outgassing compliant gate drive transformers gate drive transformers 1. inductance measured at 100 khz, 0.1 vrms, 0 adc 2. leakage inductance measured at 100 khz, 0.1 vrms with secondary pins shorted. 3. srf is for the primary, measured with the secondary shorted using an agilent/hp 4192 or equivalent. 4. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. turns primary leakage primary secondary volt-time srf capacitance ratio inductance 1 inductance 2 dcr max dcr max product min 3 pri to sec part number pri : sec min (h) max (h) (ohms) (ohms) (v-sec) (mhz) max (pf) cp-n0531-1010sz 1 : 1 296.0 1.5 0.795 0.655 25.8 1.75 14.0 cp-n0531-1510sz 1.5 : 1 680.0 4.0 1.65 0.860 40.8 1.00 14.0 cp-n0531-1011sz 1 : 1 : 1 264.0 0.30 1.50 1.50 (2-5; 3-4) 24.5 2.50 95.0 CP-N0531-2011SZ 2 : 1 : 1 330.0 0.60 1.40 0.650 (2-5); 0.790 (3-4) 24.5 2.00 18.0 core material ferrite terminations tin-lead over tin over nickel over phos bronze. weight 535 C 580 mg ambient temperature C55c to +125c storage temperature component: C55c to +125c. tape and reel packaging: C55c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) packaging 250/7 reel plastic tape: 16 mm wide, 0.36 mm thick, 20 mm pocket spacing, 5.54 mm pocket depth pcb washing only pure water or alcohol recommended ? designed for high switching speed, transformer coupled mosfet and igbt gate drive circuits. ? operating frequency: 50 khz C 2 mhz ? primary to secondary isolation: 1500 vdc. for 1011 and 2011, isolation between secondaries is 500 vdc. dimensions are in inches mm 6 6 4 1 1 2 3 3 5 4 pr i pr i sec sec 1010, 1510 1011, 2011 0.213 5,40 0.323 8,20 0.260 6,60 0.022 0,55 16 1 6 25 2 5 34 3 4 0.197 5,00 max dot ov er pin 1 max max 0.073 1,85 0.073 1,85 0.228 5,80 recommended land p attern 0.063 1,60 0.024 0,60 0.035 0,90 0.004 /0,10 document cp512 revised 10/09/12 ? ? coilcraft, inc. 2012 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
|
