gp10-005r thru gp10-16r page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 1a general purpose plastic rectifier gp10-005r thru gp10-16r features z low forward voltage z high current capability z low leakage current z high surge capability z low cost z bevel round chip, avalanche operation mechanical data z case: do41, molded plastic use ul 94v-0 recognized flame retardant epoxy, dimensions in inches and (millimeters) z terminals: axial leads, solderable per mil-std- 202,method 208 z polarity: color band denotes cathode z weight: 0.34 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inducti ve load. for capacitive load, derate current by 20% ratings symbol gp10 -005r gp10 -01r gp10 -02r gp10 -04r gp10 -06r gp10 -08r gp10 -10r gp10 -13r gp10 -15r gp10 -16r units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 1300 1500 1600 v maximum rms voltage v rms 35 70 140 280 420 560 700 910 1050 1120 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 1300 1500 1600 v maximum average forward rectified current 0.375?(9.5mm) lead length at ta=55 c i o 1.0 a peak forward surge current, 8.3ms single half sine-wave superimposed on rated load i fsm 50 a typical thermal resistance (note 2) r ja 50 /w typical junction capacitance (note 1) c j 15 pf storage temperature range t stg - 55 to + 175 operating temperature range t op - 55 to + 175 electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol gp10 -005r gp10 -01r gp10 -02r gp10 -04r gp10 -06r gp10 -08r gp10 -10r gp10 -13r gp10 -15r gp10 -16r units maximum forward voltage at i o dc v f 1.1 v maximum reverse current at 25 i r 5 a maximum reverse current at 100 i r 50 a note: 1. measured at 1mhz and applied reverse voltage of 4.0 volts 2. both leads attached to heat sink 20 20 1t(mm) copper plate at lead length 5mm .205(5.2) .166(4.2) 1.0(25.4) min .034(0.9) .028(0.7) 1.0(25.4) min .107(2.7) .080(2.0)
gp10-005r thru gp10-16r page: 2 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 t a -ambient temperature ( o c ) fig. 3 maximum current rating effect of lead lengths resistive / inductive load 1.2 1.0 0.8 0.6 0.4 0.2 0 20 40 60 80 100 120 140 160 180 t a -ambient temperature ( o c) fig. 5-maximum forward surge vs number of cycles forward surge current amperes pk (half sine-wave) 50 40 30 20 10 0 1 10 100 no. of cycles at 60 hz fig. 6-typical reverse characteristic 1000 500 200 100 50 20 10 5 2 1 .5 .2 .1 .05 .02 .01 100 200 300 400 500 600 peak inverse voltage t j =100 o c t j =125 o c t j =75 o c t j =50 o c t j =25 o c i r -reverse current (ua) l=lead lenth l=5mm l=10mm l=20m m 10mm 10mm copper area 5.5 ? mm pc board i o -average rectified current (a) ratings and characteristic curve gp10-005r thru gp10-16r io-average rectified current (a) i pk i av 5 10 20 capacitive loads 10mm 10mm copper area 5.5 ? mm pc board resistive / inductive loads 1.2 1.0 0.8 0.6 0.4 0.2 fig. 2-maximum current rating capacitive load,10 mm lead lengths io-average rectified current (a) t a -ambient temperature ( o c) fig. 1-maximum current rating effect of copper area. resistive/inductive a=5.5
gp10-005r thru gp10-16r page: 3 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 vf-forward voltage(v) 10 1.0 0.1 .01 fig. 4 - typical forward characteristics i f -forward current (a) +150 o c +25 o c fig. 8-forward pulse current vs pulse duration 10,000 1,000 100 10 0.1us 1us 10us 100us 1ms 10ms pulse duration (seconds) i p -pulse current (a) ratings and characteristic curve gp10-005r thru gp10-16r
|
