 30h v48' v6+(v5-v6) x 1086 / 1956 70h v112' v5+(v4-v5) x 2034 / 2658 31h v49' v6+(v5-v6) x 1146 / 1956 71h v113' v5+(v4-v5) x 2073 / 2658 32h v50' v6+(v5-v6) x 1206 / 1956 72h v114' v5+(v4-v5) x 2112 / 2658 33h v51' v6+(v5-v6) x 1263 / 1956 73h v115' v5+(v4-v5) x 2151 / 2658 34h v52' v6+(v5-v6) x 1320 / 1956 74h v116' v5+(v4-v5) x 2190 / 2658 35h v53' v6+(v5-v6) x 1377 / 1956 75h v117' v5+(v4-v5) x 2229 / 2658 36h v54' v6+(v5-v6) x 1434 / 1956 76h v118' v5+(v4-v5) x 2268 / 2658 37h v55' v6+(v5-v6) x 1488 / 1956 77h v119' v5+(v4-v5) x 2307 / 2658 38h v56' v6+(v5-v6) x 1542 / 1956 78h v120' v5+(v4-v5) x 2346 / 2658 39h v57' v6+(v5-v6) x 1596 / 1956 79h v121' v5+(v4-v5) x 2385 / 2658 3ah v58' v6+(v5-v6) x 1650 / 1956 7ah v122' v5+(v4-v5) x 2424 / 2658 3bh v59' v6+(v5-v6) x 1701 / 1956 7bh v123' v5+(v4-v5) x 2463 / 2658 3ch v60' v6+(v5-v6) x 1752 / 1956 7ch v124' v5+(v4-v5) x 2502 / 2658 3dh v61' v6+(v5-v6) x 1803 / 1956 7dh v125' v5+(v4-v5) x 2541 / 2658 3eh v62' v6+(v5-v6) x 1854 / 1956 7eh v126' v5+(v4-v5) x 2580 / 2658 3fh v63' v6+(v5-v6) x 1905 / 1956 7fh v127' v5+(v4-v5) x 2619 / 2658 output voltage output voltage
data sheet s16086ej1v0ds 10 pd16724 figure 4 ? ? ? ? 3. relationship between input data and output voltage (positive side 2/2) v dd2 ? ? ? ? 0.2 v v 0 > v 1 > v 2 > v 3 > v 4 > v 5 > v 6 > v 7 > v 8 0.5 v dd2 + 0.5 v (pol21, pol22 = l) data data 80h v128' v4 c0h v192' v3 81h v129' v4+(v3-v4) x 39 / 2568 c1h v193' v3+(v2-v3) x 45 / 2949 82h v130' v4+(v3-v4) x 78 / 2568 c2h v194' v3+(v2-v3) x 90 / 2949 83h v131' v4+(v3-v4) x 117 / 2568 c3h v195' v3+(v2-v3) x 135 / 2949 84h v132' v4+(v3-v4) x 153 / 2568 c4h v196' v3+(v2-v3) x 183 / 2949 85h v133' v4+(v3-v4) x 189 / 2568 c5h v197' v3+(v2-v3) x 231 / 2949 86h v134' v4+(v3-v4) x 225 / 2568 c6h v198' v3+(v2-v3) x 279 / 2949 87h v135' v4+(v3-v4) x 261 / 2568 c7h v199' v3+(v2-v3) x 327 / 2949 88h v136' v4+(v3-v4) x 300 / 2568 c8h v200' v3+(v2-v3) x 375 / 2949 89h v137' v4+(v3-v4) x 339 / 2568 c9h v201' v3+(v2-v3) x 423 / 2949 8ah v138' v4+(v3-v4) x 378 / 2568 cah v202' v3+(v2-v3) x 471 / 2949 8bh v139' v4+(v3-v4) x 417 / 2568 cbh v203' v3+(v2-v3) x 522 / 2949 8ch v140' v4+(v3-v4) x 456 / 2568 cch v204' v3+(v2-v3) x 573 / 2949 8dh v141' v4+(v3-v4) x 495 / 2568 cdh v205' v3+(v2-v3) x 624 / 2949 8eh v142' v4+(v3-v4) x 534 / 2568 ceh v206' v3+(v2-v3) x 675 / 2949 8fh v143' v4+(v3-v4) x 573 / 2568 cfh v207' v3+(v2-v3) x 726 / 2949 90h v144' v4+(v3-v4) x 612 / 2568 d0h v208' v3+(v2-v3) x 777 / 2949 91h v145' v4+(v3-v4) x 651 / 2568 d1h v209' v3+(v2-v3) x 831 / 2949 92h v146' v4+(v3-v4) x 690 / 2568 d2h v210' v3+(v2-v3) x 885 / 2949 93h v147' v4+(v3-v4) x 729 / 2568 d3h v211' v3+(v2-v3) x 939 / 2949 94h v148' v4+(v3-v4) x 768 / 2568 d4h v212' v3+(v2-v3) x 993 / 2949 95h v149' v4+(v3-v4) x 807 / 2568 d5h v213' v3+(v2-v3) x 1047 / 2949 96h v150' v4+(v3-v4) x 846 / 2568 d6h v214' v3+(v2-v3) x 1104 / 2949 97h v151' v4+(v3-v4) x 885 / 2568 d7h v215' v3+(v2-v3) x 1161 / 2949 98h v152' v4+(v3-v4) x 924 / 2568 d8h v216' v3+(v2-v3) x 1218 / 2949 99h v153' v4+(v3-v4) x 963 / 2568 d9h v217' v3+(v2-v3) x 1275 / 2949 9ah v154' v4+(v3-v4) x 1002 / 2568 dah v218' v3+(v2-v3) x 1335 / 2949 9bh v155' v4+(v3-v4) x 1041 / 2568 dbh v219' v3+(v2-v3) x 1395 / 2949 9ch v156' v4+(v3-v4) x 1080 / 2568 dch v220' v3+(v2-v3) x 1455 / 2949 9dh v157' v4+(v3-v4) x 1119 / 2568 ddh v221' v3+(v2-v3) x 1518 / 2949 9eh v158' v4+(v3-v4) x 1158 / 2568 deh v222' v3+(v2-v3) x 1581 / 2949 9fh v159' v4+(v3-v4) x 1197 / 2568 dfh v223' v3+(v2-v3) x 1644 / 2949 a0h v160' v4+(v3-v4) x 1236 2568 e0h v224' v3+(v2-v3) x 1710 / 2949 a1h v161' v4+(v3-v4) x 1275 / 2568 e1h v225' v3+(v2-v3) x 1776 / 2949 a2h v162' v4+(v3-v4) x 1314 / 2568 e2h v226' v3+(v2-v3) x 1842 / 2949 a3h v163' v4+(v3-v4) x 1353 / 2568 e3h v227' v3+(v2-v3) x 1911 / 2949 a4h v164' v4+(v3-v4) x 1392 / 2568 e4h v228' v3+(v2-v3) x 1980 / 2949 a5h v165' v4+(v3-v4) x 1431 / 2568 e5h v229' v3+(v2-v3) x 2052 / 2949 a6h v166' v4+(v3-v4) x 1470 / 2568 e6h v230' v3+(v2-v3) x 2124 / 2949 a7h v167' v4+(v3-v4) x 1509 / 2568 e7h v231' v3+(v2-v3) x 2199 / 2949 a8h v168' v4+(v3-v4) x 1548 / 2568 e8h v232' v3+(v2-v3) x 2274 / 2949 a9h v169' v4+(v3-v4) x 1587 / 2568 e9h v233' v3+(v2-v3) x 2352 / 2949 aah v170' v4+(v3-v4) x 1626 / 2568 eah v234' v3+(v2-v3) x 2430 / 2949 abh v171' v4+(v3-v4) x 1665 / 2568 ebh v235' v3+(v2-v3) x 2511 / 2949 ach v172' v4+(v3-v4) x 1707 / 2568 ech v236' v3+(v2-v3) x 2595 / 2949 adh v173' v4+(v3-v4) x 1749 / 2568 edh v237' v3+(v2-v3) x 2679 / 2949 aeh v174' v4+(v3-v4) x 1791 / 2568 eeh v238' v3+(v2-v3) x 2766 / 2949 afh v175' v4+(v3-v4) x 1833 / 2568 efh v239' v3+(v2-v3) x 2856 / 2949 b0h v176' v4+(v3-v4) x 1875 / 2568 f0h v240' v2 b1h v177' v4+(v3-v4) x 1917 / 2568 f1h v241' v2+(v1-v2) x 96 / 1785 b2h v178' v4+(v3-v4) x 1959 / 2568 f2h v242' v2+(v1-v2) x 195 / 1785 b3h v179' v4+(v3-v4) x 2001 / 2568 f3h v243' v2+(v1-v2) x 297 / 1785 b4h v180' v4+(v3-v4) x 2043 / 2568 f4h v244' v2+(v1-v2) x 402 / 1785 b5h v181' v4+(v3-v4) x 2085 / 2568 f5h v245' v2+(v1-v2) x 510 / 1785 b6h v182' v4+(v3-v4) x 2127 / 2568 f6h v246' v2+(v1-v2) x 624 / 1785 b7h v183' v4+(v3-v4) x 2169 / 2568 f7h v247' v2+(v1-v2) x 744 / 1785 b8h v184' v4+(v3-v4) x 2211 / 2568 f8h v248' v2+(v1-v2) x 867 / 1785 b9h v185' v4+(v3-v4) x 2253 / 2568 f9h v249' v2+(v1-v2) x 996 / 1785 bah v186' v4+(v3-v4) x 2298 / 2568 fah v250' v2+(v1-v2) x 1134 / 1785 bbh v187' v4+(v3-v4) x 2343 / 2568 fbh v251' v2+(v1-v2) x 1281 / 1785 bch v188' v4+(v3-v4) x 2388 / 2568 fch v252' v2+(v1-v2) x 1437 / 1785 bdh v189' v4+(v3-v4) x 2433 / 2568 fdh v253' v2+(v1-v2) x 1605 / 1785 beh v190' v4+(v3-v4) x 2478 / 2568 feh v254' v1 bfh v191' v4+(v3-v4) x 2523 / 2568 ffh v255' v0 output voltage output voltage
data sheet s16086ej1v0ds 11 pd16724 figure 4 ? ? ? ? 3. relationship between input data and output voltage (negative side 1/2) 0.5 v dd2 ? ? ? ? 0.5 v v 9 > v 10 > v 11 > v 12 > v 13 > v 14 > v 15 > v 16 > v 17 v ss2 + 0.2 v (pol21, pol22 = l) data data 00h v0" v9 40h v64" v12 01h v1" v10 41h v65" v13+(v12-v13) x 2610 / 2658 02h v2" v11+(v10-v11) x 3180 / 3309 42h v66" v13+(v12-v13) x 2562 / 2658 03h v3" v11+(v10-v11) x 3051 / 3309 43h v67" v13+(v12-v13) x 2514 / 2658 04h v4" v11+(v10-v11) x 2922 / 3309 44h v68" v13+(v12-v13) x 2466 / 2658 05h v5" v11+(v10-v11) x 2793 / 3309 45h v69" v13+(v12-v13) x 2418 / 2658 06h v6" v11+(v10-v11) x 2664 / 3309 46h v70" v13+(v12-v13) x 2370 / 2658 07h v7" v11+(v10-v11) x 2538 / 3309 47h v71" v13+(v12-v13) x 2322 / 2658 08h v8" v11+(v10-v11) x 2412 / 3309 48h v72" v13+(v12-v13) x 2277 / 2658 09h v9" v11+(v10-v11) x 2289 / 3309 49h v73" v13+(v12-v13) x 2232 / 2658 0ah v10" v11+(v10-v11) x 2166 / 3309 4ah v74" v13+(v12-v13) x 2187 / 2658 0bh v11" v11+(v10-v11) x 2046 / 3309 4bh v75" v13+(v12-v13) x 2142 / 2658 0ch v12" v11+(v10-v11) x 1929 / 3309 4ch v76" v13+(v12-v13) x 2097 / 2658 0dh v13" v11+(v10-v11) x 1812 / 3309 4dh v77" v13+(v12-v13) x 2052 / 2658 0eh v14" v11+(v10-v11) x 1698 / 3309 4eh v78" v13+(v12-v13) x 2007 / 2658 0fh v15" v11+(v10-v11) x 1587 / 3309 4fh v79" v13+(v12-v13) x 1962 / 2658 10h v16" v11+(v10-v11) x 1476 / 3309 50h v80" v13+(v12-v13) x 1917 / 2658 11h v17" v11+(v10-v11) x 1368 / 3309 51h v81" v13+(v12-v13) x 1872 / 2658 12h v18" v11+(v10-v11) x 1263 / 3309 52h v82" v13+(v12-v13) x 1830 / 2658 13h v19" v11+(v10-v11) x 1161 / 3309 53h v83" v13+(v12-v13) x 1788 / 2658 14h v20" v11+(v10-v11) x 1059 / 3309 54h v84" v13+(v12-v13) x 1746 / 2658 15h v21" v11+(v10-v11) x 960 / 3309 55h v85" v13+(v12-v13) x 1704 / 2658 16h v22" v11+(v10-v11) x 864 / 3309 56h v86" v13+(v12-v13) x 1662 / 2658 17h v23" v11+(v10-v11) x 768 / 3309 57h v87" v13+(v12-v13) x 1620 / 2658 18h v24" v11+(v10-v11) x 675 / 3309 58h v88" v13+(v12-v13) x 1578 / 2658 19h v25" v11+(v10-v11) x 585 / 3309 59h v89" v13+(v12-v13) x 1536 / 2658 1ah v26" v11+(v10-v11) x 495 / 3309 5ah v90" v13+(v12-v13) x 1494 / 2658 1bh v27" v11+(v10-v11) x 408 / 3309 5bh v91" v13+(v12-v13) x 1452 / 2658 1ch v28" v11+(v10-v11) x 324 / 3309 5ch v92" v13+(v12-v13) x 1410 / 2658 1dh v29" v11+(v10-v11) x 240 / 3309 5dh v93" v13+(v12-v13) x 1368 / 2658 1eh v30" v11+(v10-v11) x 159 / 3309 5eh v94" v13+(v12-v13) x 1326 / 2658 1fh v31" v11+(v10-v11) x 78 / 3309 5fh v95" v13+(v12-v13) x 1287 / 2658 20h v32" v11 60h v96" v13+(v12-v13) x 1248 / 2658 21h v33" v12+(v11-v12) x 1878 / 1956 61h v97" v13+(v12-v13) x 1209 / 2658 22h v34" v12+(v11-v12) x 1803 / 1956 62h v98" v13+(v12-v13) x 1170 / 2658 23h v35" v12+(v11-v12) x 1728 / 1956 63h v99" v13+(v12-v13) x 1131 / 2658 24h v36" v12+(v11-v12) x 1656 / 1956 64h v100" v13+(v12-v13) x 1092 / 2658 25h v37" v12+(v11-v12) x 1584 / 1956 65h v101" v13+(v12-v13) x 1053 / 2658 26h v38" v12+(v11-v12) x 1515 / 1956 66h v102" v13+(v12-v13) x 1014 / 2658 27h v39" v12+(v11-v12) x 1446 / 1956 67h v103" v13+(v12-v13) x 975 / 2658 28h v40" v12+(v11-v12) x 1377 / 1956 68h v104" v13+(v12-v13) x 936 / 2658 29h v41" v12+(v11-v12) x 1311 / 1956 69h v105" v13+(v12-v13) x 897 / 2658 2ah v42" v12+(v11-v12) x 1245 / 1956 6ah v106" v13+(v12-v13) x 858 / 2658 2bh v43" v12+(v11-v12) x 1179 / 1956 6bh v107" v13+(v12-v13) x 819 / 2658 2ch v44" v12+(v11-v12) x 1116 / 1956 6ch v108" v13+(v12-v13) x 780 / 2658 2dh v45" v12+(v11-v12) x 1053 / 1956 6dh v109" v13+(v12-v13) x 741 / 2658 2eh v46" v12+(v11-v12) x 990 / 1956 6eh v110" v13+(v12-v13) x 702 / 2658 2fh v47" v12+(v11-v12) x 930 / 1956 6fh v111" v13+(v12-v13) x 663 / 2658 30h v48" v12+(v11-v12) x 870 / 1956 70h v112" v13+(v12-v13) x 624 / 2658 31h v49" v12+(v11-v12) x 810 / 1956 71h v113" v13+(v12-v13) x 585 / 2658 32h v50" v12+(v11-v12) x 750 / 1956 72h v114" v13+(v12-v13) x 546 / 2658 33h v51" v12+(v11-v12) x 693 / 1956 73h v115" v13+(v12-v13) x 507 / 2658 34h v52" v12+(v11-v12) x 636 / 1956 74h v116" v13+(v12-v13) x 468 / 2658 35h v53" v12+(v11-v12) x 579 / 1956 75h v117" v13+(v12-v13) x 429 / 2658 36h v54" v12+(v11-v12) x 522 / 1956 76h v118" v13+(v12-v13) x 390 / 2658 37h v55" v12+(v11-v12) x 468 / 1956 77h v119" v13+(v12-v13) x 351 / 2658 38h v56" v12+(v11-v12) x 414 / 1956 78h v120" v13+(v12-v13) x 312 / 2658 39h v57" v12+(v11-v12) x 360 / 1956 79h v121" v13+(v12-v13) x 273 / 2658 3ah v58" v12+(v11-v12) x 306 / 1956 7ah v122" v13+(v12-v13) x 234 / 2658 3bh v59" v12+(v11-v12) x 255 / 1956 7bh v123" v13+(v12-v13) x 195 / 2658 3ch v60" v12+(v11-v12) x 204 / 1956 7ch v124" v13+(v12-v13) x 156 / 2658 3dh v61" v12+(v11-v12) x 153 / 1956 7dh v125" v13+(v12-v13) x 117 / 2658 3eh v62" v12+(v11-v12) x 102 / 1956 7eh v126" v13+(v12-v13) x 78 / 2658 3fh v63" v12+(v11-v12) x 51 / 1956 7fh v127" v13+(v12-v13) x 39 / 2658 output voltage output voltage
data sheet s16086ej1v0ds 12 pd16724 figure 4 ? ? ? ? 3. relationship between input data and output voltage (negative side 2/2) 0.5 v dd2 ? ? ? ? 0.5 v v 9 > v 10 > v 11 > v 12 > v 13 > v 14 > v 15 > v 16 > v 17 v ss2 + 0.2 v (pol21, pol22 = l) data data 80h v128" v13 c0h v192" v14 81h v129" v14+(v13-v14) x 2529 / 2568 c1h v193" v15+(v14-v15) x 2904 / 2949 82h v130" v14+(v13-v14) x 2490 / 2568 c2h v194" v15+(v14-v15) x 2859 / 2949 83h v131" v14+(v13-v14) x 2451 / 2568 c3h v195" v15+(v14-v15) x 2814 / 2949 84h v132" v14+(v13-v14) x 2415 / 2568 c4h v196" v15+(v14-v15) x 2766 / 2949 85h v133" v14+(v13-v14) x 2379 / 2568 c5h v197" v15+(v14-v15) x 2718 / 2949 86h v134" v14+(v13-v14) x 2343 / 2568 c6h v198" v15+(v14-v15) x 2670 / 2949 87h v135" v14+(v13-v14) x 2307 / 2568 c7h v199" v15+(v14-v15) x 2622 / 2949 88h v136" v14+(v13-v14) x 2268 / 2568 c8h v200" v15+(v14-v15) x 2574 / 2949 89h v137" v14+(v13-v14) x 2229 / 2568 c9h v201" v15+(v14-v15) x 2526 / 2949 8ah v138" v14+(v13-v14) x 2190 / 2568 cah v202" v15+(v14-v15) x 2478 / 2949 8bh v139" v14+(v13-v14) x 2151 / 2568 cbh v203" v15+(v14-v15) x 2427 / 2949 8ch v140" v14+(v13-v14) x 2112 / 2568 cch v204" v15+(v14-v15) x 2376 / 2949 8dh v141" v14+(v13-v14) x 2073 / 2568 cdh v205" v15+(v14-v15) x 2325 / 2949 8eh v142" v14+(v13-v14) x 2034 / 2568 ceh v206" v15+(v14-v15) x 2274 / 2949 8fh v143" v14+(v13-v14) x 1995 / 2568 cfh v207" v15+(v14-v15) x 2223 / 2949 90h v144" v14+(v13-v14) x 1956 / 2568 d0h v208" v15+(v14-v15) x 2172 / 2949 91h v145" v14+(v13-v14) x 1917 / 2568 d1h v209" v15+(v14-v15) x 2118 / 2949 92h v146" v14+(v13-v14) x 1878 / 2568 d2h v210" v15+(v14-v15) x 2064 / 2949 93h v147" v14+(v13-v14) x 1839 / 2568 d3h v211" v15+(v14-v15) x 2010 / 2949 94h v148" v14+(v13-v14) x 1800 / 2568 d4h v212" v15+(v14-v15) x 1956 / 2949 95h v149" v14+(v13-v14) x 1761 / 2568 d5h v213" v15+(v14-v15) x 1902 / 2949 96h v150" v14+(v13-v14) x 1722 / 2568 d6h v214" v15+(v14-v15) x 1845 / 2949 97h v151" v14+(v13-v14) x 1683 / 2568 d7h v215" v15+(v14-v15) x 1788 / 2949 98h v152" v14+(v13-v14) x 1644 / 2568 d8h v216" v15+(v14-v15) x 1731 / 2949 99h v153" v14+(v13-v14) x 1605 / 2568 d9h v217" v15+(v14-v15) x 1674 / 2949 9ah v154" v14+(v13-v14) x 1566 / 2568 dah v218" v15+(v14-v15) x 1614 / 2949 9bh v155" v14+(v13-v14) x 1527 / 2568 dbh v219" v15+(v14-v15) x 1554 / 2949 9ch v156" v14+(v13-v14) x 1488 / 2568 dch v220" v15+(v14-v15) x 1494 / 2949 9dh v157" v14+(v13-v14) x 1449 / 2568 ddh v221" v15+(v14-v15) x 1431 / 2949 9eh v158" v14+(v13-v14) x 1410 / 2568 deh v222" v15+(v14-v15) x 1368 / 2949 9fh v159" v14+(v13-v14) x 1371 / 2568 dfh v223" v15+(v14-v15) x 1305 / 2949 a0h v160" v14+(v13-v14) x 1332 / 2568 e0h v224" v15+(v14-v15) x 1239 / 2949 a1h v161" v14+(v13-v14) x 1293 / 2568 e1h v225" v15+(v14-v15) x 1173 / 2949 a2h v162" v14+(v13-v14) x 1254 / 2568 e2h v226" v15+(v14-v15) x 1107 / 2949 a3h v163" v14+(v13-v14) x 1215 / 2568 e3h v227" v15+(v14-v15) x 1038 / 2949 a4h v164" v14+(v13-v14) x 1176 / 2568 e4h v228" v15+(v14-v15) x 969 / 2949 a5h v165" v14+(v13-v14) x 1137 / 2568 e5h v229" v15+(v14-v15) x 897 / 2949 a6h v166" v14+(v13-v14) x 1098 / 2568 e6h v230" v15+(v14-v15) x 825 / 2949 a7h v167" v14+(v13-v14) x 1059 / 2568 e7h v231" v15+(v14-v15) x 750 / 2949 a8h v168" v14+(v13-v14) x 1020 / 2568 e8h v232" v15+(v14-v15) x 675 / 2949 a9h v169" v14+(v13-v14) x 981 / 2568 e9h v233" v15+(v14-v15) x 597 / 2949 aah v170" v14+(v13-v14) x 942 / 2568 eah v234" v15+(v14-v15) x 519 / 2949 abh v171" v14+(v13-v14) x 903 / 2568 ebh v235" v15+(v14-v15) x 438 / 2949 ach v172" v14+(v13-v14) x 861 / 2568 ech v236" v15+(v14-v15) x 354 / 2949 adh v173" v14+(v13-v14) x 819 / 2568 edh v237" v15+(v14-v15) x 270 / 2949 aeh v174" v14+(v13-v14) x 777 / 2568 eeh v238" v15+(v14-v15) x 183 / 2949 afh v175" v14+(v13-v14) x 735 / 2568 efh v239" v15+(v14-v15) x 93 / 2949 b0h v176" v14+(v13-v14) x 693 / 2568 f0h v240" v15 b1h v177" v14+(v13-v14) x 651 / 2568 f1h v241" v16+(v15-v16) x 1689 / 1785 b2h v178" v14+(v13-v14) x 609 / 2568 f2h v242" v16+(v15-v16) x 1590 / 1785 b3h v179" v14+(v13-v14) x 567 / 2568 f3h v243" v16+(v15-v16) x 1488 / 1785 b4h v180" v14+(v13-v14) x 525 / 2568 f4h v244" v16+(v15-v16) x 1383 / 1785 b5h v181" v14+(v13-v14) x 483 / 2568 f5h v245" v16+(v15-v16) x 1275 / 1785 b6h v182" v14+(v13-v14) x 441 / 2568 f6h v246" v16+(v15-v16) x 1161 / 1785 b7h v183" v14+(v13-v14) x 399 / 2568 f7h v247" v16+(v15-v16) x 1041 / 1785 b8h v184" v14+(v13-v14) x 357 / 2568 f8h v248" v16+(v15-v16) x 918 / 1785 b9h v185" v14+(v13-v14) x 315 / 2568 f9h v249" v16+(v15-v16) x 789 / 1785 bah v186" v14+(v13-v14) x 270 / 2568 fah v250" v16+(v15-v16) x 651 / 1785 bbh v187" v14+(v13-v14) x 225 / 2568 fbh v251" v16+(v15-v16) x 504 / 1785 bch v188" v14+(v13-v14) x 180 / 2568 fch v252" v16+(v15-v16) x 348 / 1785 bdh v189" v14+(v13-v14) x 135 / 2568 fdh v253" v16+(v15-v16) x 180 / 1785 beh v190" v14+(v13-v14) x 90 / 2568 feh v254" v16 bfh v191" v14+(v13-v14) x 45 / 2568 ffh v255" v17 output voltage output voltage
data sheet s16086ej1v0ds 13 pd16724 5. relationship between input data and output pin data format: 8 bits x 2 rgbs (6 dots) input width: 48 bits (2-pixel data) (1) r,/l = h (right shift) output s 1 s 2 s 3 s 4 s 479 s 480 data d 00 to d 07 d 10 to d 17 d 20 to d 27 d 30 to d 37 d 40 to d 47 d 50 to d 57 (2) r,/l = l (left shift) output s 1 s 2 s 3 s 4 s 479 s 480 data d 00 to d 07 d 10 to d 17 d 20 to d 27 d 30 to d 37 d 40 to d 47 d 50 to d 57 pol s 12n , s 12n ? 3 , s 12n ? 4 , s 12n ? 7 , s 12n ? 8 , s 12n ? 11 note s 12n ? 1 , s 12n ? 2 , s 12n ? 5 , s 12n ? 6 , s 12n ? 9 , s 12n ? 10 note lv 0 to v 8 v 9 to v 17 hv 9 to v 17 v 0 to v 8 note n = 1, 2, ..., 80 figure 5 ? ? ? ? 1. relationship between pol and output pol s 1 s 2 s 3 s 4 s 5 s 6 s 7 s 8 s 9 s 10 s 11 s 12 ... s 477 s 478 s 479 s 480 l+ ?? ++ ?? ++ ?? + ... + ?? + l+ ?? ++ ?? ++ ?? + ... + ?? + h ? ++ ?? ++ ?? ++ ? ... ? ++ ? h ? ++ ?? ++ ?? ++ ? ... ? ++ ? l+ ?? ++ ?? ++ ?? + ... + ?? + l+ ?? ++ ?? ++ ?? + ... + ?? + h ? ++ ?? ++ ?? ++ ? ... ? ++ ? h ? ++ ?? ++ ?? ++ ? ... ? ++ ?
data sheet s16086ej1v0ds 14 pd16724 6. relationship between mode1, src1 and src2 the pd16724?s ic can control the slew rate of output amplifier. high slew rate period can be chosen from ?control from the ic outside?, or ?forming inside the ic? with mode2 pin. (1) mode2 = h src1 pin is good and can control a high slew rate period from the outside. src1 = h: high slew rate period src1 = l: low slew rate period we recommend setting as ?src1 = h? from 1 s or more before stb falling. stb src1 over 1 s (2) mode2 = l or open src2 pin is good and forms high slew rate period inside the ic. stb clk the number of clocks during stb = h period pwhp internal bias current in this mode, clock stop is prohibition during the stb = h. src2, the clk number in stb = h period, and the relation of high slew rate period are as follows. the number of clocks pwhp (the number of clocks) during stb = h period src2 = h src2 = l or open 2 to 15 16 32 16 to 31 32 64 32 to 47 48 96 48 to 63 64 128 64 to 79 80 160 80 to 95 96 192 96 to 111 112 224 from 112 128 256
data sheet s16086ej1v0ds 15 pd16724 7. relationship between mode, stb, src, orc, pol and output waveform mode1 = h or open: when it switches such as pol = h l or l h, all output pins are output reset during stb = h and synchronizing with falling of stb, gray-scale voltage is output to lcd. when it does not switch, all output pins become hi-z during stb = h. mode1 = l: regardless of pol changing, all output is hi-z during the stb = h and synchronizing with falling of stb, gray-scale voltage is outputted to lcd. figure 7 ? ? ? ? 1. mode1 = h or open selected voltage v 0 -v 8 selected voltage v 0 -v 8 reset reset hi-z stb pol s 12n , s 12n ? 3 , s 12n ? 4 , s 12n ? 7 , s 12n ? 8 , s 12n ? 11 s 12n ? 1 , s 12n ? 2 , s 12n ? 5 , s 12n ? 6 , s 12n ? 9 , s 12n ? 10 selected voltage v 9 -v 17 selected voltage v 9 -v 17 selected voltage v 0 -v 8 selected voltage v 9 -v 17 figure 7 ? ? ? ? 2. mode1 = l selected voltage v 0 -v 8 selected voltage v 0 -v 8 hi-z stb pol s 12n , s 12n ? 3 , s 12n ? 4 , s 12n ? 7 , s 12n ? 8 , s 12n ? 11 s 12n ? 1 , s 12n ? 2 , s 12n ? 5 , s 12n ? 6 , s 12n ? 9 , s 12n ? 10 hi-z hi-z selected voltage v 9 -v 17 selected voltage v 0 -v 8 selected voltage v 9 -v 17 selected voltage v 9 -v 17
data sheet s16086ej1v0ds 16 pd16724 8. relationship between stb, clk, and output waveform (mode1 = l) at the time of mode1 = l, synchronizing with the falling edge of stb, it is begun to output gray-scale voltage. figure 8 ? ? ? ? 1. output circuit block diagram sw1 sn (vx) dac output amp. ? + sw1 switches according to the level of stb. stb = l: sw1 = on stb = h: sw1 = off figure 8 ? ? ? ? 2. output circuit timing waveform clk stb sn (v x ) t stb-clk sw1: off hi-z [1] [1'] stb = h is loaded with the rising edge of clk [1]. however, when not satisfying the specification of t stb-clk , stb = h is loaded with the rising edge of the next clk [1?]. latch operation of display data is completed with the falling edge of the next clk which loaded stb= h. therefore, in order to complete latch operation of display data, it is necessary to input at least 2 clk in stb = h period. in more2 = l or open, please input the clk number according to the high slew period.
data sheet s16086ej1v0ds 17 pd16724 9. current consumption reduction function the pd16724 has a low power control function (lpc) which can switch the bias current of the output amplifier between two levels. the bias current of the output amplifier can be switched between two levels using this pin. lpc = h or open: normal power mode lpc = l: low power mode the v dd2 of static current consumption can be reduced to two thirds of that in normal mode (lpc = h or open). input a stable dc current (v dd1 /v ss1 ) to this pin. caution because the low-power control function controls the bias current in the output amplifier and regulate the over-all current consumption of the driver ic, when this occurs, the characteristics of the output amplifier will simultaneously change. therefore, when using this function, be sure to sufficiently evaluate the picture quality.
data sheet s16086ej1v0ds 18 pd16724 10. electrical specifications absolute maximum ratings (t a = 25 c, v ss1 = v ss2 = 0 v) parameter symbol ratings unit logic part supply voltage v dd1 ? 0.5 to + 4.0 v driver part supply voltage v dd2 ? 0.5 to + 17.0 v logic part input voltage v i1 ? 0.5 to v dd1 + 0.5 v driver part input voltage v i2 ? 0.5 to v dd2 + 0.5 v logic part output voltage v o1 ? 0.5 to v dd1 + 0.5 v driver part output voltage v o2 ? 0.5 to v dd2 + 0.5 v operating ambient temperature t a ? 10 to + 75 c storage temperature t stg ? 55 to + 125 c caution product quality may suffer if the absolute maximum rating is exceeded even momentarily for any parameter. that is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceeded. recommended operating range (t a = ? ? ? ? 10 to +75 c, v ss1 = v ss2 = 0 v) parameter symbol condition min. typ. max. unit logic part supply voltage v dd1 2.3 3.3 3.6 v lpc = h or open 12.0 (13.0) v driver part supply voltage v dd2 lpc = l (13.0) 15.0 v high-level input voltage v ih 0.7 v dd1 v dd1 v low-level input voltage v il 00.3 v dd1 v -corrected voltage v 0 -v 8 0.5 v dd2 + 0.5 v dd2 ? 0.2 v v 9 -v 17 0.2 0.5 v dd2 ? 0.5 v driver part output voltage v o 0.2 v dd2 ? 0.2 v clock frequency f clk 2.3 v v dd1 < 3.0 v 50 mhz 3.0 v v dd1 3.6 v 55 mhz remark the value enclosed in parentheses is a reference value.
data sheet s16086ej1v0ds 19 pd16724 electrical characteristics (t a = ? ? ? ? 10 to +75 c, v dd1 = 2.3 to 3.6 v, v dd2 = 12.0 to 15.0 v, v ss1 = v ss2 = 0 v) parameter symbol condition min. typ. max. unit input leakage current i il 1.0 a high-level output voltage v oh sthr (sthl), i oh = 0 ma v dd1 ? 0.1 v low-level output voltage v ol sthr (sthl), i ol = 0 ma 0.1 v pull-up/pull-down resistance r pu v dd1 = 3.3 v, 80 200 500 k ? mode1, mode2, src1, src2, lpc -corrected resistance r t a = 25 c, v dd2 = 15.0 v, 7.9 15.8 31.6 k ? v 0 to v 8 = v 9 to v 17 = 7.0 v driver output current i voh v x = 11.0 v, v out = 10.0 v note1 ? 40 ma i vol v x = 1.0 v, v out = 2.0 v note1 40 ma output voltage deviation ? v o t a = 25 c, v ss2 + 1.0 v to v dd2 ? 1.0 v 10 20 mv ? v p-p1 v x = 7.0 to 8.0 v note1 5 10 mv ? v p-p2 v x = 4.0 to 11.0 v note1 7 15 mv output swing voltage difference deviation ? v p-p3 v dd1 = 3.3 v, v dd2 = 15.0 v, t a = 25 c v x = 1.0 to 14.0 v note1 10 20 mv logic part dynamic current consumption i dd1 v dd1 note2 1.0 15.0 ma driver part dynamic current consumption i dd2 v dd2 , with no load note2 12.5 40.0 ma notes 1. v x refers to the output voltage of analog output pins s 1 to s 480 . v out refers to the voltage applied to analog output pins s 1 to s 480 2. f stb = 77 khz, f clk = 40 mhz the typ. values refer to an all black or all white input pattern. the max. value refers to the measured values in the dot checkerboard input pattern. switching characteristics (t a = ? 10 to +75 c, v dd1 = 2.3 to 3.6 v, v dd2 = 12.0 to 15.0 v, v ss1 = v ss2 = 0 v) parameter symbol condition min. typ. max. unit start pulse delay time t plh1 c l = 15 pf, 2.3 v v dd1 < 3.0 v 15 ns c l = 15 pf, 3.0 v v dd1 3.6 v 12 ns driver output delay time t plh2 note v dd2 = 15.0 v, t a = 25 c, 5 s t plh3 note c l = 100 pf, r l = 10 k ? 10 s t phl2 note 5 s t phl3 note 10 s input capacitance c i1 logic input, except sthr (sthl), t a = 25 c 510pf c i2 sthr (sthl), t a = 25 c1015pf note t plh2 , t phl2 refer to the arrival time from falling edge of stb to target voltage 10% (condition: v o = 0.2 v ? 14.8 v) t plh3 , t phl3 refer to the arrival time from falling edge of stb to target voltage 0.02 v (condition: v o = 3.0 v ? 13.0 v) c l1 r l1 r ln = 2 k ? c ln = 20 pf output gnd measurement point c l2 r l2 c l3 r l3 c l4 r l4 c l5 r l5
data sheet s16086ej1v0ds 20 pd16724 timing requirements (t a = ? 10 to +75 c, v dd1 = 2.3 to 3.6 v, v ss1 = 0 v, t r = t f = 5.0 ns) parameter symbol condition min. typ. max. unit clock pulse width pw clk 2.3 v v dd1 < 3.0 v 20 ns 3.0 v v dd1 3.6 v 17 ns clock pulse high period pw clk(h) 2.3 v v dd1 < 3.0 v 5 ns 3.0 v v dd1 3.6 v 3 ns clock pulse low period pw clk(l) 2.3 v v dd1 < 3.0 v 5 ns 3.0 v v dd1 3.6 v 3 ns data setup time t setup1 0ns data hold time t hold1 3ns start pulse setup time t setup2 0ns start pulse hold time t hold2 3ns pol21, pol22 setup time t setup3 0ns pol21, pol22 hold time t hold3 3ns stb pulse width pw stb 1.0 s 2clk last data timing t ldt 2clk stb-clk time t stb-clk stb clk 4ns time between stb and start pulse t stb-sth stb sthr (sthl) 2clk pol-stb time t pol-stb pol or stb 4ns stb-pol time t stb-pol stb pol or 4ns stb-src time t stb-src1 stb src1 0ns remark unless otherwise specified, the input level is defined to be v ih = 0.7 v dd1 , v il = 0.3 v dd1 .
data sheet s16086ej1v0ds 21 pd16724 switching characteristic waveform (r,/l= h, mode1 = l, mode2 = h) unless otherwise specified, v ih , v il are defined to be v ih = 0.7 v dd1 , v il = 0.3 v dd1 . pw clk(l) clk pol v x stb d n0 to d n5 sthr (1st dr.) sthl (1st dr.) pw clk(h) t r t setup2 invalid d 1 to d 6 t hold2 12 12 3808182 801 802 t f v dd1 v ss1 v dd1 v ss1 v dd1 v ss1 v dd1 v ss1 v dd1 v ss1 v dd1 v ss1 pw clk t stb-clk t stb-sth t setup1 90 % 10 % t hold1 t plh1 t pol-stb t stb-pol t plh3 t plh2 hi-z target voltage 10% target voltage 20 mv t phl2 t phl3 t ldt pw stb d 7 to d 12 d 1 to d 6 d 7 to d 12 d 469 to d 474 d 481 to d 486 d 4795 to d 4800 invalid invalid v dd1 v ss1 invalid pol21, pol22 d 475 to d 480 t hold3 t setup3 src1 v dd1 v ss1 t stb-src1
data sheet s16086ej1v0ds 22 pd16724 11. recommended mounting conditions the following conditions must be met for mounting conditions of the pd16724. for more details, refer to the semiconductor device mount manual (http://www.n ecel.com/pkg/en/mount/index.html). please consult with our sales offices in case other mounting process is used, or in case the mounting is done under different conditions. pd16724n- xxx: tcp (tab pack age) mounting condition mounting method condition thermocompression soldering heating tool 300 to 350 c, heating for 2 to 3 sec, pressure 100 g (per solder). acf (adhesive conductive film) temporary bonding 70 to 100 c, pressure 3 to 8 kg/cm 2 , time 3 to 5 sec. real bonding 165 to 180 c pressure 25 to 45 kg/cm 2 , time 30 to 40 sec. (when using the anisotropy conductive film sumizac1003 of sumitomo bakelite, ltd.) caution to find out the detailed conditions for mounting the acf part, please contact the acf manufacturing company. be sure to avoid using two or more mounting methods at a time.
data sheet s16086ej1v0ds 23 pd16724 notes for cmos devices 1 precaution against esd for semiconductors note: strong electric field, when exposed to a mos device, can cause destruction of the gate oxide and ultimately degrade the device operation. steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. environmental control must be adequate. when it is dry, humidifier should be used. it is recommended to avoid using insulators that easily build static electricity. semiconductor devices must be stored and transported in an anti-static container, static shielding bag or conductive material. all test and measurement tools including work bench and floor should be grounded. the operator should be grounded using wrist strap. semiconductor devices must not be touched with bare hands. similar precautions need to be taken for pw boards with semiconductor devices on it. 2 handling of unused input pins for cmos note: no connection for cmos device inputs can be cause of malfunction. if no connection is provided to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence causing malfunction. cmos devices behave differently than bipolar or nmos devices. input levels of cmos devices must be fixed high or low by using a pull-up or pull-down circuitry. each unused pin should be connected to v dd or gnd with a resistor, if it is considered to have a possibility of being an output pin. all handling related to the unused pins must be judged device by device and related specifications governing the devices. 3 status before initialization of mos devices note: power-on does not necessarily define initial status of mos device. production process of mos does not define the initial operation status of the device. immediately after the power source is turned on, the devices with reset function have not yet been initialized. hence, power-on does not guarantee out-pin levels, i/o settings or contents of registers. device is not initialized until the reset signal is received. reset operation must be executed immediately after power-on for devices having reset function.
pd16724 reference documents nec semiconductor device reliability/quality control system (c10983e) quality grades on nec semiconductor devices (c11531e) semiconductor device mount manual (http:// www.n ecel.com/pkg/en/mount/index.html) the information in this document is current as of march, 2003. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) (1) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. (2) "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). ? ? ? ? ? ? m8e 02. 11-1

▲Up To Search▲

Price & Availability of UPD16724N-XXX

	To Download UPD16724N-XXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .