data acquisition boards features rohs compliant 2002/95/ec 100 ks/s, 12-bit, 16-ch isa multifunction card 40 ks/s, 12-bit, 16-ch isa multifunction card specifcations analog input channels 16 single-ended / 8 differential resolution 12 bits max. sampling rate 100 ks/s for all input ranges (PCL-818HD/hg only) 40 ks/s for all input ranges (pcl-818l only) fifo size 1,024 samples overvoltage protection 30 vp-p input impedance 10 m w sampling modes software, pacer or external input range (v, software programmable) pcl-818l/818hd bipolar 10 5 2.5 1.25 0.625 unipolar* n/a 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25 accuracy (% of fsr 1lsb) 0.1 0.1 0.2 0.2 0.4 * note: pcl-818l doesnt support unipolar input range. pcl-818hg bipolar 10 5 1 0.5 0.1 0.05 0.01 0.005 unipolar n/a 0 ~ 10 n/a 0 ~ 1 n/a 0 ~ 0.1 n/a 0 ~ 0.01 accuracy (% of fsr 1lsb) 0.1 0.1 0.2 0.2 0.4 0.4 0.8 0.8 analog output channels 1 resolution 12 bits output rate static update output range (v, software programmable) internal reference unipolar 0 ~ 5, 0 ~ 10 external reference 0 ~ 10, 0 ~ -10 ? ? ? ? ? ? ? ? ? ? ? ? 16-ch single-ended or 8-ch differential analog input 12-bit a/d converter, with up to 100 khz sampling rate programmable gain automatic channel/gain scanning onboard fifo memory (1,024 samples, PCL-818HD/hg only) one 12-bit analog output channel 16-ch digital input and 16-ch digital output onboard programmable counter ? ? ? ? ? ? ? ? digital input channels 16 compatibility 5 v/ttl input voltage logic 0: 0.8 v max. logic 1: 2.0 v min. digital output channels 16 compatibility 5 v/ttl output voltage logic 0: 0.4 v max. logic 1: 2.4 v min. output capability sink: 8 ma source: -0.4 ma timer/counter channels 1 a/d pacer 32-bit with 10 mhz or 1 mhz time base max. and min. rates 2.5 mhz and 0.00023 hz counter one 16-bit counter with 100 khz time base general power consumption +5 v @ 210 ma typical, 500 ma max. +12 v @ 20 ma typical, 100 ma max. -12 v @ 20 ma typical, 40 ma max. i/o connector 1 x db37 female 2 x 20-pin box header dimensions (l x h) 155 x 100 mm (6.1" x 3.9") operating temperature 0 ~ 50 c (32 ~ 122 f) storage temperature -20 ~ 65 c (-4 ~ 149 f) operating humidity 5 ~ 95% rh, non-condensing (refer to iec 68-2-3) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? introduction the pcl-818l series was designed for entry-level models to the pcl-818 series. the cards have been designed with the cost-sensitive customer in mind, but still offers the same functions as the rest of the series, except that they have a 40 khz sampling rate and only accepts bipolar inputs. they are fully software and connector compatible with the PCL-818HD and pcl-818hg. this lets you upgrade your applications to these higher performance cards without hardware or software changes. the pcl-818ls bundle consists of the pcl-818l card, the pcld-8115 wiring terminal board and a db37 cable assembly. the pcld-8115 accommodates onboard passive signal conditioning components (resistors and capacitors), allowing you to easily implement a low-pass flter, a voltage attenuator or a 4 ~ 20 ma voltage converter. PCL-818HD/hg pcl-818l
www.advantech.com/products online download ordering information PCL-818HD high-performance half-size multifunction card pcl-818hg high-performance and high-gain multi. card pcl-818l low-cost high-perform. half-size multi. card pcl-818ls pcl-818l w/ pcld-8115 and db37 cable pcl-10137-1 db37 cable, 1 m pcl-10137-2 db37 cable, 2 m pcl-10137-3 db37 cable, 3 m pcld-8115 wiring board w/ cjc circuit & one db37 cable pcld-880 wiring board w/ two 20-pin flat cables & adapter ? ? ? ? ? ? ? ? ? PCL-818HD/hg pcl-818l pin assignments
|