View LP156WH3-TLL2_6581614.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 specification for approval 15.6 hd tft lcd title model necp customer *when you obtain standard approval, please use the above model name without suffix lp156wh3 *model tll2 suffix lg display co., ltd. supplier ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature approved by products engineering dept. lg display co., ltd prepared by reviewed by signature approved by n. j. seong / manager prepared by reviewed by signature approved by s. s. han / engineer c. h. hwang / engineer h. s. jung / engineer www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 contents 23~25 appendix. label & packing assembly a 21 environment 7-3 11 signal timing waveforms 3-5 9-10 lvds signal timing specification 3-3 28-30 appendix. enhanced extended display identification data a 26-27 precautions 9 12 8 interface connections 3-2 color input data refernece 3-6 22 designation of lot mark 8-1 22 packing form 8-2 packing 8 21 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 electrical specifications 3 6-7 electrical charactreistics 3-1 11 signal timing specifications 3-4 13 power sequence 3-7 14-16 optical sfecifications 4 17-19 mechanical characteristics 5 20 reliablity 6 international standards 7 21 safety 7-1 page item no www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 record of revisions 0.0 update the electric characteristics spec. 6 jun. 21.2010 0.3 update the packing assembly and pallet assembly 23~24 update the label information ( lgd lot mark and yea r ) 22 update the condition of the shock test (non-operati on) 20 update dimension of the drawing 18~19 add typical viewing angle 14 0.0 add maximum and typical weight 4 may 20. 2010 0.2 add label information about box and pallet 23 add dimension of hole to metal frame edge add pcb thickness 18 add mating connector (20456-040t-0x, i-pex) 8 (b/l power @ 100%, 50%, 6% pwm duty) update eedid table 25~27 update color coordinates 14 update the power sequence timing 13 update signal timing specifications 11 0.0 update the electrical characteristics spec. 6 april. 21. 2010 0.1 1.0 - edid ver final specification - jul. 01. 2010 1.0 update the input current description 6, 7 update the shock test (non-operation) condition 20 first draft (preliminary specification) - april. 15. 2010 0.0 description page revision date revision no www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 1. general description general features control & data power edid signal & power tft-lcd panel (hd, gip, tn) 1 timing control (tcon) block timing control (tcon) block user connector 40 pin eeprom block for edid eeprom block for edid source driver (bottom) led backlight assy tclks lvds 1port vcc led driver block led driver block fb1~6 eeprom block for tcon operating eeprom block for tcon operating power block power block dvcc, avdd vgh, vgl, gma m i n i - l v d s gip clks, dsc vout_led dvcc vled led_en pwm 768 1366 the lp156wh3 is a color active matrix liquid crysta l display with an integral led backlight system. th e matrix employs a-si thin film transistor as the act ive element. it is a transmissive type display oper ating in the normally white mode. this tft-lcd has 15.6 inch es diagonally measured active display area with hd resolution (1366 horizontal by 768 vertical pixel a rray). each pixel is divided into red, green and bl ue sub- pixels or dots which are arranged in vertical strip es. gray scale or the brightness of the sub-pixel c olor is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,14 4 colors. the lp156wh3 has been designed to apply the interface method that enables low power, high speed, low emi. the lp156wh3 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important . in combination with the vertical arrangement of t he sub- pixels, the lp156wh3 characteristics provide an exc ellent flat display for office automation products such as notebook pc. transmissive mode, normally white display operating mode glare treatment (3h) of the front polarizer surface treatment 6-bit, 262,144 colors color depth 1366 horiz. by 768 vert. pixels rgb strip arrangeme nt pixel format 200 cd/m 2 (typ.) luminance, white total 3.3w(typ.) logic : 1.0w (typ.@ mosaic), b/l : 2.4w (typ.@ v led 12v) power consumption 410g (typ.), 420g (max.) weight yes rohs compliance yes for all bfr / pvc / as free 0.252mm x 0.252 mm pixel pitch 15.6 inches diagonal active screen size www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 2. absolute maximum ratings the following are maximum values which, if exceeded , may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] units 1 %rh 90 10 h op operating ambient humidity 1 %rh 90 10 h st storage humidity 1 c 60 -20 h st storage temperature 1 c 50 0 t op operating temperature at 25 5 c vdc 4.0 -0.3 vcc power input voltage max min parameter notes values symbol note : 1. temperature and relative humidity range a re shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 3. electrical specifications 3-1. electrical characteristics table 2. electrical characteristics the lp156wh3 requires two power inputs. the first logic is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second backlight is the input about led bl with led driver . pwm duty (i led ) 23 20 - 6% 8 120 105 - 50% 2 3 ma i cc_max 4 ma 1500 - - i cc_p power supply inrush current 5 110 100 90 z lvds lvds impedance 1.2 1.0 345 300 - mosaic led power consumption 2.8 2.4 - 13 hrs - - 12,000 life time v 0.3 - 0 v led_en_l led_en low voltage v 3.6 - 3.0 v led_en_h led_en high voltage k 60 40 20 z pwm led_en impedance v 0.3 - 0 v pwm_l pwm low level voltage v 3.6 - 3.0 v pwm_h pwm high level voltage 12 hz 1000 - 200 f pwm pwm frequency k 60 40 20 z pwm pwm impedance 11 % 0.3 - 0 - pwm jitter 10 % 100 - 6 pwm duty ratio 9 ma 1000 - - i led_p led power inrush current w p led 8 ma 230 200 - 100% led power input current (even) 7 v 21.0 12.0 7.0 v led led power input voltage backlight : ( with led driver) 6 ma 10 - - i edid edid input current v 3.6 3.3 3.0 v edid edid input voltage 2 w p cc power consumption ma 435 380 - i cc black power supply input current (even) 1 v 3.6 3.3 3.0 v cc power supply input voltage logic : max typ min notes unit values symbol parameter www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 10% 90% 0.5ms 3.3v 0v 10% 90% 0.5ms 12.0v 0v rising time vcc rising time v led note) 1. the measuring position is the connector of lcm a nd the test conditions are under 25 , fv = 60hz, black pattern. 2. the specified icc current and power consumption a re under the vcc = 3.3v , 25 , fv = 60hz condition whereas mosaic pattern is displayed and fv is the frame frequency. (max current pattern is black, measured by multi-me ter=even) 3. this spec. is the max load condition for the cab le impedance designing. (measured by multi-meter=ev en) 4. the below figures are the measuring vcc condition and the vcc control block lgd used. the vcc condition is same the minimum of t1 at power on sequence. 5. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 6. the specified i edid current are under the vcc = 3.3v @ frequency = 330kh z condition. 7. the measuring position is the connector of lcm a nd the test conditions are under 25 . 8. the current and power consumption with led drive r are under the vled = 12.0v , 25 , dimming of 100%, 50%, 6% luminance whereas white pattern is di splayed and fv is the frame frequency. 9. the below figures are the measuring vled conditi on and the vled control block lgd used. vled control block is same with vcc control block. 10. the operation of led driver below minimum dimmi ng ratio may cause flickering or reliability issue. 11. if jitter of pwm is bigger than maximum. it ma y cause flickering. 12. this spec. is not effective at 100% dimming rat io as an exception because it has dc level equivale nt to 0hz. in spite of acceptable range as defined, th e pwm frequency should be fixed and stable for more consistent brightness control at any specific level desired. 13. the life time is determined as the time at whic h brightness of lcd is 50% compare to that of minimu m value at table 7. these led backlight has 6 strings on it and the typical current of leds string is b ase on typical current at table 7. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 3-2. interface connections table 3. module connector pin configuration (cn1) 1 40 [lcd module rear view] led backlight power (7v-21v) vled 40 led backlight power (7v-21v) vled 39 led backlight power (7v-21v) vled 38 no connection nc 37 led backlight on/off led_en 36 system pwm signal input for dimming pwm 35 no connection nc 34 led backlight ground gnd 33 led backlight ground gnd 32 led backlight ground gnd 31 no connection nc 20 no connection nc 19 positive lvds differential clock input orxc+ 18 negative lvds differential clock input orxc- 17 high speed ground gnd 16 positive lvds differential data input orx2+ 15 negative lvds differential data input orx2- 14 high speed ground gnd 13 positive lvds differential data input orx1+ 12 negative lvds differential data input orx1- 11 no connection nc 30 lcd logic and driver power (3.3v typ.) vcc 2 lcd logic and driver power (3.3v typ.) vcc 3 ddc power (3.3v) v eedid 4 no connection nc 5 ddc clock clk eedid 6 ddc data data eedid 7 positive lvds differential data input orx0+ 9 [interface chip] 1. lcd : siw, sw0641(lcd controller) including lvds receiver. 2. system : siw lvdsrx or equivalent * pin to pin compatible with lvds [connector] uju is050-l40b-c10 lsmtron gt05q-40s-h10 or equivalent [mating connector] 20345-#40e-## series, 20453-040t-0x, i-pex or equivalent [connector pin arrangement] no connection nc 1 negative lvds differential data input orx0- 8 high speed ground gnd 10 high speed ground gnd 22 no connection nc 23 no connection nc 24 high speed ground gnd 25 no connection nc 26 no connection nc 27 high speed ground gnd 28 no connection nc 29 notes description symbol pin nc no connection 21 this lcd employs two interface connections, a 40 pi n connector used for the module electronics interfa ce and the other connector used for the integral backlight system. [note 1] if pwm duty is changed. brightness can be changed. -pwm duty spec. : 200hz ~1khz -pwm high level : 3 ~ 3.6v -pwm low level : 0 ~ 0.3v [note 2] led_en on : 3 ~ 3.6v led_en off : 0 ~ 0.3v www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 notes unit max min symbol description 85mhz > fclk 65mhz ps + 400 - 400 t skew lvds clock to data skew margin - - - 65mhz > fclk 25mhz % 3 - f dev maximum deviation of input clock frequency during ssc khz 200 - f mod maximum modulation frequency of input clock during ssc - 1/7 - 600 t clk + 1/7 t skew_eo lvds clock to clock skew margin (even to odd) ps + 600 t skew - 1.2 - typ - v vdd 0.3 v in lvds input voltage range - v vdd- |v id |/2 |v id | /2 v cm lvds common mode voltage - mv 600 100 |v id | lvds differential voltage notes unit max min symbol description 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications vdd=1.8v www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 < clock skew margin between channel > < lvds data format > 3-3-3. data format 1) lvds 1 port < spread spectrum > time f center f max f min f mod 1 f center * f dev freq. g0 r5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 de vsync hsync b5 b4 b3 b2 x b7 b6 g7 g6 r7 r6 r1 r0 g2 g1 b3 b2 r7 r6 g0 b1 de x current(nth) cycle r5 r4 b0 g5 vsync hsync b7 b6 r3 r2 g4 g3 b5 b4 g7 g6 previous (n-1)th cycle next(n+1)th cycle rclk+ ra+/- rb+/- rc+/- rd+/- www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 3-4. signal timing specifications table 4. timing table this is the signal timing required at the input of the user connector. all of the interface signal ti ming should be satisfied with the following specifications and spe cifications of lvds tx/rx for its proper operation. 3-5. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk 768 768 768 t wva width-active 1366 1366 1366 t wha width-active tclk 124 80 72 t hbp horizontal back porch 48 48 8 t hfp horizontal front porch thp 20 14 8 t vbp vertical back porch 5 3 1 t vfp vertical front porch thp 801 790 779 t vp period 8 5 2 t wv width 40 32 23 t wh width tclk 1586 1526 1470 t hp period hsync vsync data enable mhz 75 72.3 70 f clk frequency dclk note unit max typ min symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter t he color. the table below provides a reference for color versus data input. table 5. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) green 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (01) ... 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (00) red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (01) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 red (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red (63) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (62) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (63) blue (00) white yellow magenta cyan blue green red black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b 5 b 4 b 3 b 2 b 1 b 0 g 5 g 4 g 3 g 2 g 1 g 0 r 5 r 4 r 3 r 2 r 1 r 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 note) 1. do not insert the mating cable when system turn on. 2. valid data have to meet 3-3. lvds signal timin g specifications 3. lvds, led_en and pwm need to be on pull-down con dition on invalid status. 4. lgd recommend the rising sequence of vled after the vcc and valid status of lvds turn on. table 6. power sequence table ms 5000 - 0.5 t 13 ms - - 0.5 t 12 ms - - 10 t 11 ms - - 10 t 10 ms - - 10 t 9 ms - - 10 t 8 max. typ. min. units value led parameter ms - - 200 t 5 ms - - 400 t 4 ms 10 - 3 t 7 ms - - 200 t 6 ms 50 - 0 t 3 ms 50 - 0 t 2 ms 10 - 0 t 1 max. typ. min. units value logic parameter 3-7. power sequence interface signal, v i lvds power supply input vcc dimming control signal of led bl pwm led input voltage vled led on/off control signal led_en t 7 90% 10% 10% 0v 90% t 1 t 2 t 3 t 4 t 5 t 6 0v 0v (low) t 8 t 10 t 11 t 9 valid data 0v valid data 0v (off) 90% 10% t 12 90% 3.0v 3.0v 10% t 13 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 4. optical specification table 7. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 72.3mhz fig. 1 optical characteristic measurement equipment and method lcd module optical stage(x,y) equipment 500mm 50mm optical characteristics are determined after the un it has been on and stable for approximately 20 min utes in a dark environment at 25 c . the values specified are at an approximate distan ce 50cm from the lcd surface at a viewing angle of and equal to 0 . fig. 1 presents additional information concerning t he measurement equipment and method. 6 gray scale % - 45 - c/g color gamut 5 viewing angle color coordinates 0.149 0.119 0.089 by 0.343 0.313 0.283 wx white y axis, down ( =270 ) y axis, up ( =90 ) x axis, left ( =180 ) x axis, right( =0 ) degree - 45 40 r degree - 45 40 l degree - 15 10 u degree - 35 30 d blue 0.359 0.329 0.299 wy green red 0.360 0.330 0.300 gx 0.585 0.555 0.525 gy 0.620 0.590 0.560 rx 0.380 0.350 0.320 ry 3 % 1.6 1.4 - white luminance variation 0.183 0.153 0.123 bx 4 ms 25 16 - tr r + tr d response time max typ min 1 - 500 400 cr contrast ratio 2 cd/m 2 - 200 170 l wh surface luminance, white parameter symbol notes units values www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 100 l63 74.0 l55 12.2 l23 21.0 l31 34.8 l39 52.5 l47 5.4 l15 1.5 l7 0.1 l0 luminance [%] (typ) gray level note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point acro ss the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. lwh = average(l1,l2, l5) 3. the variation in surface luminance , the panel t otal variation ( white) is determined by measuring ln at each test position 1 through 13 and then defined as following numerical formula. for more information see fig 2. maximum(l1,l2, l13) - minimum(l1,l2, l13) white( = * 100(%) maximum(l1,l2, l13) 4. response time is the time required for the displ ay to transition from white to black (rise time, tr r) and from black to white(decay time, trd). for additiona l information see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to t he lcd surface. for more information see fig 4. 6. gray scale specification * fv = 60hz www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 fig. 4 viewing angle normal y eye = 0 , right = 180 , left = 270 , down = 90 , up fig. 3 response time the response time is defined as the following figur e and shall be measured by switching the input sign al for black and white. tr r tr d 100 90 10 0 % optical response white black white : active area a : h/4 mm b : v/4 mm points: 13 points h,v active area 1 3 2 5 4 h a b v 6 7 8 9 10 11 12 13 10mm 10mm fig. 2 luminance www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 5. mechanical characteristics the contents provide general mechanical characteris tics for the model lp156wh3. in addition the figure s in the next page are detailed mechanical drawing of the lcd. 410g (typ.), 420g (max.) weight 0.50 + 0.05 / -0.03 mm 0.50 + 0.05 / -0.03 mm upper glass (c/f glass) mother glass thickness lower glass (tft glass) 3.8mm (max) thickness 193.54 mm vertical hard coating(3h), glare treatment of the front pola rizer (haze 0%) surface treatment 196.8 0.5mm vertical 344.23 mm horizontal active display area 347.5 0.5mm horizontal bezel area www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 note) unit:[mm], general tolerance: 0.5mm this panel is asymmetric. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 19 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 note) unit:[mm], general tolerance: 0.5mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 20 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the pr actical display function when the display quality test is conducted under normal operating condition. 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr altitude operatin g storage / shipment 7 - half sine wave, 180g, 2ms one shock of each six faces (i.e. run 180g 2ms for all six faces) shock test (non-operating) 6 sine wave, 5 ~ 150hz, 1.5g, 0.37oct/min 3 axis, 30min/axis vibration test (non-operating) 5 ta= 0 c, 240h low temperature operation test 4 ta= 50 c, 50%rh, 240h high temperature operation test 3 ta= -20 c, 240h low temperature storage test 2 ta= 60 c, 240h high temperature storage test 1 conditions test item no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 7. international standards 7-1. safety c) en 60950-1:2006 + a11:2009, european committee f or electrotechnical standardization (cenelec). information technology equipment - safety - part 1 : general requirements. a) ul 60950-1, second edition, underwriters laborat ories inc. information technology equipment - safety - part 1 : general requirements. b) can/csa c22.2 no.60950-1-07, second edition, c anadian standards association. information technology equipment - safety - part 1 : general requirements. d) iec 60950-1:2005, second edition, the internation al electrotechnical commission (iec). information technology equipment - safety - part 1 : general requirements. 7-3. environment a) rohs, directive 2002/95/ec of the european parli ament and of the council of 27 january 2003 7-2. emc a) ansi c63.4 american national standard for meth ods of measurement of radio-noise emissions from low-voltage electrical and electroni c equipment in the range of 9 khz to 40 ghz. american national standards institute (ansi), 2003. b) cispr 22 information technology equipment C radi o disturbance characteristics C limit and methods of measurement." international special comm ittee on radio interference (cispr), 2005. c) cispr 13 sound and television broadcast receive rs and associated equipment C radio disturbance characteristics C limits and method of measurement." international special committee on radio interference (cispr), 2006. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 8. packing 8-2. packing form 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. a) package quantity in one box : 30pcs b) box size :473mm x 364mm x 338mm mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 a 2011 b 2012 lgd lot mark www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 # appendix-1 box label pallet label lgd lot mark quantity shipping date lgd lot mark quantity shipping date www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 # appendix-2 packing assembly art 100x70 label 8 swr4 box 6 al al bag 9 opp 70mmx300m tape 7 eps packing, tray bottom 5 eps packing, tray top 4 masking 20mmx50m tape 3 ldpe bag 2 lcd module 1 material description no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 25 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 # appendix-3 pallet assembly lldpe wrap 6 steel clip 7 pp band 5 art 100x70 label 4 swr4 angle cover 3 plywood pallet 2 packing assy 1 material description no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 26 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. (10) when handling the lcd module, it needs to hand le with care not to give mechanical stress to the p cb and mounting hole area. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becom es longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 27 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static electricity is generated between the film and polar izer. this should be peeled off slowly and carefully by p eople who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarize r with a small amount of glue. if some stress is ap plied to rub the protection film against the polarizer du ring the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film witho ut rubbing it against the polarizer. (3) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the polarizer af ter the protection film is peeled off. (4) you can remove the glue easily. when the glue r emains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cot ton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 28 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 appendix a. enhanced extended display identificatio n data (eedid tm ) 1/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 0 00 header 00 00000000 1 01 header ff 11111111 2 02 header ff 11111111 3 03 header ff 11111111 4 04 header ff 11111111 5 05 header ff 11111111 6 06 header ff 11111111 7 07 header 00 00000000 8 08 eisa manufacture code ( 3 character id ) lgd 30 00110000 9 09 eisa manufacture code (compressed asc ) e4 11100100 10 0a panel supplier reserved - product code 02c1h c1 11000001 11 0b ( hex. lsb first ) 02 00000010 12 0c lcd module serial no - preferred but optional ("0" if not used) 00 00000000 13 0d lcd module serial no - preferred but optional ("0" if not used) 00 00000000 14 0e lcd module serial no - preferred but optional ("0" if not used) 00 00000000 15 0f lcd module serial no - preferred but optional ("0" if not used) 00 00000000 16 10 week of manufacture 00 weeks 00 00000000 17 11 year of manufacture 2010 years 14 00010100 18 12 edid structure version # = 1 01 00000001 19 13 edid revision # = 3 03 00000011 20 14 video input definition = digital signal 80 10000000 21 15 max h image size (rounded cm) = 35 cm 23 00100011 22 16 max v image size (rounded cm) = 19 cm 13 00010011 23 17 display gamma = (gamma*100)-100 = example:(2.2*100) -100=120 = 2.2 gamma 78 01111000 24 18 feature support (no_dpms, no_active off/very low po wer, rgb color display, timing blk 1,no_ gtf) 0a 00001010 25 19 red/green low bits (rxry/gxgy) 28 00101000 26 1a blue/white low bits (bxby/wxwy) 65 01100101 27 1b red x rx = 0.590 97 10010111 28 1c red y ry = 0.350 59 01011001 29 1d green x gx = 0.330 54 01010100 30 1e green y gy = 0.555 8e 10001110 31 1f blue x bx = 0.153 27 00100111 32 20 blue y by = 0.119 1e 00011110 33 21 white x wx = 0.313 50 01010000 34 22 white y wy = 0.329 54 01010100 35 23 established timing 1 (00h if not used) 00 00000000 36 24 established timing 2 (00h if not used) 00 00000000 37 25 manufacturer's timings (00h if not used) 00 00000000 38 26 standard timing id1 (01h if not used) 01 00000001 39 27 standard timing id1 (01h if not used) 01 00000001 40 28 standard timing id2 (01h if not used) 01 00000001 41 29 standard timing id2 (01h if not used) 01 00000001 42 2a standard timing id3 (01h if not used) 01 00000001 43 2b standard timing id3 (01h if not used) 01 00000001 44 2c standard timing id4 (01h if not used) 01 00000001 45 2d standard timing id4 (01h if not used) 01 00000001 46 2e standard timing id5 (01h if not used) 01 00000001 47 2f standard timing id5 (01h if not used) 01 00000001 48 30 standard timing id6 (01h if not used) 01 00000001 49 31 standard timing id6 (01h if not used) 01 00000001 50 32 standard timing id7 (01h if not used) 01 00000001 51 33 standard timing id7 (01h if not used) 01 00000001 52 34 standard timing id8 (01h if not used) 01 00000001 53 35 standard timing id8 (01h if not used) 01 00000001 established timings standard timing id header vendor / product edid version display parameters panel color coordinates www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 29 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 appendix a. enhanced extended display identificatio n data (eedid tm ) 2/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 54 36 pixel clock/10,000 (lsb) 72.3 mhz @ 60hz 3e 00111110 55 37 pixel clock/10,000 (msb) 1c 00011100 56 38 horizontal active (lower 8 bits) 1366 pixels 56 01010110 57 39 horizontal blanking(thp-ha) (low er 8 bits) 16 0 pixels a0 10100000 58 3a horizontal active / horizontal blanking(thp-ha) (up per 4:4bits) 50 01010000 59 3b vertical avtive 768 lines 00 00000000 60 3c vertical blanking (tvp-ha) (de blanking typ.for de only panels) 22 lines 16 00010110 61 3d vertical active : vertical blanking (tvp-ha) (up per 4:4bits) 30 00110000 62 3e horizontal sync. offset (thfp) 48 pixels 30 00110000 63 3f horizontal sync pulse width (hspw) 32 pixels 20 00100000 64 40 vertical sync offset(tvfp) : sync width (vspw) 3 lines : 5 lines 35 00110101 65 41 horizontal vertical sync offset/width (upp er 2bits) 00 00000000 66 42 horizontal image size (mm) 345 mm 59 01011001 67 43 vertical image size (mm) 194 mm c2 11000010 68 44 horizontal image size / vertical image size 10 00010000 69 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 70 46 vertical border = 0 (zero for notebook lcd) 00 00000000 71 47 non-interlace, normal display, no stereo, digital s eparate ( vsync_neg, hsync_neg ), de only note : ls b is set to '1' if panel is de-timing only. h/v can b e ignored. 19 00011001 72 48 flag 00 00000000 73 49 flag 00 00000000 74 4a flag 00 00000000 75 4b data type tag (descriptor defined by manufacturer ) 00 00000000 76 4c flag 00 00000000 77 4d descriptor defined by manufacturer 00 00000000 78 4e descriptor defined by manufacturer 00 00000000 79 4f descriptor defined by manufacturer 00 00000000 80 50 descriptor defined by manufacturer 00 00000000 81 51 descriptor defined by manufacturer 00 00000000 82 52 descriptor defined by manufacturer 00 00000000 83 53 descriptor defined by manufacturer 00 00000000 84 54 descriptor defined by manufacturer 00 00000000 85 55 descriptor defined by manufacturer 00 00000000 86 56 descriptor defined by manufacturer 00 00000000 87 57 descriptor defined by manufacturer 00 00000000 88 58 descriptor defined by manufacturer 00 00000000 89 59 descriptor defined by manufacturer 00 00000000 90 5a flag 00 00000000 91 5b flag 00 00000000 92 5c flag 00 00000000 93 5d data type tag ( ascii string ) fe 11111110 94 5e flag 00 00000000 95 5f ascii string l 4c 01001100 96 60 ascii string g 47 01000111 97 61 ascii string 20 00100000 98 62 ascii string d 44 01000100 99 63 ascii string i 69 01101001 100 64 ascii string s 73 01110011 101 65 ascii string p 70 01110000 102 66 ascii string l 6c 01101100 103 67 ascii string a 61 01100001 104 68 ascii string y 79 01111001 105 69 manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 0a 00001010 106 6a manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 107 6b manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 timing descriptor #1 timing descriptor #2 timing descriptor #3 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 30 / 30 lp156wh3 liquid crystal display ver. 1.0 jul. 01, 2010 appendix a. enhanced extended display identificatio n data (eedid tm ) 3/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 108 6c flag 00 00000000 109 6d flag 00 00000000 110 6e flag 00 00000000 111 6f data type tag ( ascii string ) fe 11111110 112 70 flag 00 00000000 113 71 ascii string l 4c 01001100 114 72 ascii string p 50 01010000 115 73 ascii string 1 31 00110001 116 74 ascii string 5 35 00110101 117 75 ascii string 6 36 00110110 118 76 ascii string w 57 01010111 119 77 ascii string h 48 01001000 120 78 ascii string 3 33 00110011 121 79 ascii string - 2d 00101101 122 7a ascii string t 54 01010100 123 7b ascii string l 4c 01001100 124 7c ascii string l 4c 01001100 125 7d ascii string 2 32 00110010 126 7e extension flag (# of optional 128 panel id extensio n block to follow, typ = 0) 00 00000000 127 7f check sum (the 1-byte sum of all 128 bytes in this panel id block shall = 0) b4 10110100 timing descriptor #4 checksum www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LP156WH3-TLL2

	To Download LP156WH3-TLL2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .