CPH5617 no.7370-1/4 features ? low on-resistance. ? ultrahigh-speed switching. ? 2.5v drive. ? composite type with 2 mosfets contained in the one package, improving the mounting efficiency greatly. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn7370 CPH5617 package dimensions unit : mm 2168 [CPH5617] gi im any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. n-channel silicon mosfet ultrahigh-speed switching applications 1 : drain1 2 : drain2 3 : gate2 4 : source 5 : gate1 sanyo : cph5 1.6 0.6 0.6 2.8 0.2 2.9 0.05 0.4 0.95 0.2 0.9 0.7 0.15 0.4 12 3 4 5 90503 ts im ta-3722 specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit drain-to-source voltage v dss 30 v gate-to-source voltage v gss 10 v drain current (dc) i d 150 ma drain current (pulse) i dp pw 10 m s, duty cycle 1% 600 ma allowable power dissipation p d 0.25 w channel temperature tch 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit drain-to-source breakdown voltage v (br)dss i d =1ma, v gs =0 30 v zero-gate voltage drain current i dss v ds =30v, v gs =0 10 m a gate-to-sourse leakage current i gss v gs = 8v, v ds =0 10 m a cutoff voltage v gs (off) v ds =10v, i d =100 m a 0.4 1.3 v forward transfer admittance ? yfs ? v ds =10v, i d =80ma 0.15 0.22 s marking : fz continued on next page.
CPH5617 no.7370-2/4 (top view) g1sg2 d1 d2 continued from preceding page. ratings parameter symbol conditions min typ max unit r ds (on)1 i d =80ma, v gs =4v 2.9 3.7 w static drain-to-sourse on-state resistance r ds (on)2 i d =40ma, v gs =2.5v 3.7 5.2 w r ds (on)3 i d =10ma, v gs =1.5v 6.4 12.8 w input capacitance ciss v ds =10v, f=1mhz 7.0 pf output capacitance coss v ds =10v, f=1mhz 5.9 pf reverse transfer capacitance crss v ds =10v, f=1mhz 2.3 pf turn-on delay time t d (on) see specified test circuit. 19 ns rise time t r see specified test circuit. 65 ns turn-off delay time t d (off) see specified test circuit. 155 ns fall time t f see specified test circuit. 120 ns total gate charge qg v ds =10v, v gs =10v, i d =150ma 1.58 nc gate-to-source charge qgs v ds =10v, v gs =10v, i d =150ma 0.26 nc gate-to-drain miller charge qgd v ds =10v, v gs =10v, i d =150ma 0.31 nc diode forward voltage v sd i s =150ma, v gs =0 0.87 1.2 v switching time test circuit electrical circuit pw=10 m s d.c. 1% 4v 0v v in p. g 50 w g s i d =80ma r l =187.5 w v dd =15v v out v in d CPH5617 0 0 0.02 0.2 0.06 0.04 0.08 0.4 0.10 0.12 0.14 0.16 0.6 0.8 1.0 v gs =1.5v 2.0v 2.5v 4.0v 3.5v 3.0v 6.0v 0 0 12 1 34 2 56 3 4 5 6 7 8 9 10 78910 ta=25 c 0.01 0.1 23 57 23 5 10 7 5 3 2 1.0 0 0 0.5 1.0 1.5 2.0 0.15 0.10 0.05 0.30 0.25 0.20 2.5 3.0 v ds =10v ta= --25 c 25 c 75 c 25 c --25 c ta=75 c it00029 it00030 it00031 it00032 v gs =4v i d =40ma 80ma i d -- v ds i d -- v gs r ds (on) -- v gs r ds (on) -- i d static drain-to-source on-state resistance, r ds (on) -- static drain-to-source on-state resistance, r ds (on) -- drain-to-source voltage, v ds -- v drain current, i d -- a gate-to-source voltage, v gs -- v drain current, i d -- a gate-to-source voltage, v gs -- v drain current, i d -- a
CPH5617 no.7370-3/4 0.01 0.1 23 57 23 5 10 1.0 7 5 3 2 v gs =2.5v 0.001 1.0 0.01 23 57 23 100 10 7 5 3 2 7 5 3 2 v gs =1.5v ta=75 c 25 c --25 c --25 c 25 c ta=75 c it00033 it00034 --60 0 --40 --20 1 020 2 40 60 3 4 5 6 7 80 100 120 140 160 0.01 0.01 0.1 23 57 23 5 0.1 7 5 3 2 7 5 3 2 1.0 v ds =10v 75 c 25 c ta= --25 c it00035 it00036 ? y fs ? -- i d drain current, i d -- a forward transfer admittance, ? y fs ? -- s r ds (on) -- ta static drain-to-source on-state resistance, r ds (on) -- ambient temperature, ta -- c r ds (on) -- i d static drain-to-source on-state resistance, r ds (on) -- drain current, i d -- a r ds (on) -- i d static drain-to-source on-state resistance, r ds (on) -- drain current, i d -- a i d =40ma, v gs =2.5v i d =80ma, v gs =4.0v 0.01 0.6 0.5 0.8 0.7 0.9 1.0 1.1 1.2 0.1 5 3 2 7 5 3 2 v gs =0 --25 c 25 c ta=75 c it00037 i f -- v sd diode forward voltage, v sd -- v forward current, i f -- a 0.01 10 0.1 23 57 2 1000 100 7 5 3 2 7 5 3 2 v dd =15v v gs =4v t d (on) t r t f t d (off) it00038 drain current, i d -- a sw time -- i d switching time, sw time -- ns 02468101214161820 1.0 10 7 5 3 2 7 5 3 2 100 ciss coss crss f=1mhz it00039 ciss, coss, crss -- v ds drain-to-source voltage, v ds -- v ciss, coss, crss -- pf 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1 2 3 4 5 6 7 8 9 10 v ds =10v i d =150ma it00040 v gs -- qg total gate charge, qg -- nc gate-to-source voltage, v gs -- v
CPH5617 no.7370-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of september, 2003. specifications and information herein are subject to change without notice. ps 0 20 40 60 100 120 140 0 80 0.20 0.25 0.30 0.10 0.05 0.15 160 amibient temperature, ta -- c p d -- ta allowable power dissipation, p d -- w it01962
|
