d1907 ti im 20071127-s00006 / 72507 ti im no.a0896-1/7 LV7150V overview the LV7150V is switch for the wideband video signal. it has the two input switches by three channels. it built in the 6mhz/12mhz/30mhz-lpf. it is the best for the filter to remove the digital clock noise of the y/pb/pr or rgb analog video signal before the a/d converter. it can correspond to the full hd signal because it provides the fl at frequency response to 60mhz. functions ? two input switches three channels ? y/pb/pr and rgb signal inputs ? flat frequency response to 60mhz (bypass filter) ? 6mhz/12mhz/30mhz-lpf specifications maximum ratings at ta = 25 c parameter symbol conditions ratings unit maximum supply voltage v cc max 6 v allowable power dissipation pd max ta 75 c mounted on a specified board * 300 mw operating temperature topr -20 to +75 c storage temperature tstg -40 to +125 c note * : mounted on a specified board: 114.3mm 76.1mm 1.6mm glass epoxy ordering number : ena0896a bi-cmos ic switch for the wideband video signal (with lpf) specifications of any and all sanyo semiconductor co.,l td. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' sproductsor equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general el ectronics equipment (home appliances, av equipment, communication device, office equipment, industrial equ ipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medica l equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, t ransportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of re liability and can directly threaten human lives in case of failure or malfunction of the product or may cause har m to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for app lications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is n o consultation or inquiry before the intended use, our customer shall be solely responsible for the use.
LV7150V no.a0896-2/7 recommended operating conditions at ta = 25 c parameter symbol conditions ratings unit recommended supply voltage v cc 5 v operating supply voltage range v cc opg 4.75 to 5.25 v electrical characteristics at ta = 25 c, v cc = 5.0v input signal out ratings parameter input point signal freq mag point test condition min typ max unit v cc supply current & internal reference regulator v cc supply current v3 at non-signal, the current flows to 3pin 26 34 42 ma internal reference regulator voltage t16 the voltage of 16pin 2.8 3.0 3.2 v voltage gain voltage gain py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 100k 300mvpp t15 t13 t11 output gain for input -0.5 -0.2 0.0 db frequency response frequency response at lpf_through py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 60m 100k 300mvpp t15 t13 t11 lpf_through is selected, output gain difference between 100khz and 60mhz -3.0 -1.0 1.0 db frequency response 1 at 6mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 6m 100k 300mvpp t15 t13 t11 6mhz_lpf is selected, output gain difference between 100khz and 6mhz -3.0 0.0 1.0 db frequency response 2 at 6mhz _lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 13.5m 100k 300mvpp t15 t13 t11 6mhz_lpf is selected, output gain difference between 100khz and 13.5mhz -30.0 -20.0 db frequency response 1 at 12mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 12m 100k 300mvpp t15 t13 t11 12mhz_lpf is selected, output gain difference between 100khz and 12mhz -3.0 0.0 1.0 db frequency response 2 at 12mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 27m 100k 300mvpp t15 t13 t11 12mhz_lpf is selected, output gain difference between 100khz and 27mhz -30.0 -20.0 db frequency response 1 at 30mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 20m 100k 300mvpp t15 t13 t11 30mhz_lpf is selected, output gain difference between 100khz and 20mhz -1.0 0.0 1.0 db frequency response 2 at 30mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 30m 100k 300mvpp t15 t13 t11 30mhz_lpf is selected, output gain difference between 100khz and 30mhz -3.5 -1.0 1.5 db frequency response 3 at 30mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 74m 100k 300mvpp t15 t13 t11 30mhz_lpf is selected, output gain difference between 100khz and 74mhz -45.0 -33.0 db s/n s/n ratio at 30mhz_lpf py r g b t1a t2a t4a t5a t7a t8a sig1 30m 100k 650mvpp t15 t13 t11 30mhz_lpf is selected, the s/n ratio from 100khz to 30mhz -60.0 -50.0 db crosstalk crosstalk py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 5m 700mvpp t15 t13 t11 the ratio of the output leak of the non-selection input -60.0 -55.0 db continued on next page.
LV7150V no.a0896-3/7 continued from preceding page. input signal out ratings parameter input point signal freq mag point test condition min typ max unit group delay group delay at lpf_through py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 60m 100k 300mvpp t15 t13 t11 lpf_through is selected, delay difference between 100khz and 60mhz 0.5 2.0 ns group delay at 6mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 6m 100k 300mvpp t15 t13 t11 6mhz_lpf is selected, delay difference between 100khz and 6mhz 40.0 70.0 ns group delay at 12mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 12m 100k 300mvpp t15 t13 t11 12mhz_lpf is selected, delay difference between 100khz and 12mhz 20.0 40.0 ns group delay at 30mhz_lpf py/pb/pr r/g/b t1a t2a t4a t5a t7a t8a sig2 30m 100k 300mvpp t15 t13 t11 30mhz_lpf is selected, delay difference between 100khz and 30mhz 10.0 20.0 ns package dimensions unit : mm (typ) 3178b pin control table pin control table sw no. pin no. sw function name sw1 pin12 clamp/bias_ctl sw2 pin10 filter_ctl1 sw3 pin9 filter_ctl2 sw4 pin14 input_select_ctl input control table clamp/bias_ctl mode selected low (0 to 0.7v) clamp (y/pb/pr_mode) high (2.3v to v cc ) bias (rgb_mode) continued on next page. sanyo : ssop16(225mil) 5.2 4.4 6.4 0.22 0.65 (0.33) 18 9 16 0.5 0.15 1.5max 0.1 (1.3)
LV7150V no.a0896-4/7 continued from preceding page. filter control table filter_ctl1 filter _ctl2 mode selected low (0 to 0.7v) low (0 to 0.7v) 6mz_lpf low (0 to 0.7v) high (2.3v to v cc ) 12mz_lpf high (2.3v to v cc ) low (0 to 0.7v) 30mz_lpf high (2.3v to v cc ) high (2.3v to v cc ) lpf_through input select control table input_select_ctl mode selected low (0 to 0.7v) ch1_select high (2.3v to v cc ) ch2_select block diagram v cc gnd 1 5 13 7 py/g_in1 3 4 2 6 16 15 14 10 11 12 30mhz lpf pr/r_out py/g_out pb/b_out buf 12mhz lpf 6mhz lpf buf sw1:clamp/bias_ctl sw3:filter_ctl2 sw2&sw3: filter_ctl sw2:filter_ctl1 bias 100k 8 9 + 1 f py/g_in2 sw4:input_select_ctl vreg_3v sw4: input_select _ctl sw4: input_select _ctl sw2&sw3: filter_ctl sw2&sw3: filter_ctl pr/r_in1 pr/r_in2 pb/b_in1 pb/b_in2 sw4: input_select_ctl buf through 30mhz lpf 12mhz lpf 6mhz lpf through 30mhz lpf 12mhz lpf 6mhz lpf through bias 100k bias 100k bias 100k clamp bias 100k sw1: clamp/bias_ ctl clamp bias 100k sw1: clamp/bias_ ctl + 10 f + 10 f + 10 f + 1 f + 1 f + 1 f + 1 f + 1 f + 1 f
LV7150V no.a0896-5/7 pin function pin no. pin name dc voltage signal wave form input/output form p1 pr/r_in1 2.3v p2 pr/r_in2 2.3v p3 v cc p4 py/g_in1 y/pb/pr: 1.8v (clamp) rgb: 2.3v (bias) p5 py/g_in2 y/pb/pr: 1.8v (clamp) rgb: 2.3v (bias) p6 gnd p7 pb/b_in1 2.3v continued on next page.
LV7150V no.a0896-6/7 continued from preceding page. pin no. pin name dc voltage signal wave form input/output form p8 pb/rb_in2 2.3v p9 filter_ctl2 high: 2.3 to v cc low: 0 to 0.7v p10 filter_ctl1 high: 2.3 to v cc low: 0 to 0.7v p11 pb/b_out 2.3v p12 clp/bias_ctl high: 2.3 to v cc rgb (bias) low: 0 to 0.7v y/pb/pr (clamp) p13 py/g_out y/pb/pr: 1.8v (clamp) rgb: 2.3v (bias) continued on next page. 11 50 200 200
LV7150V no.a0896-7/7 continued from preceding page. pin no. pin name dc voltage signal wave form input/output form p14 input_select_ctl high: 2.3 to v cc ch2 low: 0 to 0.7v ch1 p15 pr/r_out 2.3v p16 reg3v 3.0v ps this catalog provides information as of december, 2007. specifications and information herein are subject to change without notice. sanyo semiconductor co.,ltd. assumes no responsibil ity for equipment failures that result from using products at values that exceed, even momentarily, rated v alues (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-qua lity high-reliability products, however, any and all semiconductor products fail or malfunction with some probab ility. it is possible that these probabilistic failures or malfunction could give rise to accident s or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the us e of the technical information and products mentioned above. information (including circuit diagrams and circuit par ameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained he rein are subject to change without notice due to product/technology improvement, etc. when designing equip ment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control l aws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd.
|
