pb lead-free parts square with 4leads type led lamps ligitek electronics co.,ltd. property of ligitek only data sheet LUR9653-30B doc. no : qw0905-LUR9653-30B rev. : a date : 27 - dec. - 2005
page 1/5 package dimensions cathode c1.25 r0.7 part no. LUR9653-30B anode 1.9 7.62 0.5 1.55 5.08 0.4 5.08 0.3 note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 2.5 0.5 0.5 7.62 0.5 3.0 3.5 0.5 4.4 0.5 ligitek electronics co.,ltd. property of ligitek only 60 30 0 directivity radiation -30 75% 50% 0 25%25% -60 50% 75% 100% 100%
ligitek electronics co.,ltd. property of ligitek only unit ratings ur symbol page 2/5 parameter part no. LUR9653-30B absolute maximum ratings at ta=25 ma ma a mw 40 120 i f i fp 10 ir 120 pd -40 ~ +85 -40 ~ +100 t opr tstg peak forward current duty 1/10@10khz forward current reverse current @5v power dissipation storage temperature operating temperature min. typ. 350 22070 min. lens 6601.5 20 max. 2.4 spectral halfwidth nm forward voltage @20ma(v) viewing angle 2 1/2 (deg) luminous intensity @20ma(mcd) peak wave length pnm emitted part nomaterial red LUR9653-30B gaalas color water clear typical electrical & optical characteristics (ta=25 ) note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance.
ligitek electronics co.,ltd. property of ligitek only 0.0 0.8 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 wavelength (nm) ambient temperature( ) fig.5 relative intensity vs. wavelength r e l a t i v e i n t e n s i t y @ 2 0 m a 1.0 0.0 600 0.5 -40-20 650700750 -40 80 20 04060100 ambient temperature( ) -20040 20100 80 60 1 f o r w a r d c u r r e n t ( m a ) r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a fig.3 forward voltage vs. temperature 0.9 1.0 1.1 1.2 0 1 1.0 1.0 0.5 1.5 2.0 2.5 3.0 1 fig.4 relative intensity vs. temperature forward voltage(v) 3.0 2.04.0 0.0 5.0 0.5 forward current(ma) 100 101000 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 10 100 1000 ur chip fig.2 relative intensity vs. forward current 2.5 1.5 1.0 2.0 3.0 page3/5 part no. LUR9653-30B
page 4/5 ligitek electronics co.,ltd. property of ligitek only dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 2.wave soldering profile soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to body) part no. LUR9653-30B time(sec) 150 260 c3sec max temp( c) 260 100 120 50 preheat 0 0 25 60 seconds max 2 /sec max 5 /sec max
ligitek electronics co.,ltd. property of ligitek only reference standard description page 5/5 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. mil-std-202:103b jis c 7021: b-11 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this test is the resistance of the device under tropical for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 this test intended to see soldering well performed or not. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 test item reliability test: part no. LUR9653-30B operating life test low temperature storage test high temperature storage test 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs high temperature high humidity test thermal shock test solderability test solder resistance test test condition 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) 1.t.sol=230 5 2.dwell time=5 1sec 1.t.sol=260 5 2.dwell time= 10 1sec.
packing specification led stopple 1. 60pcs max / tube tube stopple 2. 105tubes / inner box size : l x w x h 55cm x 22.5cm x 10cm h w l 3. 4 inner boxes / carton size : l x w x h 56.5cm x 47.5cm x 24cm i t e m n o . q ' t y : p c s n , w , : k g s g , w , : k g s h c/no: made in china l w
|
