hologram unit 1 publication date: october 2003 shh00009aed huh7285/HUH7286 for cd-r/rw drivers hologram unit for optical information processing (recordable 24 speed + readable 48 speed) features ? it is developed real with window structured high power laser diode, and realized high speed recording ? 24 writing/48 reading of cd-r/rw pos- sible ? thin (4.0 mm) package realizes thin and simple pick-up applications ? cd-r/rw tracking error signal output pin count ? huh7285: 4 pins HUH7286: 2 pins absolute maximum ratings 14 13 12 11 10 9 15 (2.3) (0.52) 0.1 max. 3.1 0.4 8.8 0.2 3.95 0.15 7 0.50.1=3.5 0.1 3.95 0.15 12.2 0.3 0.25 0.05 lead frame 1.33 0.2 0.78 0.1( at the root) 8.5 0.3 max. (3.0) apparent emitting point reference plane reference plane 0.3 0.1 1 2 3 4 5 6 7 8 16 (5.0) therest of molding gate +0 - 0.05 pkg center apparent emitting point (0.3) parameter symbol rating unit radiant power p o 90 (cw), 162 (pulse) mw reverse voltage v r(ld) 1.5 v supply voltage v cc 6v reference voltage v ref + 1.5 to + 2.3 v operating ambient temperature t opr ? 10 to + 60 c storage temperature t stg ? 40 to + 85 c unit : mm note) 1. standard corner r = 0.2 max. 2. thickness of hoe = 2.5 mm, refractive index n = 1.52 3. apparent emitting point is designed without consideration of optical pass in hoe. ldhu06-2 package
huh7285/HUH7286 2 shh00009aed block diagrams ? huh7285 r6 r6 r6 r5 r6 r6 r6 r5 15 16 1 9 8 14 13 12 11 10 2 3 4 5 6 7 ld + ld fe1 fe2 rf v cc v ref e f g h (mon) fe3 fe4 gnd gnd ld ( ? ) ? HUH7286 r8 r8 r7 r8 r8 r7 15 16 1 9 8 14 13 12 11 10 2 3 4 5 6 7 ld + ld fe1 fe2 rf v cc v ref e f n.c. n.c. fe3 fe4 gnd gnd ld ( ? ) (mon)
huh7285/HUH7286 3 shh00009aed pin descriptions ? huh7285 pin no. description 1 gnd 2 e signal out (v e ) 3 f signal out (v f ) 4 g signal out (v g ) 5 h signal out (v h ) 6 * (mon. out) value not guaranteed 7 fe3 signal out (v fe3 ) 8 fe4 signal out (v fe4 ) pin no. description 9 gnd 10 v ref 11 v cc 12 rf 13 fe2 signal out (v fe2 ) 14 fe1 signal out (v fe1 ) 15 ld( + ) 16 ld( ? ) note) * : the pin 6 must be connected to gnd level. ? HUH7286 pin no. description 1 gnd 2 e signal out (v e ) 3 f signal out (v f ) 4 n.c. 5 n.c. 6 * (mon. out) value not guaranteed 7 fe3 signal out (v fe3 ) 8 fe4 signal out (v fe4 ) pin no. description 9 gnd 10 v ref 11 v cc 12 rf 13 fe2 signal out (v fe2 ) 14 fe1 signal out (v fe1 ) 15 ld( + ) 16 ld( ? ) note) * : the pin 6 must be connected to gnd level. parameter symbol conditions min typ max unit threshold current i th cw 15 26 40 ma operating current i op cw, p o = 80 mw 85 105 125 ma operating voltage v op 1.6 1.9 2.5 v oscillation wavelength 779 785 791 nm focus error signal amplitude v fe p lo = 0.8 mw, v cc = 5 v, v ref = 1.65 v 80 135 190 mv focus error signal balance b fe ? 20 0 + 20 % main beam signal amount v te 105 175 245 mv main beam signal balance b te ? 30 0 + 30 % sub beam signal amount v tc 70 120 170 mv rf signal amount v rf 240 400 560 mv electro-optical characteristics ? unit characteristic specifications t c = 25 c 3 c
2003 sep request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technical information described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. it neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) the products described in this material are intended to be used for standard applications or general elec- tronic equipment (such as office equipment, communications equipment, measuring instruments and house- hold appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus- tion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (5) the products and product specifications described in this material are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifica- tions satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maximum rat- ing, the range of operating power supply voltage, and heat radiation characteristics. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. 2003 sep caution for safety danger this product contains gallium arsenide (gaas). gaas powder and vapor are hazardous to human health if inhaled or ingested. do not burn, destroy, cut, cleave off, or chemically dis- solve the product. follow related laws and ordinances for disposal. the product should be excluded form general industrial waste or household garbage. do not touch or look into the laser beam directly. the laser beam may cause injury to the eye or skin, or loss of eyesight.
|
