.015 .38 .375 9.53 .070 1.78 ( 1.167 29.64 ) when assembled .152 3.86 .128 3.25 .315 8.00 .624 15.85 .312 7.92 .155 3.94 recommended cable trim dimensions catalog p/n: 0345-e00-c7701n notes: unless otherwise specified 1. designed for use with belden 179dt cable or equivalent. 2. material specifications: contact: copper alloy. all other metal parts: brass per astm b16. insulator: teflon per astm d1710. 3. finish specifications: contact: .000030 min gold per astm b488 over .000080 min nickel per ams-qq-n-290 (rohs). all other metal parts: .000050 min nickel per ams-qq-n-290 over copper per astm b734 (rohs). 4. electrical specifications: impedance: 75 ohms. frequency range: dc-6.0 ghz. return loss: <-20db up to 3.0 ghz, <-15db up to 6.0 ghz. 5. compliant to smpte 424m (3g-sdi) standard. 6. contact, ferrule shipped loose. 7. interface per cecc 22230. 8. strip use kings kts-8-2. 9. crimp ferrule .128 hex and contact .042 hex using kth-2021. 10. for cabling instructions see 3-661-1. p/n description qty 0345-e00-c7701n single pack 1 0345-e00-c7701nu bulk pack 400 a dcam cy 11/30/11 by date appd released per er36094 description a rev 02/25/11 wpm date approved xx/xx/xx xxx date approved 02/25/11 dcam date approved 02/23/11 dw date drawn customer sales drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx angles: 2 scale: 2:1 sht rev of a 1 1 SD0345-E00-C7701N winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 third angle dmf026 b din 1.0/2.3 75 ohm plug for belden 179dt cable (rohs compliant)
|
