fea tures * plastic package has u nderwriters laboratory * glass passivated chip construction * 3000 watt surage ca p a bility at 1ms * excellent clamping capability * low zener impedance * fast response time maximum ra tings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. tvs 3kp series r-6 3000 w a tt peak power 8.0 w a tts steady st a t e gpp transient vol t age suppressor dimensions in inches and (millimeters) maximum ra tings (at t a = 25 o c unle ss otherwise noted) r a tings peak pulse current with a 10/1000us waveform (note 1, fig. 3) peak forward surge current, 8.3ms single half sine wave- superimposed on rated load( jedec method ) (note 3) steady state power dissipation at t l = 75 o c lead lengths 0.375? (9.5mm) (note 2) symbol p m(av) i fsm amps units watts peak pulse power dissipation with a 10/1000us waveform (note 1, fig.1) minimum 3000 8.0 250 v alue p ppm watts i ppm amps see t able 1 2009-02 rev: o t j , t stg -55 to + 175 0 c operating a n d storage t e mperature ra n g e 3. measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. notes : 2. mounted on copper pad area of 0.8 x 0.8? ( 20 x 20mm ) per fig. 5 1. non-repetitive current pulse, per fig.3 and derated above t a = 25 o c per fig.2. .360 ( 9.1 ) .340 ( 8.6 ) dia. .052 ( 1.3 ) .048 ( 1.2 ) dia. 1.0 ( 25.4 ) min. .340 ( 8.6 ) .360 ( 9.1 ) 1.0 ( 25.4 ) min. devices for bipolar applica tions for bidirectional use c or ca suf fix for types 3kp5.0 thru 3kp110 electrical characteristics apply in both direction
rating and characteristic curves ( 3kp5.0 thru 3kp110a ) fig. 2 - pulse derating curve peak pulse power (ppp) or current t a , ambient temperature,( ) 02 5 5 0 75 100 125 150 175 20 0 100 75 50 25 0 (ipp) derating in percentage,% measured at zero bias measured at stand off voltage,v wm f = 1.0 mhz vsig = 50mvp-p tj = 25 fig. 4 - typical junction capacitance c j , capacitance, pf v( br ), breakdown voltace, volts 1.0 10 100 20 0 100000 10000 1000 100 pulse width (td) is defined as the point where the peak current decays to 50% of i ppm 10/1000usec. waveform as defined by r.e.a. peak value ippm tr = 10usec. fig. 3 - pulse waveform i ppm , peak pulse current,% t, time,ms 0 0 1.0 2.0 3.0 4.0 50 100 150 half value - i ppm 2 td fig. 1 - peak pulse power rating curve p ppm , peak pulse power, kw t p , pulse width, sec non-repetitive pulse waveform shown in fig.3 ta = 25 100 10 1.0 0.1 0.1us 1.0us 10us 100us 1.0ms 10ms p m (av), steady state power fig. 5 - steady state power derating curve tl, lead temperature ( ) 8 6 4 2 0 0 2 5 5 0 7 5 100 125 150 175 200 60hz resistive or inductive load 0.8x0.8x0.040" (20x20mm) copper heat sinks = 0.375"(9.5mm) lead lengths dissiation, watts l i fsm , peak forward surge fig. 6 - maximum non-repetitive forward number of cycles at 60 hz 300 250 200 150 100 50 0 1 10 1 0 0 8.3ms single half sine-wave (jeded method) surge current unidirectional current amperes
transient voltage suppressors 3000w series tvs diodes/r-6 ( case 12 ) 3000w type breakdown voltage v br ( volts ) min. max. @i t ( ma ) reverse stand off voltage v wm ( volts ) maximum reverse leakage at v wm i d ( ua ) maximum peak pulse current i ppm ( amps ) maximum clamping voltage at i ppm v c ( volts ) 3kp5.0 3kp5.0a 3kp6.0 3kp6.0a 3kp6.5 3kp6.5a 3kp7.0 3kp7.0a 3kp7.5 3kp7.5a 3kp8.0 3kp8.0a 3kp8.5 3kp8.5a 3kp9.0 3kp9.0a 3KP10 3KP10a 3kp11 3kp11a 3kp12 3kp12a 3kp13 3kp13a 3kp14 3kp14a 3kp15 3kp15a 3kp16 3kp16a 3kp17 3kp17a 3kp18 3kp18a 3kp20 3kp20a 3kp22 3kp22a 3kp24 3kp24a 3kp26 3kp26a 3kp28 3kp28a 3kp30 3kp30a 33.3 6.40 7.30 50 50 50 50 50 50 50 50 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2000 312.5 9.6 9.2 326 2000 5.0 7.00 6.40 6.67 8.15 6.0 5000 263 11.4 6.67 7.37 6.0 5000 291 10.3 7.22 8.82 6.5 2000 244 12.3 7.22 7.98 6.5 2000 267.8 11.2 7.78 9.51 7.0 1000 225.5 13.3 7.78 8.60 7.0 1000 250 12.0 8.33 10.2 7.5 250 209.7 14.3 8.33 9.21 7.5 250 232.5 12.9 8.89 10.9 8.0 150 200 15.0 8.89 9.83 8.0 150 50 50 20 20 15 15 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 220.6 13.6 9.44 11.5 8.5 188.7 15.9 9.44 10.4 8.5 208.3 14.4 10.0 12.2 9.0 177.5 16.9 10.0 11.1 9.0 194.8 15.4 11.1 13.6 10.0 159.6 18.8 11.1 12.3 10.0 176.4 17.0 12.2 14.9 11.0 149.2 20.1 12.2 13.5 11.0 164.8 18.2 13.3 16.3 12.0 136.4 22.0 13.3 14.7 12.0 150.7 19.9 14.4 17.6 13.0 126 23.8 14.4 15.9 13.0 139.5 21.5 15.6 19.1 14.0 116.3 25.8 15.6 17.2 14.0 129.3 23.2 16.7 20.4 15.0 111.5 26.9 16.7 18.5 15.0 122.9 24.4 17.8 21.8 16.0 104.2 28.8 17.8 19.7 16.0 115.4 26.0 18.9 23.1 17.0 98.4 30.5 18.9 20.9 17.0 108.7 27.6 20.0 24.4 18.0 93.2 32.2 20.0 22.1 18.0 102.7 29.2 22.2 27.1 20.0 83.8 35.8 22.2 24.5 20.0 92.6 32.4 24.4 29.8 22.0 76.1 39.4 24.4 26.9 22.0 84.5 26.7 32.6 24.0 69.7 26.7 29.5 24.0 77.1 28.9 35.3 26.0 64.4 28.9 31.9 26.0 71.2 31.1 38.0 28.0 59.9 31.1 34.4 28.0 66.1 33.3 40.7 30.0 30.0 56 36.8 62 35.5 43.0 38.9 46.6 42.1 50.1 45.4 53.5 48.4
transient voltage suppressors 3000w series tvs diodes/r-6 ( case 12 ) 3000w type breakdown voltage v br ( volts ) min. max. @i t ( ma ) reverse stand off voltage v wm ( volts ) maximum reverse leakage at v wm i d ( ua ) maximum peak pulse current i ppm ( amps ) maximum clamping voltage at i ppm v c ( volts ) 3kp33 3kp33a 3kp36 3kp36a 3kp40 3kp40a 3kp43 3kp43a 3kp45 3kp45a 3kp48 3kp48a 3kp51 3kp51a 3kp54 3kp54a 3kp58 3kp58a 3kp60 3kp60a 3kp64 3kp64a 3kp70 3kp70a 3kp75 3kp75a 3kp78 3kp78a 3kp85 3kp85a 3kp90 3kp90a 3KP100 3KP100a 3kp110 3kp110a 36.7 44.9 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 33.0 10 50.8 59.0 53.3 56.3 10 33.0 40.6 36.7 40.0 48.9 36.0 10 46.6 64.3 40.0 44.2 36.0 10 51.6 58.1 44.4 54.3 40.0 10 42.0 71.4 44.4 49.1 40.0 10 46.5 64.5 47.8 58.4 43.0 10 39.1 76.7 47.8 52.8 43.0 10 43.2 69.4 50.0 61.1 45.0 10 37.3 80.3 50.0 55.3 45.0 10 41.3 72.7 53.3 65.2 48.0 10 35.1 85.5 53.3 58.9 48.0 10 10 10 10 10 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 5.0 5.0 10 10 38.7 77.4 56.7 69.3 51.0 32.9 91.1 56.7 62.7 51.0 36.4 82.4 60.0 73.3 54.0 31.2 96.3 60.0 66.3 54.0 34.4 87.1 64.4 78.7 58.0 29.1 103 64.4 71.2 58.0 31.9 94 66.7 81.5 60.0 28.0 107 66.7 73.7 60.0 30.9 97 71.1 96.9 64.0 26.3 114 71.1 78.6 64.0 29.1 103 77.8 95.1 70.0 24.0 125 77.8 86.0 70.0 26.5 113 83.3 102 75.0 22.4 134 83.3 92.1 75.0 24.8 121 86.7 106 78.0 21.6 139 86.7 95.8 78.0 23.8 126 94.4 115 85.0 19.8 151 94.4 104 85.0 21.9 137 100 122 90.0 18.7 160 100 111 90.0 20.5 146 111 136 100 16.7 179 111 123 100 18.5 162 122 149 110 15.3 196 122 135 110 16.9 177 notes : 1. v br measured after i t applied for 300us. i t = square pulse or equivalent. 2. all devices ul listed under file# e211196. 3. for bidirectional use c or ca suffixs for all type (ex. 3kp5.0c,3kp110ca) 4. for bidirectional types having v wm of 10 volts and less, the i d limit is doubled. electrical characteristics apply in both directions.
rectron inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. rectron inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. data sheet specifications and its information contained are intended to provide a product description only. "typical" paramet- ers which may be included on rectron data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. rectron inc does not assume any liability arising out of the application or use of any product or circuit. rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of rectron inc. customers using or selling rectron components for use in such applications do so at their own risk and shall agree to fully indemnify rect- ron inc and its subsidiaries harmless against all claims, damages and expendit- ures. disclaimer notice
|
