View CA-170_6496926.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

298 aluminium enclosures ca series bernstein aluminium enclosures are ideally suited to housing electrical, electronic or pneumatic components. their high mechanical strength ensures excellent protection against impact and all sizes are sealed to ip 65, according to iec 529. bernstein aluminium enclosures are fitted with copper earthing screws (m4 or m6) in both the base and lid, the surface below the screws is unpainted allowing a good earth connection to be made. the captive lid screws are made of stainless steel and are held in place by a lock integrated in the lid. a gasket (for standard enclosures) is factory-fitted, and ensures conformance with the protection class. bernstein aluminium enclosures are surface-coated in ral 7001 (silver-grey), as standard. bernstein aluminium enclosures are either die-cast or chill-cast. the dimension table shows the production method used for each respective enclosure. attachment points inside the enclosure can be used to hold equipment in place (mounting rail, mounting plate, printed circuit board etc.). alternatively, the earthing points may be used. these inner attachment points are situated at different heights and positions. (refer to the illustrations for detailed positions.) technical data material die-cast aluminium or alsi 12 (cu) chill- cast gasket neoprene round seal (siliconised) alternative: neoprene round seal (silicone-free) silicone round seal lid scr ews stainless steel, captive, multi-purpose cross head alternative: C stainless steel quarter turn quick release (die-cast types only) C stainless steel hexagonal socket head screws C lead-sealed steel lid screws (9 s 20 k), slotted head coatin g ral 7001 (silver-grey) alternative: C special ral colours C special coatings t em peratur e ran ge -40 c to +80 c (neoprene gasket) alternative: -50 c to +130 c (silicone gasket) or -30 c to +100 c (explosion-hazardous area) pr otection class ip 65 alternative: higher protection class by request appr oval german lloyd: no. 91 187 - 84hh ul: file e 168772 (n)
enclosures 299 aluminium enclosures C product line dimensions/mm aluminium enclosures cast type dc = die casting lx w x h part number type cc = chilled casting 50 x 45 x 30 102.0.0000.00 ca-020 dc 58 x 64 x 36 106.0.0000.00 ca-060 dc 98 x 64 x 36 108.0.0000.00 ca-080 dc 150 x 64 x 36 110.0.0000.00 ca-100 dc 75 x 80 x 57 113.0.0000.00 ca-130 dc 75 x 80 x 57 114.0.0000.00 ca-140 dc 125 x 80 x 57 115.0.0000.00 ca-150 dc 125 x 80 x 57 116.0.0000.00 ca-160 dc 175 x 80 x 57 117.0.0000.00 CA-170 dc 175 x 80 x 57 118.0.0000.00 ca-180 dc 250 x 80 x 57 119.0.0000.00 ca-190 dc 122 x 122 x 80 121.0.0000.00 ca-210 dc 122 x 122 x 90 121.0.0000.50 ca-215 dc 122 x 122 x 80 122.0.0000.00 ca-220 dc 220 x 122 x 80 123.0.0000.00 ca-230 dc 220 x 122 x 90 123.0.0000.50 ca-235 dc 220 x 122 x 80 124.0.0000.00 ca-240 dc 360 x 122 x 80 125.0.0000.00 ca-250 dc 160 x 160 x 90 127.0.0000.00 ca-270 dc 160 x 160 x 90 128.0.0000.00 ca-280 dc 260 x 160 x 90 129.0.0000.00 ca-290 dc 260 x 160 x 90 130.0.0000.00 ca-300 dc 360 x 160 x 90 131.0.0000.00 ca-310 dc 560 x 160 x 90 133.0.0000.00 ca-330 cc 200 x 230 x 110 135.0.0000.00 ca-350 dc 200 x 230 x 180 136.0.0000.00 ca-360 cc 280 x 230 x 110 137.0.0000.00 ca-370 dc 330 x 230 x 110 138.0.0000.00 ca-380 dc 330 x 230 x 180 139.0.0000.00 ca-390 cc 401 x 230 x 110 140.0.0000.00 ca-400 dc 600 x 230 x 110 142.0.0000.00 ca-420 cc 402 x 310 x 110 145.0.0000.00 ca-450 dc 402 x 310 x 180 146.0.0000.00 ca-460 cc 600 x 310 x 110 147.0.0000.00 ca-470 cc 600 x 310 x 180 148.0.0000.00 ca-480 cc accessories for aluminium enclosures mounting plates galvanised sheet steel (thickness: ca-060 to ca-310, ca-350 to ca-400: 1.5 mm; ca-330, ca-420 to ca-480: 2.5 mm) allows mounting of additional equipment. mounting rails standard rails ts-15, ts-32 or ts-35 (steel), yellow-passivated for attachment of terminal blocks. earthing rails galvanised steel for connecting and routing of protective earth connection. external attachment brackets stainless steel for mounting enclosures without opening the lid. can be mounted in 90 steps at the base of the enclosure. external hinges for hinged attachment of the enclosure lid. swivelling angle of lid approx. 155. aluminium casting, ral 7001 coating. machining required to fit. drill template is supplied. internal hinges for hinged attachment of the enclosure lid. swivelling angle of lid approx. 95. made of stainless steel. machining required to fit. silicone lid gasket improved temperature range (-50 c to +130 c). standard type made of silicone foam.
300 model terminal width (mm): single core mm 2 stranded mm 2 nominal voltage v loading capacityt a terminal bridging mounting rail ts 15 ts 32 ts 35 part number type ca-020 ca-060 ca-080 ca-100 ca-130 ca-140 ca-150 ca-160 CA-170 ca-180 ca-190 ca-210/215/220 ca-230/235/240 ca-250 ca-270/280 ca-290/300 ca-310 ca-330 ca-350 ca-350*) ca-360 ca-360*) ca-370 ca-370*) ca-380 ca-380*) ca-390 ca-390*) ca-400 ca-400*) ca-420 ca-420*) ca-450 ca-450*) ca-450**) ca-460 ca-460*) ca-460**) ca-470 ca-470*) ca-470**) ca-480 ca-480*) ca-480**) component overview for aluminium enclosures ca series * *) assembled on 2 mounting rails **) assembled on 3 mounting rails the number of terminals is reduced when partitions are used. weidmller phoenix wieland block terminal block terminal block terminal 4 4 4 2.5 4 4 4 2.5 2.5 2.5 2.5 4 4 4 2.5 4 4 4 2.5 2.5 2.5 2.5 380 380 380 380 500 500 500 500 500 500 500 36 36 36 25 36 36 36 25 25 25 25 CCCCCCCCCCC CCCCCCCCCCC m CCCCCCCCCC m CCCCCCCCCC CCC 1CCCCCCC 1CCC 1CCCCCC C 1CCC1C 11CC CC 1CCC 1CC 11 11CC 11C 1CCC 11CC 11C 1CCC C11CC111CCC C11CC111CCC CC 1CCCCCC 1C CC 1CCC 1CC 1C CC 2CCC 2C 2CC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC CCCCCCCCCCC entrelec terminal block 5.2 6.2 5.2 6.2 8.2 10.2 12.2 2.5 4 4 4 10 16 25 1.5 4 2.5 4 6 10 16 250 380 750 750 750 750 750 20 35 26 35 46 63 85 C mmmmmm mm C m CCC CC mmmmm CC mmmmm CCC 1CCC 4CCCCCC 10CCCCCC 20CCCCCC 64CCCCC 64CCCCC 1613CCCCC 1613CCCCC 2621CCCCC 2621CCCCC 3933CCCCC C C 12 10 8 6 5 C C 31 26 19 15 13 C C 58 49 37 29 24 C C 19 16 12 9 8 C C 38 32 24 19 16 C C 57 48 36 29 24 C C 96 80 61 48 40 C C 27 22 17 13 11 C C 54 44 34 26 C C C 27 22 17 13 11 C C 54 44 34 26 C C C 42 35 27 21 18 C C 84 70 54 42 C C C 52 43 33 26 22 C C 104 86 66 52 C C C 52 43 33 26 22 C C 104 86 66 52 C C C 66 55 41 33 27 C C 132 110 82 66 C C C 104 87 65 53 44 C C 208 174 130 106 C C C 65 55 41 33 28 C C 130 110 82 66 56 C C 195 165 123 99 C C C 65 55 41 33 28 C C 130 110 82 66 56 C C 195 165 123 99 C C C 104 87 65 53 44 C C 208 174 130 106 88 C C 312 261 195 159 C C C 104 87 65 53 44 C C 208 174 130 106 88 C C 312 261 195 159 C phoenix terminal block 5.2 6.2 7.5 5.2 6.2 8.2 10.2 2.5 410 4 41016 1.5 4 6 2.5 4 6 10 500 500 500 750 750 750 750 27 36 65 36 36 65 87 C m C mmmm mmm CCCC CCC mmmm CCC mmmm CCC 1CCC 4CCCCCC 12CCCCCC 20CCCCCC 64CCCCC 644CCCC 1613CCCCC 161310CCCC 2621CCCCC 262117CCCC 393327CCCC C C C 12 10 8 6 C C C 31 26 19 15 C C C 58 49 37 29 C C C 19 16 12 9 C C C 38 32 24 19 C C C 57 48 36 29 C C C 96 80 61 48 C C C 27 22 17 13 C C C 54 44 34 26 C C C 27 22 17 13 C C C 54 44 34 C C C C 42 35 27 21 C C C 84 70 54 42 C C C 52 43 33 26 C C C 104 86 66 52 C C C 52 43 33 26 C C C 104 86 66 52 C C C 66 55 41 33 C C C 132 110 82 66 C C C 104 87 65 53 C C C 208 174 130 106 C C C 65 55 41 33 C C C 130 110 82 66 C C C 195 165 123 99 C C C 65 55 41 33 C C C 130 110 82 66 C C C 195 165 123 99 C C C 104 87 65 53 C C C 208 174 130 106 C C C 312 261 195 159 C C C 104 87 65 53 C C C 208 174 130 106 C C C 312 261 195 159 bk 4 9.40.1.0100.00 bk 6 9.40.1.0090.00 bk 12 9.40.1.0130.00 mk 3/4 9.40.1.0010.00 g 5/4 9.40.1.0020.00 g 5/6 9.40.1.0030.00 g 5/12 9.40.1.0040.00 kl-16/8 9.40.1.0050.00 kl-16/12 9.40.1.0060.00 kl-16/16 9.40.1.0070.00 kl-16/20 9.40.1.0080.00 dr 1.5/5 9.40.2.1270.00 dr 4/6 9.40.2.0940.00 ma 2.5/5 9.40.2.1090.00 m 4/6 9.40.2.1030.00 m 6/8 9.40.2.1040.00 m 10/10 9.40.2.1050.00 m 16/12 9.40.2.1060.00 mbk 9.40.2.0010.00 mbk 5/e 9.40.2.0020.00 mbk 10 9.40.2.0030.00 uk 3 n 9.40.2.0050.00 uk 5 n 9.40.2.0070.00 uk 10 9.40.2.0090.00 uk 16 9.40.2.0110.00
301 enclosures siemens terminal block terminal block screw terminals caged tension spring 4 4 10 25 4 4 10 2.5 4 6 16 2.5 4 6 750 750 750 750 750 750 750 26 35 46 85 36 36 65 mmmmmmm C m CCCCC CCCCCCC mmmmmmm CCCCCCC CCCCCCC CCCCCCC CCCCCCC CCCCCCC CCCCCCC CCCCCCC CCCCCCC CCCCCCC CCCCCCC CCCCCCC 10 10 8 6 12 10 8 27 25 20 16 31 26 20 50 46 37 30 58 49 37 16 15 12 9 19 16 12 32 30 24 19 38 32 24 49 45 37 29 57 48 36 83 76 62 49 96 80 60 22 21 17 13 26 22 17 44 42 34 26 52 44 34 22 20 17 13 26 22 10 44 40 34 26 52 49 32 36 33 27 21 42 35 26 72 66 54 42 84 70 52 44 51 33 26 51 43 32 88 82 66 52 102 86 64 44 40 33 26 51 43 32 88 80 66 52 102 86 64 56 52 42 33 65 54 41 112 104 84 66 130 108 82 89 82 67 53 103 86 65 178 164 134 106 206 172 130 56 52 42 34 65 55 41 112 104 84 68 130 110 82 163 156 126 102 195 165 123 56 52 42 33 65 54 41 112 104 84 66 130 108 82 163 156 126 99 195 162 123 89 82 67 53 103 68 65 178 164 134 106 206 172 130 267 246 201 159 309 258 195 89 82 67 53 103 86 65 178 164 134 106 206 172 130 267 246 201 159 309 258 195 9.40.2.4000.00 9.40.2.4010.00 9.40.2.4020.00 9.40.2.4030.00 9.40.2.4040.00 9.40.2.4050.00 9.40.2.4060.00 264-701 9.40.2.3020.00 264-721 9.40.2.3030.00 264-711 9.40.2.3210.00 264-731 9.40.2.3220.00 279-621 9.40.2.3230.00 280-601 9.40.2.0930.00 280-901 9.40.2.3240.00 281-601 9.40.2.3250.00 281-901 9.40.2.3260.00 282-601 9.40.2.3270.00 284-601 9.40.2.3280.00 283-601 9.40.2.3290.00 akz 2.5 pa 9.40.2.0500.00 akz 4 pa 9.40.2.0130.00 sak 2.5 pa 9.40.2.0140.00 sak 4 pa 9.40.2.0150.00 sak 6 npa 9.40.2.0160.00 sak 10 pa 9.40.2.0470.00 sak 16 pa 9.40.2.0170.00 wdu 2.5 9.40.2.1460.00 wdu 4 9.40.2.1470.00 wago terminal block 6.2 10.2 6.2 10.2 4.2 5.2 5.2 6.2 6.2 8.2 10.2 12.2 2.5 2.5 2.5 2.5 1.5 2.5 2.5 4 4 6 10 16 2.5 2.5 2.5 2.5 1.5 2.5 2.5 4 4 6 10 16 800 800 800 800 800 800 800 800 800 800 800 800 26 26 26 26 18 26 26 34 34 44 61 82 mmmmmmmmmmmm mm CCCCCCCCCC CCCCCCCCCCCC CC mmmmmmmmmm CCCCCCCCCCCC CCCCCCCCCCCC CCCCCCCCCCCC CCCCCCCCCCCC 53CCCCCCCCCC 53CCCCCCCCCC 138CCCCCCCCCC 138CCCCCCCCCC 2113CCCCCCCCCC 2113CCCCCCCCCC 3420CCCCCCCCCC CC12718CCCCCCC CC281743CCCCCCC CC513143CCCCCCC C C 10 17 25 20 20 17 17 12 10 8 C C 33 20 50 40 40 33 33 25 20 16 C C 50 30 76 60 60 50 50 37 30 28 C C 83 50 125 100 100 83 83 62 50 41 C C 23 14 35 28 28 23 23 17 14 11 C C 46 28 70 56 56 46 46 34 28 C C C 23 14 35 28 28 23 23 17 14 11 C C 46 28 70 56 56 46 46 34 28 C C C 36 22 55 44 44 37 37 27 22 18 C C 72 44 110 88 88 74 74 54 44 C C C 45 27 68 54 54 45 45 33 27 22 C C 90 54 136 108 108 90 90 66 54 C C C 45 27 68 54 54 45 45 33 27 22 C C 90 54 136 108 108 90 90 66 54 C C C 57 34 86 68 68 57 57 42 34 28 C C 114 68 172 136 136 114 114 84 68 C C C 90 54 135 108 108 90 90 67 54 45 C C 180 108 270 216 216 180 180 134 108 C C C 57 34 86 69 69 57 57 43 34 28 C C 114 68 172 138 138 114 114 86 68 56 C C 171 102 258 207 207 171 171 129 102 C C C 57 34 86 68 68 57 57 42 34 28 C C 114 68 172 136 136 114 114 84 68 56 C C 171 102 258 204 204 171 171 126 102 C C C 90 54 135 108 108 90 90 67 54 45 C C 180 108 270 216 216 180 180 134 108 90 C C 270 162 405 324 324 270 270 201 162 C C C 90 54 135 108 108 90 90 67 54 45 C C 180 108 270 216 216 180 180 134 108 90 C C 270 162 405 324 324 270 270 201 162 C weidmller terminal block 5.2 6.2 6.2 6.5 8.2 10.2 12.2 5.2 6.2 2.5 4 4 6 10 16 25 4 6 1.5 4 2.5 4 6 10 15 2.5 4 250 380 750 750 750 750 750 750 750 27 36 27 36 47 65 87 26 34 mmmmmmmmm mmm CCCCCC CCC mmmm CC CCCCCCC mm CCCCCCCCC CCCCCCCCC CCCCCCCCC CCCCCCCCC 64CCCCCCC 64CCCCCCC 1612CCCCCCC 1612CCCCCCC 2620CCCCCCC 2620CCCCCCC 4133CCCCCCC CC1097651210 C C 26 24 20 15 12 31 26 C C 48 45 37 29 24 58 48 C C 16 15 12 9 8 19 16 C C 33 30 25 19 16 38 32 C C 48 45 36 29 24 57 48 C C 86 74 61 48 40 96 80 C C 22 20 17 13 11 26 22 C C 44 40 34 26 C 52 44 C C 22 20 17 13 11 26 22 C C 44 40 34 26 C 52 44 C C 35 32 26 21 18 42 35 C C 70 64 52 42 C 84 70 C C 43 40 32 26 22 51 43 C C 86 86 64 52 C 102 86 C C 43 40 32 26 22 51 43 C C 86 86 64 52 C 102 86 C C 54 50 41 33 27 65 54 C C 108 100 C 66 C 130 108 C C 87 80 65 52 44 103 86 C C 174 160 C 104 C 206 172 C C 54 50 41 33 27 65 54 C C 108 100 82 66 54 130 108 C C 162 150 C 99 C 195 162 C C 54 50 41 33 27 65 54 C C 108 100 82 66 54 130 108 C C 162 150 C 99 C 195 162 C C 87 80 65 52 44 103 86 C C 174 160 130 104 88 206 172 C C 261 240 C 156 C 309 258 C C 87 80 65 52 44 103 86 C C 174 160 130 104 88 206 172 C C 261 240 C 156 C 309 258 8wa1011- 1df11 8wa1011- 1dg11 8wa1011- 1dh11 8wa1204 8wa2011- 1df20 8wa2011- 1dg20 8wa2011- 1dh20
302 50 x 45 x 30 mm ca-020 aluminium enclosure unterteil deckel type weight (g) external dimensions (mm) complete enclosures coated, with gasket and lid screws coated, with gasket and hex. socket head screws coated, with silicone gasket and lid screws coated, with hf gasket and lid screws saltwater-proof coating, with gasket and lid screws saltwater-proof coating, passivated, lid screws with gasket unwashed, unpainted, no accessories accessories (separate or as a mounting set) mounting plate ts 15 mounting rail ts 32 mounting rail ts 35 mounting rail grounding rail external attachment brackets external hinges side internal hinges with lid guiding** silicone gasket for wider temperature range (piece goods) max. pg threads 58 x 64 x 36 mm ca-060 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-020 70 50 x 45 x 30 part number 102.0.0000.00 l C C C 102.0.0100.00 102.0.0060.00 102.0.0340.00 C C C C C C C C C iso m 12 16 20 25 32 40 50 63 side a/b 10000000 side c/d 10000000 ** mechanical enclosure machining required l = kept in stock ca-060 160 58 x 64 x 36 part number 106.0.0000.00 l C 106.0.0940.00 106.0.0080.00 106.0.0100.00 106.0.0060.00 106.0.0380.00 951.1.0010.00 l 982.0.0000.00 l C C C C C C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 21000000 side c/d 10000000 ** mechanical enclosure machining required l = kept in stock lid base lid base
303 98 x 64 x 36 mm ca-080 aluminium enclosure 150 x 64 x 36 mm ca-100 aluminium enclosure 75 x 80 x 57 mm ca-130 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-080 220 98 x 64 x 36 part number 108.0.0000.00 l C 108.0.0090.00 108.0.0080.00 108.0.0100.00 108.0.0060.00 108.0.0420.00 951.1.0020.00 l 982.0.0050.00 l C C C C C C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 43000000 side c/d 10000000 ** mechanical enclosure machining required l = kept in stock ca-100 330 150 x 64 x 36 part number 110.0.0000.00 l C 110.0.0760.00 110.0.0080.00 110.0.0100.00 110.0.0060.00 110.0.0530.00 951.1.0030.00 l 982.0.0110.00 l C C C C C C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 64000000 side c/d 10000000 ** mechanical enclosure machining required l = kept in stock ca-130 280 75 x 80 x 57 part number 113.0.0000.00 l C 113.0.0820.00 113.0.0080.00 113.0.0100.00 113.0.0060.00 113.0.0570.00 982.3.0150.00 l 982.0.0020.00 l C C C C 980.1.0440.00 l C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 52100000 side c/d 32100000 ** mechanical enclosure machining required l = kept in stock enclosures lid base lid base lid base
304 75 x 80 x 57 mm ca-140 aluminium enclosure type weight (g) external dimensions (mm) complete enclosures coated, with gasket and lid screws coated, with gasket and hex. socket head screws coated, with silicone gasket and lid screws coated, with hf gasket and lid screws saltwater-proof coating, with gasket and lid screws saltwater-proof coating, passivated, lid screws with gasket unwashed, unpainted, no accessories accessories (separate or as a mounting set) mounting plate ts 15 mounting rail ts 32 mounting rail ts 35 mounting rail grounding rail external attachment brackets external hinges side internal hinges with lid guiding** silicone gasket for wider temperature range (piece goods) max. pg threads 125 x 80 x 57 mm ca-150 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-140 280 75 x 80 x 57 part number 114.0.0000.00 l C 114.0.0860.00 114.0.0080.00 114.0.0100.00 114.0.0060.00 114.0.0800.00 951.1.0040.00 l 982.0.0350.00 l C C C C 980.1.0440.00 l C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 52110000 side c/d 32110000 ** mechanical enclosure machining required l = kept in stock ca-150 435 125 x 80 x 57 part number 115.0.0000.00 l C 115.0.0090.00 115.0.0080.00 115.0.0100.00 115.0.0060.00 115.0.0190.00 982.3.0160.00 l 982.0.0100.00 l C C C C 980.1.0440.00 l C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 10 4320000 side c/d 32100000 ** mechanical enclosure machining required l = kept in stock lid base lid base
305 125 x 80 x 57 mm ca-160 aluminium enclosure 175 x 80 x 57 mm CA-170 aluminium enclosure 175 x 80 x 57 mm ca-180 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-160 435 125 x 80 x 57 part number 116.0.0000.00 l C 116.0.1380.00 116.0.0080.00 116.0.0100.00 116.0.0060.00 116.0.0450.00 951.1.0050.00 l 982.0.0360.00 l C C C C 980.1.0440.00 l C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 10 4320000 side c/d 42110000 ** mechanical enclosure machining required l = kept in stock CA-170 530 175 x 80 x 57 part number 117.0.0000.00 l C 117.0.0090.00 117.0.0080.00 117.0.0100.00 117.0.0060.00 117.0.0160.00 982.3.0170.00 l 982.0.0140.00 l C C C C 980.1.0440.00 l C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 14 6440000 side c/d 32100000 ** mechanical enclosure machining required l = kept in stock ca-180 530 175 x 80 x 57 part number 118.0.0000.00 l C 118.0.0440.00 118.0.0080.00 118.0.0100.00 118.0.0060.00 118.0.0400.00 951.1.0060.00 l 982.0.0370.00 l C C C C 980.1.0440.00 l C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 14 6440000 side c/d 42110000 ** mechanical enclosure machining required l = kept in stock enclosures lid base lid base lid base
306 250 x 80 x 57 mm ca-190 aluminium enclosure type weight (g) external dimensions (mm) complete enclosures coated, with gasket and lid screws coated, with gasket and hex. socket head screws coated, with silicone gasket and lid screws coated, with hf gasket and lid screws saltwater-proof coating, with gasket and lid screws saltwater-proof coating, passivated, lid screws with gasket unwashed, unpainted, no accessories accessories (separate or as a mounting set) mounting plate ts 15 mounting rail ts 32 mounting rail ts 35 mounting rail grounding rail external attachment brackets external hinges side internal hinges with lid guiding** silicone gasket for wider temperature range (piece goods) max. pg threads 122 x 122 x 80 mm ca-210 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-190 710 250 x 80 x 57 part number 119.0.0000.00 l C 119.0.0480.00 119.0.0080.00 119.0.0100.00 119.0.0060.00 119.0.0260.00 982.3.0210.00 l 982.0.0190.00 l C C C C 980.1.0440.00 l C 923.1.0050.00 l iso m 12 16 20 25 32 40 50 63 side a/b 22 9750000 side c/d 32100000 ** mechanical enclosure machining required l = kept in stock ca-210 940 122 x 122 x 80 part number 121.0.0000.00 l 121.0.0010.00 121.0.0150.00 121.0.0080.00 121.0.0100.00 121.0.0060.00 121.0.0160.00 951.1.1500.00 l C 982.1.0000.00 l 982.2.0010.00 981.0.0020.00 982.4.0240.00 l 980.1.0470.00 l 980.1.0310.00 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 12 6422000 side c/d 52210000 ** mechanical enclosure machining required l = kept in stock lid base lid base
307 122 x 122 x 90 mm ca-215 aluminium enclosure 122 x 122 x 80 mm ca-220 aluminium enclosure 220 x 122 x 80 mm ca-230 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-215 920 122 x 122 x 90 part number 121.0.0000.50 l 121.0.0010.50 121.0.0110.50 121.0.0080.50 121.0.0100.50 121.0.0060.50 121.0.0120.50 951.1.1500.00 l C 982.1.0000.00 l 982.2.0010.00 l 981.0.0020.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0310.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 12 6422000 side c/d 52210000 ** mechanical enclosure machining required l = kept in stock ca-220 940 122 x 122 x 80 part number 122.0.0000.00 l 122.0.0010.00 122.0.0270.00 122.0.0080.00 122.0.0100.00 122.0.0060.00 122.0.0610.00 951.1.0080.00 l C 982.1.0000.00 l 982.2.0010.00 l 981.0.0020.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0310.00 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 12 6422000 side c/d 52210000 ** mechanical enclosure machining required l = kept in stock ca-230 1410 220 x 122 x 80 part number 123.0.0000.00 l 123.0.0010.00 123.0.0160.00 123.0.0080.00 123.0.0100.00 123.0.0060.00 123.0.0150.00 951.1.0950.00 l C 982.1.0050.00 l 982.2.0070.00 l 981.0.0080.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0310.00 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 27 12 854000 side c/d 52210000 ** mechanical enclosure machining required l = kept in stock enclosures lid base lid base lid base
308 220 x 122 x 90 mm ca-235 aluminium enclosure type weight (g) external dimensions (mm) complete enclosures coated, with gasket and lid screws coated, with gasket and hex. socket head screws coated, with silicone gasket and lid screws coated, with hf gasket and lid screws saltwater-proof coating, with gasket and lid screws saltwater-proof coating, passivated, lid screws with gasket unwashed, unpainted, no accessories accessories (separate or as a mounting set) mounting plate ts 15 mounting rail ts 32 mounting rail ts 35 mounting rail grounding rail external attachment brackets external hinges side internal hinges with lid guiding** silicone gasket for wider temperature range (piece goods) max. pg threads 220 x 122 x 80 mm ca-240 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-235 1410 220 x 122 x 90 part number 123.0.0000.50 l 123.0.0010.50 123.0.0110.50 123.0.0080.50 123.0.0100.50 123.0.0060.50 123.0.0120.50 951.1.0950.00 l C 982.1.0050.00 l 982.2.0070.00 l 981.0.0080.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0310.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 27 12 854000 side c/d 52210000 ** mechanical enclosure machining required l = kept in stock ca-240 1410 220 x 122 x 80 part number 124.0.0000.00 l 124.0.0010.00 124.0.0970.00 124.0.0080.00 124.0.0100.00 124.0.0060.00 124.0.0820.00 951.1.0090.00 l C 982.1.0050.00 l 982.2.0070.00 l 981.0.0080.00 l 982.0.0240.00 l 980.1.0470.00 l 980.1.0310.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 27 12 854000 side c/d 52210000 ** mechanical enclosure machining required l = kept in stock lid base lid base
309 360 x 122 x 80 mm ca-250 aluminium enclosure 160 x 160 x 90 mm ca-270 aluminium enclosure 160 x 160 x 90 mm ca-280 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-250 1860 360 x 122 x 80 part number 125.0.0000.00 l 125.0.0010.00 125.0.1240.00 125.0.0080.00 125.0.0100.00 125.0.0060.00 125.0.0110.00 951.1.1740.00 l C 982.1.0120.00 l 982.2.0150.00 l 981.0.0140.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0310.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 48 21 16 96000 side c/d 52210000 ** mechanical enclosure machining required l = kept in stock ca-270 1410 160 x 160 x 90 part number 127.0.0000.00 l 127.0.0010.00 127.0.0120.00 127.0.0080.00 127.0.0100.00 127.0.0060.00 127.0.0130.00 951.1.1490.00 l C 982.1.0020.00 l 982.2.0030.00 l 981.0.0040.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 20 9642210 side c/d 84322000 ** mechanical enclosure machining required l = kept in stock ca-280 1410 160 x 160 x 90 part number 128.0.0000.00 l 128.0.0010.00 128.0.0590.00 128.0.0080.00 128.0.0100.00 128.0.0060.00 128.0.0330.00 951.1.0110.00 l C 982.1.0020.00 l 982.2.0030.00 l 981.0.0040.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 20 9642210 side c/d 84322000 ** mechanical enclosure machining required l = kept in stock enclosures lid base lid base lid base
310 260 x 160 x 90 mm ca-290 aluminium enclosure type weight (g) external dimensions (mm) complete enclosures coated, with gasket and lid screws coated, with gasket and hex. socket head screws coated, with silicone gasket and lid screws coated, with hf gasket and lid screws saltwater-proof coating, with gasket and lid screws saltwater-proof coating, passivated, lid screws with gasket unwashed, unpainted, no accessories accessories (separate or as a mounting set) mounting plate ts 15 mounting rail ts 32 mounting rail ts 35 mounting rail grounding rail external attachment brackets external hinges side internal hinges with lid guiding** silicone gasket for wider temperature range (piece goods) max. pg threads 260 x 160 x 90 mm ca-300 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-290 1960 260 x 160 x 90 part number 129.0.0000.00 l 129.0.0010.00 129.0.0470.00 129.0.0080.00 129.0.0100.00 129.0.0060.00 129.0.0110.00 951.1.0960.00 l C 982.1.0080.00 l 982.2.0110.00 l 981.0.0100.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 36 17 12 74330 side c/d 84322000 ** mechanical enclosure machining required l = kept in stock ca-300 1960 260 x 160 x 90 part number 130.0.0000.00 l 130.0.0010.00 130.0.0640.00 130.0.0080.00 130.0.0100.00 130.0.0060.00 130.0.0410.00 951.1.0120.00 l C 982.1.0080.00 l 982.2.0110.00 l 981.0.0100.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 36 17 12 74330 side c/d 84322000 ** mechanical enclosure machining required l = kept in stock lid base lid base
311 360 x 160 x 90 mm ca-310 aluminium enclosure 560 x 160 x 90 mm ca-330 aluminium enclosure 200 x 230 x 110 mm ca-350 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-310 2550 360 x 160 x 90 part number 131.0.0000.00 l 131.0.0010.00 131.0.1580.00 131.0.0080.00 131.0.0100.00 131.0.0060.00 131.0.0710.00 951.1.1750.00 l C 982.1.0120.00 l 982.2.0150.00 l 981.0.0420.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 54 26 18 11 6540 side c/d 84322000 ** mechanical enclosure machining required l = kept in stock ca-330 4310 560 x 160 x 90 part number 133.0.0000.00 l 133.0.0010.00 133.0.0560.00 133.0.0080.00 133.0.0100.00 133.0.0060.00 133.0.0220.00 951.1.0140.00 l C 982.1.0150.00 l 982.2.0180.00 l 981.0.0160.00 l 982.4.0240.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0090.00 l iso m 12 16 20 25 32 40 50 63 side a/b 84 40 28 16 10 8 6 0 side c/d 84322000 ** mechanical enclosure machining required l = kept in stock ca-350 2730 200 x 230 x 110 part number 135.0.0000.00 l 135.0.0010.00 135.0.0780.00 135.0.0080.00 135.0.0100.00 135.0.0060.00 135.0.0170.00 951.1.0150.00 l C 982.1.0030.00 l 982.2.0050.00 l 981.0.0070.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 35 15 12 84322 side c/d 26 12 853221 ** mechanical enclosure machining required l = kept in stock enclosures lid base lid base lid base
312 200 x 230 x 180 mm ca-360 aluminium enclosure type weight (g) external dimensions (mm) complete enclosures coated, with gasket and lid screws coated, with gasket and hex. socket head screws coated, with silicone gasket and lid screws coated, with hf gasket and lid screws saltwater-proof coating, with gasket and lid screws saltwater-proof coating, passivated, lid screws with gasket unwashed, unpainted, no accessories accessories (separate or as a mounting set) mounting plate ts 15 mounting rail ts 32 mounting rail ts 35 mounting rail grounding rail external attachment brackets external hinges side internal hinges with lid guiding** silicone gasket for wider temperature range (piece goods) max. pg threads 280 x 230 x 110 mm ca-370 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-360 3680 200 x 230 x 180 part number 136.0.0000.00 l 136.0.0010.00 136.0.0440.00 136.0.0080.00 136.0.0100.00 136.0.0060.00 136.0.0430.00 951.1.0150.00 l C 982.1.0030.00 l 982.2.0050.00 l 981.0.0070.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 56 32 20 13 9544 side c/d 52 27 18 12 8533 ** mechanical enclosure machining required l = kept in stock ca-370 3840 280 x 230 x 110 part number 137.0.0000.00 l 137.0.0010.00 137.0.0730.00 137.0.0080.00 137.0.0100.00 137.0.0060.00 137.0.0150.00 951.1.0160.00 l C 982.1.0090.00 l 982.2.0120.00 l 981.0.0110.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 53 25 18 11 7433 side c/d 26 12 853221 ** mechanical enclosure machining required l = kept in stock lid base lid base
313 330 x 230 x 110 mm ca-380 aluminium enclosure 330 x 230 x 180 mm ca-390 aluminium enclosure 400 x 230 x 110 mm ca-400 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-380 4270 330 x 230 x 110 part number 138.0.0000.00 l 138.0.0010.00 138.0.0520.00 138.0.0080.00 138.0.0100.00 138.0.0060.00 138.0.0140.00 951.1.0170.00 l C 982.1.0110.00 l 982.2.0140.00 l 981.0.0130.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 65 30 23 12 9543 side c/d 24 12 853221 ** mechanical enclosure machining required l = kept in stock ca-390 5300 330 x 230 x 180 part number 139.0.0000.00 l 139.0.0010.00 139.0.0200.00 139.0.0080.00 139.0.0100.00 139.0.0060.00 139.0.0120.00 951.1.0170.00 l C 982.1.0110.00 l 982.2.0140.00 l 981.0.0130.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 108 54 40 25 15 9 8 6 side c/d 52 27 18 12 8533 ** mechanical enclosure machining required l = kept in stock ca-400 4870 400 x 230 x 110 part number 140.0.0000.00 l 140.0.0010.00 140.0.0620.00 140.0.0080.00 140.0.0100.00 140.0.0060.00 140.0.0130.00 951.1.2940.00 l C 982.1.0140.00 l 982.2.0170.00 l 981.0.0150.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 80 38 27 17 11 6 5 4 side c/d 26 12 853221 ** mechanical enclosure machining required l = kept in stock enclosures lid base lid base lid base
314 600 x 230 x 110 mm ca-420 aluminium enclosure type weight (g) external dimensions (mm) complete enclosures coated, with gasket and lid screws coated, with gasket and hex. socket head screws coated, with silicone gasket and lid screws coated, with hf gasket and lid screws saltwater-proof coating, with gasket and lid screws saltwater-proof coating, passivated, lid screws with gasket unwashed, unpainted, no accessories accessories (separate or as a mounting set) mounting plate ts 15 mounting rail ts 32 mounting rail ts 35 mounting rail grounding rail external attachment brackets external hinges side internal hinges with lid guiding** silicone gasket for wider temperature range (piece goods) max. pg threads 402.5 x 310 x 110 mm ca-450 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-420 6380 600 x 230 x 110 part number 142.0.0000.00 l 142.0.0010.00 142.0.0550.00 142.0.0080.00 142.0.0100.00 142.0.0060.00 142.0.0110.00 951.1.0190.00 l C 982.1.0160.00 l 982.2.0190.00 l 981.0.0170.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0060.00 l iso m 12 16 20 25 32 40 50 63 side a/b 120 56 42 24 16 8 8 6 side c/d 28 13 853221 ** mechanical enclosure machining required l = kept in stock ca-450 5810 402.5 x 310 x 110 part number 145.0.0000.00 l 145.0.0010.00 145.0.0520.00 145.0.0080.00 145.0.0100.00 145.0.0060.00 145.0.0250.00 951.1.0200.00 l C 982.1.0140.00 l 982.2.0170.00 l 981.0.0150.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0090.00 l iso m 12 16 20 25 32 40 50 63 side a/b 80 38 27 17 11 6 5 4 side c/d 38 21 13 75432 ** mechanical enclosure machining required l = kept in stock lid base lid base
315 402.5 x 310 x 180 mm ca-460 aluminium enclosure 600 x 310 x 110 mm ca-470 aluminium enclosure 600 x 310 x 180 mm ca-480 aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support ca-460 7420 402.5 x 310 x 180 part number 146.0.0000.00 l 146.0.0010.00 146.0.0130.00 146.0.0080.00 146.0.0100.00 146.0.0060.00 146.0.0490.00 951.1.0200.00 l C 982.1.0140.00 l 982.2.0170.00 l 981.0.0150.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0090.00 l iso m 12 16 20 25 32 40 50 63 side a/b 136 68 50 30 21 12 10 8 side c/d 74 38 28 18 12 8 6 3 ** mechanical enclosure machining required l = kept in stock ca-470 8480 600 x 310 x 110 part number 147.0.0000.00 l 147.0.0010.00 147.0.0560.00 147.0.0080.00 147.0.0100.00 147.0.0060.00 147.0.0620.00 951.1.0210.00 l C 982.1.0160.00 l 982.2.0190.00 l 981.0.0170.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0090.00 l iso m 12 16 20 25 32 40 50 63 side a/b 120 56 42 24 16 8 8 6 side c/d 38 17 13 75432 ** mechanical enclosure machining required l = kept in stock ca-480 10840 600 x 310 x 180 part number 148.0.0000.00 l 148.0.0010.00 148.0.0450.00 148.0.0080.00 148.0.0100.00 148.0.0060.00 148.0.0170.00 951.1.0210.00 l C 982.1.0160.00 l 982.2.0190.00 l 981.0.0170.00 l 982.4.0230.00 l 980.1.0470.00 l 980.1.0300.00 l 923.1.0090.00 l iso m 12 16 20 25 32 40 50 63 side a/b 200 100 76 46 30 18 14 12 side c/d 74 38 28 18 12 8 6 5 ** mechanical enclosure machining required l = kept in stock enclosures lid base lid base lid base

▲Up To Search▲

Price & Availability of CA-170

	To Download CA-170 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .