.354 8.99 .591 15.01 .199 5.05 .323 8.20 ( 1.372 ) 34.85 when assembled .285 7.24 marking: kings+2065+cable code+ date code+location code see note 8 .354 8.99 .138 3.51 .748 19.00 recommended cable trimming dimensions catalog p/n:2065-e00-5cf01n notes: unless otherwise specified 1. for general series specifications, see sdprf-206. 2. material specifications: bayonet sleeve, body, contact, ferrule: brass per astm b16 insulator: teflon per astm d1710 spring washer, outer contact: beryllium copper, astm-b-194 gasket: silicone rubber 3. finish specifications: bayonet sleeve, body, ferrule: .000100min nickel per ams-qq-n-290 over copper flash per astm b734 (rohs) contact: .000030 min. gold per astm b488, over nickel per ams-qq-n-290 (rohs) all other metal parts: .000050 min nickel per ams-qq-n-290 over .000050 min copper per astm-b734 4. contact and ferrule shipped loose. 5. for use with tachii cable tcx-5cfbl or equivalent. 6. for crimping use kings kth-5000 & kth-5006 (.32 hex, .054 square flat). 7. assemble to cable using cap-e01. 8. these area have white marking. 9. electric specifications: impedance: 75 ohms frequency range: dc to 3 ghz return loss: 25 db min (dc to 3 ghz) ? ? a bnc 75 plug for tachii tcx-5cfbl (rohs compliant) rev c SD2065-E00-5CF01N w inches ? er e lec ? ronics winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 ctc cy 08/03/09 by date appd description c rev 03/11/08 dct date approved 03/11/08 dcam date approved 03/11/08 rfa date approved 03/10/08 cy date drawn customer drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .0005 angles: 2 scale: 2:1 1 sht of 1 revised per er17023
|