plays in the rain provides 175 watts of output power at the ange in a rugged and compact weatherproof package, digital ready, for wideband service in the 14.50-15.35 gh z frequency band. an l-band block upconverter is included as standard. cost effective and efficient mounting at the antenna improves performance through minimized cable losses and saves cost in system design. employs a high ef ciency, dual- depressed collector helix traveling wave tube, reducing operating costs. reliable designed and built to survive in extremely adverse environmental conditions and features increased cooling margin for longer life. simple to operate user-friendly microprocessor-controlled logic with integrated ethernet computer interface. digital metering and pin diode attenuation for improved intermodulation performance. easy to maintain modular design and built-in fault diagnostic capability via remote monitor and control. global applications meets international safety standard en-60215, electromagnetic compatibility 2004/108/ec and harmonic standard en-61000-3-2 to satisfy worldwide requirements. worldwide support backed by over three decades of satellite communications experience, and cpi?s worldwide 24-hour customer support network that includes fteen regional factory service centers. 200w outdoor twt amplifier 200w outdoor twt amplifier for communications applications the T02MO 200 watt twt power ampli er with buc ? high ef ciency in an environmentally sealed compact package designed for outdoor operation 15 ghz 811 hansen way p.o. box 51625, palo alto, ca 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: satcommarketing@cpii.com www.cpii.com/satcom 15 ghz
electrical (continued) intermodulation -25 dbc max. with respect to the sum of both carriers at total output power of 40 w primary power 100-240 vac 10% single phase, 47-63 hz power consumption 600 va max. 500 va typ. at 175 w output power power factor 0.95 min. environmental (operating) ambient temperature -4 0c to +60c operating, including solar loading; -40c to +71c non-operating relative humidity 100% condensing altitude 10,000 ft. with standard adiabatic derating of 2c/1000 ft., operating; 50,000 ft., non-operating shock 20 g pk, 11 ms, 1/2 sine vibration 3 g rms acoustic noise 65 dba @ 3 ft. from ampli? er mechanical cooling forced air with integral blower l-band input connection type n female rf output connection wr-62 waveguide ? ange, grooved with unc 2b 6-32 threaded holes rf output monitor type n female, 44 db nom. dimensions (w x h x d) 8.5 x 8.5 x 15 in. max. (216 x 216 x 381 mm) weight 25 lbs (11.4 kg) options: ? remote control panel ? redundant subsystems ? integrated 1:1 switch control and drive ? integral linearizer 15 ghz for more detailed information, please refer to the corresponding cpi technical description. note: speci cations may change without notice as a result of additional data or product re nement. please contact cpi before using this information for system design. mkt 235, issue 3 03/09 pdf certificate number: 30515 specifications, T02MO with buc electrical frequency 1000 mhz to 1850 mhz (input) 14.50 to 15.35 ghz (output) output power twt 200 w min. (53.01 dbm) flange 175 w min. (52.43 dbm) bandwidth 850 mhz gain 60 db min. at rated power output; 64 db typ. at small signal gain stability 0.25 db/24hr max. (at constant drive and temp.) small signal gain slope 0.04 db/mhz max. small signal gain variation 1.0 db pk-pk across any 80 mhz band; 3.0 db pk-pk across the 850 mhz band rf level adjust range 30 db typ. input vswr 1.3:1 max. output vswr 2.2:1 max. load vswr 2.0:1 max. continuous operation; any value for operation without damage muxed external 10 mhz -115 dbc/hz at 10 hz reference phase noise -140 dbc/hz at 100 hz required (l-band input -145 dbc/hz at 1 khz 1000 - 1850 mhz) -150 dbc/hz at 10 khz (level -3 to +7 dbm) single sideband phase noise -63 dbc at 100 hz offset -73 dbc at 1 khz offset -83 dbc at 10 khz offset -93 dbc at 100 khz offset -103 dbc at 1 mhz offset -113 dbc at 10 mhz offset spurious -60 dbc max. at 175 w ? ange output am/pm conversion 2.0/db max. for a single carrier up to 40 w harmonic output -60 dbc max. at 40 w output noise power density <-70 dbw/4 khz, passband (at maximum gain)
|
