15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 02/16/12 all specifications subject to change without notice. mechanical 2x1 dual port rj45 connector AR21-3694I 10/100/1000 base-t ethernet application impedance: 100ohms transmit open circuit inductance (ocl): 350uh (min) @100khz,0.1vrms with 8ma dc bias rj45 jack cavity conforms to fcc rules and regulations part 68, sub part f storage temperature range: -40oc to +85oc industrial operating temp: -40oc to +85oc contact factory for standard temp. electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 0.1v turns ratio chip: cable (3%) insertion loss (db max) return loss (db min) with 8ma dc bias 1-100mhz 1-30mhz 30-60mhz AR21-3694I 350 1ct:1ct 1.0 18 16 60-80mhz 12 electrical speci?cations @ 25c part number common mode rejection (db min) cross talk (db min) hi-pot (vdc) 1-100mhz AR21-3694I -30 2250 1-100mhz -30 60sec.
15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 02/16/12 1. shield- 0.20mm thickness brass c2680 h. plating nickel 30u"-50u" 2. housing- standard material nylon66, glass filled polyester ul94v-0 standard color black. 3. rj terminal- plastic: pbt+30% gf, ul94v-0, standard color black. pin: 0.35mm thickness phos-bronze c5210 eh. plating: nickel 40u"-60u" for all and sn 100%, and 6u? gold plating. 4. input terminal: plastic: nylon 66 glass filled, ul94v-0, standard color black. pin: 0.35mm thickness phos-bronze c2680. plating: nickel 40u"-60u" for all and sn 100%. pcb layout schematics 2x1 dual port rj45 connector AR21-3694I notes rohs
|