View B9304_5507561.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? epcos ag 2006. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw rx 2in1 filter gsm 850 / gsm 900 series/type: ordering code: B9304 b39941B9304g110 date: version: april 24, 2006 2.0
2 april 24, 2006 B9304 881.5 & 942.5 mhz mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet application n low-loss 2-in-1 rf filter for mobile telephone gsm850 and gsm900 bands, receive path (rx) n impedance transformation from 50 w to 100 w for both filters n unbalanced to balanced operation for both filters n very low insertion attenuation n low amplitude ripple n usable passband: filter 1 (gsm850): 25 mhz filter 2 (gsm900): 35 mhz n suitable for gprs class 1 to 12 features n package size 2.0 x1.6 x 0.68 mm 3 n package code qcs10h n rohs compatible n approximate weight 0.008 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) 0,26 0,65 0 , 325 0,50 bottom view 0,26 0,075 0,27 0 , 075 6 7 8 9 10 5 1234 side view 1,6 top view 0,54 2,0 pin configuration n 1 input [filter 1] n 4 input [filter 2] n 6,7 output, balanced [filter 2] n 8,9 output, balanced [filter 1] n 2,3,5,10 to be grounded 2,3,5,10 4 1 8 7 6 9
3 april 24, 2006 B9304 881.5 & 942.5 mhz mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 1 (gsm850) temperature range for specification: t = C10 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 100 w min. typ. @ 25 ?c max. center frequency f c 881.5 mhz maximum insertion attenuation a max 869.0 ... 894.0 mhz 1.3 2.1 1) 1) 2.5 db max at -30 ?c ... -10 ?c and 85 ?c ... 95 ?c db amplitude ripple (p-p) da 869.0 ... 894.0 mhz 0.7 1.4 db input vswr 869.0 ... 894.0 mhz 1.7 2.1 output vswr 869.0 ... 894.0 mhz 1.8 2.2 output amplitude balance (|s 31 /s 21 |) 869.0 ... 894.0 mhz C1.0 C0.5/0.5 1.0 db output phase balance ( f (s 31 ) C f (s 21 )+180?) 869.0 ... 894.0 mhz C5 C2.0/2.0 5 ? common mode suppression s cs21 869.0 ... 894.0 mhz 20 27 db 824.0 ... 995.0 mhz 20 25 db 1648.0 ... 1990.0 mhz 20 40 db 3296.0 ... 3980.0 mhz 20 33 db inter band isolation a 925.0 ... 960.0 mhz 35 44 db attenuation a 0.3 ... 480.0 mhz 45 54 db 480.0 ... 824.0 mhz 30 35 db 824.0 ... 849.0 mhz 23 35 db 914.0 ... 1738.0 mhz 23 25 db 1738.0 ... 2400.0 mhz 30 52 db 2400.0 ... 2500.0 mhz 40 50 db 2500.0 ... 6000.0 mhz 30 45 db 6000.0 ... 12750.0 2) mhz 2) values based on measurement data on pcb layout given in document test pwb and electrical verification methods, dated 11.04.2005; they may vary with different pcb layout 20 32 db
4 april 24, 2006 B9304 881.5 & 942.5 mhz mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 100 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at gsm850, gsm900 p in 15 dbm peak power of gsm signal gsm1800, gsm1900 p in 15 dbm duty cycle 4:8 tx bands
5 april 24, 2006 B9304 881.5 & 942.5 mhz mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function transfer function (wideband)
6 april 24, 2006 B9304 881.5 & 942.5 mhz mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet smith charts s 11 function s 22 function
7 april 24, 2006 B9304 881.5 & 942.5 mhz mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 2 (gsm900) temperature range for specification: t = C10 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 100 w min. typ. @ 25 ?c max. center frequency f c 942.5 mhz maximum insertion attenuation a max 925.0 ... 960.0 mhz 1.8 2.6 1) 1) 3.3 db max. at -30 ?c ... -10 ?c and 85 ?c ... 95 ?c db amplitude ripple (p-p) da 925.0 ... 960.0 mhz 1.1 1.7 db input vswr 925.0 ... 960.0 mhz 1.9 2.3 output vswr 925.0 ... 960.0 mhz 2.0 2.4 output amplitude balance (|s 31 /s 21 |) 925.0 ... 960.0 mhz C1.2 C0.7/0.7 1.2 db output phase balance ( f (s 31 ) C f (s 21 )+180?) 925.0 ... 960.0 mhz C5 C2.0/2.0 5 ? common mode suppression s cs21 925.0 ... 960.0 mhz 20 27 db 824.0 ... 995.0 mhz 20 25 db 1648.0 ... 1990.0 mhz 20 47 db 3296.0 ... 3980.0 mhz 20 35 db inter band isolation a 869.0 ... 894.0 mhz 35 40 db attenuation a 0.3 ... 480.0 mhz 45 54 db 480.0 ... 880.0 mhz 30 33 db 880.0 ... 905.0 mhz 23 32 db 905.0 ... 915.0 mhz 18 20 db 980.0 ... 1850.0 mhz 23 30 db 1850.0 ... 1920.0 mhz 30 47 db 1920.0 ... 2400.0 mhz 25 45 db 2400.0 ... 2500.0 mhz 40 45 db 2500.0 ... 6000.0 mhz 30 40 db 6000.0 ... 12750.0 mhz 20 26 db
8 april 24, 2006 B9304 881.5 & 942.5 mhz mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 100 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at gsm850, gsm900 p in 15 dbm peak power of gsm signal gsm1800, gsm1900 p in 15 dbm duty cycle 4:8 tx bands
9 april 24, 2006 B9304 881.5 & 942.5 mhz mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function transfer function (wideband)
10 april 24, 2006 B9304 881.5 & 942.5 mhz mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet smith charts s 11 function s 22 function
11 april 24, 2006 B9304 881.5 & 942.5 mhz mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. references type B9304 ordering code b39941B9304g110 marking and package c61157-a7-a1 packaging f61074-v8252-z000 date codes l_1126 s-parameters B9304_lb_nb.s3p B9304_lb_wb.s3p B9304_ub_nb.s3p B9304_ub_wb.s3p soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2006. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
12 april 24, 2006 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of passive electronic compo- nents or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer appli- cations in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic compo- nent. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be avail- able. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, ceradiode, cssp, phasecap, phasemod, sifi, sikorel, silver- cap, simid, siov, sip5d, sip5k, topcap, ultracap, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B9304

	To Download B9304 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .