major ratings and characteristics values units 0.10 a 30 v 0.37 v, typ -65 to 125 o c electrical: mechanical: * low forward voltage drop * molded plastic sod-323, sod-523 packages * low reverse leakage * reliable high temperature operation * super barrier design * softest, fast switching capability * 125 o c operating junction temperature www.apdsemi.com version 2.0 - april 2006 1 characteristics i f(av) rectangular waveform _ _________________________________________________________________________________________________ _ SBR0130S3 sbr0130s5 sod-323 sod-523 SBR0130S3 v rrm v f @0.1a, t j =75 o c the following features are made possible in a single device: sbr0130s5 t j (operating/storage) using state-of-the-art sbr ic process technology, all dimensions in mm 0.70 (typ) f 0.30 (typ) e 0.35 (typ) d 0.85 0.70 c 1.0 0.8 b 1.80 1.60 a max min di sod-523 all dimensions in mm 0.40 0.20 h 0.10 - g 1.05 0.85 f 0.18 0.10 e 1.45 1.15 d 0.40 0.25 c 1.80 1.60 b 2.70 2.30 a max mi n di sod-323 ab c d cathode mark e f g h a b f e c d
symbol units v rm v rwm v rrm volts i o amps i fsm amps v f volts i r * ua ua t j o c note: dice are available for customer applications. * pulse width < 300 us, duty cycle < 2% www.apdsemi.com version 2.0 - april 2006 2 -65 to +125 2 typ --- --- max 0.42 0.40 30 0.10 typ --- --- max 50 500 operating and storage junction temperature _ _________________________________________________________________________________________________ _ instantaneous forward voltage i f = 100ma; t j = 25 o c i f = 100ma; t j = 75 o c maximum reverse current at rated v rm t j = 25 o c t j = 75 o c dc blocking voltage working peak reverse voltage peak repetitive reverse voltage average rectified forward current (rated v r - 20khz square wave) - 50% duty cycle peak forward surge current - 1/2 60hz sbr0130s 5 SBR0130S3 maximum ratings and electrical characteristics (at 25 o c unless otherwise specified)
www.apdsemi.com version 2.0 - april 2006 3 figure 3: current derating, case _ _________________________________________________________________________________________________ _ figure 1: typical reverse current figure 2: typical forward voltage SBR0130S3 sbr0130s5 a pd semiconductor reserves the right to make changes without further notice to any products herein. apd semiconductor makes no w arranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does apd semiconductor assume any liability arising out of the application or use of any product or cir cuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in apd semiconductor data sheets and/or specifi cations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical ex perts. apd semiconductor does not convey any license under its patent rights nor the rights of others. apd semiconductor products are not designed, intended, or authorized for use as components in systems intended for surg ical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the apd semiconductor product could create a situation where personal injury or death may occur. should buyer purchase or use apd semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold apd semiconductor and its officers, employees, subsidiar ies, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that apd semiconductor was negligent regarding the design or manufacture of the part.. 0 0.05 0.1 0 25 50 75 100 125 tc, case temp (c) if, average forward current (amps) 0.1 1 10 100 1000 0102030 vr, reverse voltage (volts) ir, reverse current (ua) tj=25c tj=75c tj=125c 0.01 0.1 1 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 vf, instantaneous forward voltage (volts) if, instantaneous forward current (amps) tj=25c tj=75c tj=125c 1 lagoon drive, suite 410, redwood city, ca 94065, usa ph: 650 508 8896 fax: 650 508 8865 homepage: www.apdsemi.com email: info@apdsemi.com
|
