a 6 date rev revisions change b chng chck 5 4 c d 6 54 dimensions are in millimeters all dimensions for reference only phone: 973 560-0019 whippany, new jersey fax: 973 560-0076 3 drawn check appr by by by date: date: date: 2 nts scale: size: part #: a part: a 1 rev: b 3 2 c d 1 tolerance unless otherwise specified x 1 x.x 0.4 x.xx 0.20 appr 1 of 1 sheet coin cell battery holder pdi-2425-x gq 03/22/02 td 05/08/02 pb 05/08/02 6.5 ?25.3 ?27.7 6.2 3.30.5 6.5 16.5 20.5 2.9 2x 0.70 2x 0.58 20.5 4 removal slots 3x ?1.5 stand offs positive contact negative contact recommended pcb layout top view 6.5 2x ?1.020.10 material and finish: insulator: nylon 66, color black, ul 94v-0 rated positive contact: beryllium copper, nickel plated negative contact: brass, nickel plated electrical specifications voltage & current rating: 3 vdc, 120 ma inter contact resistance: 100 mohm max. at both the positive and negative terminals when measured between the terminals of the pdi-2425 at 1 khz wi th low drainage (100ma max.) insulation resistance: 100 mohm min. with 500 vdc applied between the positive and negative terminals. dielectric withstanding voltage: 500 vdc applied for one minute between the positive and negative terminals. mechanical specifications battery insertion force: 0.3kg-1.0kg for the initial battery insertion spring pressure: 50g min. initial contact force at positive and negative terminals terminal strength: electric al and mechanical performance specifications should still be sati sfied whithout terminal cracking or excessive play, with a static load of 1kg applied to the terminals in any direction; however, the terminals may bend. pdi-2425-1 part number PDI-2425-0 table 2: battery holder selection guide panasonic rayovac lm 2425 cr 2420 ge sanyo varta carbide (eveready) union duracell saft cr 2430 dl 2430 dl 2420 PDI-2425-0 table 1: cross reference chart saft number part pdi size (2425) 24.0/25.0 x 2.5/3.0 nominal battery bh 1000 memory protection devices(mpd) 2s2425-0 keystone s.e.i. hld2425 105 _ rohs compliant
|