original creation date: 04/22/96 last update date: 07/30/96 last major revision date: 04/22/96 mn54f299-x rev 1a0 military data sheet octal universal shift/storage register with common parallel i/o pins general description the f299 is an 8-bit universal shift/storage register with tri-state outputs. four modes of operation are possible: hold (store), shift left, shift right and load data. the parallel load inputs and flip-flop outputs are multiplexed to reduce the total number of package pins. additional outputs, q0-q7, are provided to allow easy serial cascading. a separate active low master reset is used to reset the register. ns part numbers 54f299dm 54F299DMQB 54f299fmqb 54f299lmqb industry part number 54f299 prime die m299 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1
military data sheet mn54f299-x rev 1a0 features - common parallel i/o for reduced pin count - additional serial inputs and outputs for expansion - four operating modes: shift left, shift right, load and store - tri-state outputs for bus-oriented application 2
military data sheet mn54f299-x rev 1a0 (absolute maximum ratings) (note 1) storage temperature -65 c to +150 c ambient temperature under bias -55 c to +125 c junction temperature under bias -55 c to +175 c vcc pin potential to ground pin -0.5v to +7.0v input voltage (note 2) -0.5v to +7.0v input current (note 2) -30ma to +5.0ma voltage applied to output in high state (with vcc=0v) -0.5v to vcc standard output -0.5v to +5.5v tri-state output current applied to output in low state (max) twice the rated iol(ma) esd last passing voltage (min) 4000v note 1: absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. functional operation under these conditions is not implied. note 2: either voltage limit or current limit is sufficient to protect inputs. recommended operating conditions free air ambient temperature 0 c to +70 c commercial -55 c to +125 c military supply voltage +4.5v to +5.5v military +4.5v to +5.5v commercial 3
mn54f299-x rev 1a0 military data sheet electrical characteristics dc parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp range: -55c to 125c symbol parameter conditions notes pin- name min max unit sub- groups iih input high current vcc=5.5v, vm=2.7v, vinh=5.5v 1, 3 inputs 20 ua 1, 2, 3 ibvi input high current vcc=5.5v, vm=7.0v, vinh=5.5v 1, 3 inputs 100 ua 1, 2, 3 ibvit input high current vcc=5.5v, vm=5.5v, vinh=5.5v 1, 3 i/o inputs 1.0 ma 1, 2, 3 iil input low current vcc=5.5v, vm=0.5v, vinh=5.5v 1, 3 all other inputs -0.6 ma 1, 2, 3 iil2 input low current vcc=5.5v, vm=0.5v, vinh=5.5v 1, 3 sn inputs only -1.2 ma 1, 2, 3 vol output low voltage vcc=4.5v, vil=0.8v, iol=20ma, vinh=5.5v 1, 3 q0 & i/o outputs 0.5 v 1, 2, 3 voh output high voltage vcc=4.5v, vih=2.0v, ioh=-1.0ma, vinh=5.5v 1, 3 q0 & i/o outputs 2.5 v 1, 2, 3 voh3 output high voltage vcc=4.5v, vih=2.0v, ioh=-3.0ma, vinh=5.5v 1, 3 i/o outputs 2.4 v 1, 2, 3 ios short circuit current vcc=5.5v, vinh=5.5v, vm=0.0v 1, 3 q0 & i/o outputs -60 -150 ma 1, 2, 3 vcd input clamp diode voltage vcc=4.5v, im=-18ma, vinh=5.5v 1, 3 inputs- i/o outputs -1.2 v 1, 2, 3 icc supply current vcc=5.5v, vinl=0.0v, vinh=5.5v 1, 3 vcc 95 ma 1, 2, 3 icex output high leakage current vcc=5.5v, vinl=0.0v, vinh=5.5v, vm=5.5v 1, 3 outputs 250 ua 1, 2, 3 iozht output leakage current vcc=5.5v, vm=2.7v, vih=2.0v, vil=0.8v, vinl=0.0v, vinh=5.5v 1, 3 i/on 70 ua 1, 2, 3 iozlt output leakage current vcc=5.5v, vm=0.5v, vih=2.0v, vil=0.8v, vinl=0.0v, vinh=5.5v 1, 3 i/on -650 ua 1, 2, 3 ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs tplh(1) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 cp to i/on 3.5 9.0 ns 9 2, 4 cp to i/on 3.5 10.0 ns 10, 11 4
mn54f299-x rev 1a0 military data sheet electrical characteristics ac parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs symbol parameter conditions notes pin- name min max unit sub- groups tphl(1) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 cp to i/on 4.0 10.0 ns 9 2, 4 cp to i/on 4.0 11.0 ns 10, 11 tplh(2) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 cp to q0/q7 4.0 8.0 ns 9 2, 4 cp to q0/q7 4.0 9.0 ns 10, 11 tphl(2) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 cp to q0/q7 4.5 8.5 ns 9 2, 4 cp to q0/q7 5.5 9.5 ns 10, 11 tphl(3) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 mr to q0/q7 5.5 10.5 ns 9 2, 4 mr to q0/q7 5.5 12.5 ns 10, 11 tphl(4) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 mr to i/on 5.5 11.0 ns 9 2, 4 mr to i/on 5.5 12.0 ns 10, 11 tpzh output enable time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 oe to i/on 3.0 8.0 ns 9 2, 4 oe to i/on 3.0 9.5 ns 10, 11 tpzl output enable time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 oe to i/on 4.0 11.0 ns 9 2, 4 oe to i/on 4.0 13.0 ns 10, 11 tphz output disable time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 oe to i/on 1.5 6.0 ns 9 2, 4 oe to i/on 1.5 7.0 ns 10, 11 tplz output disable time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 4 oe to i/on 1.0 5.5 ns 9 2, 4 oe to i/on 1.0 6.5 ns 10, 11 ts(h) setup time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5 s0/s1 to cp 10.0 ns 9, 10, 11 ts(l) setup time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5 s0/s1 to cp 7.5 ns 9, 10, 11 5
mn54f299-x rev 1a0 military data sheet electrical characteristics ac parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs symbol parameter conditions notes pin- name min max unit sub- groups th(h/l) hold time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5 s0/s1 to cp 0.0 ns 9, 10, 11 ts(h/l) setup time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5 i/on , dsn to cp 4.0 ns 9, 10, 11 th(h/l)(2) hold time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5 i/on , dsn to cp 1.5 ns 9, 10, 11 tw(h/l) pulse width vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5cp pulse width 5.0 ns 9, 10, 11 tw(l) pulse width vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5mr pulse width 6.0 ns 9, 10, 11 trec recovery time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5 mr to cp 8.5 ns 9 5 mr to cp 12.0 ns 10, 11 fmax maximum input frequency vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 5 max input 100 mhz 9 5 max input 85 mhz 10, 11 note 1: screen tested 100% on each device at +25c, +125c & -55c temperature, subgroups a1, 2, 3, 7 & 8. note 2: screen tested 100% on each device at +25c temperature only, subgroup a9. note 3: sample tested (method 5005, table 1) on each mfg. lot at +25c, +125c & -55c temperature, subgroups a1, 2, 3, 7 & 8. note 4: sample tested (method 5005, table 1) on each mfg. lot at +25c subgroup a9, and periodically at +125c & -55c temperature, subgroups 10 & 11. note 5: guaranteed but not tested (design characterization data) 6
|
