catalog 1308028 issued 01-05 plug-in relays mini iso relays power relay vf4 please observe the disclaimer. 38 vf4_3d1 description features limiting continuous currents 60/40 a at the no / nc con- tacts dimensional characteristics and the functional allocations of the plug-in terminals to iso 7588 standardized dimensions plug-in or pcb terminals typical applications ignition lock lamp load (headlights) cooling fan abs exhaust emission control cross carline up to 60 a fuel pump engine cooling fan a/c blower a/c compressor clutch also available for 42 v applications please contact tyco electronics for relay application support. design dustproof; protection class ip 54 to iec 529 (en 60 529); with either mounting bracket or mounting clip options shrouded and weatherproof covers weight approx. 1.2 oz. (35 g) nominal voltage 6 v, 12 v or 24 v; other nominal voltages available on request terminals quick connect terminals similar to iso 8092-1 coil and load 6.3 x 0.8 mm; surfaces tin-plated or pcb terminals accessories connectors see page 188 special models on request integrated components: resistor, varistor, diode special labels special cover shapes conditions all parametric, environmental and endurance tests are performed according to eia standard rs-407-a at standard test conditions unless otherwise noted: 23 c ambient temperature, 20-50% rh, 29.5 1.0" hg (998.9 33.9 hpa). please also refer to the application recommendations in this catalog for general precautions. powertrain systems chassis systems safety security body driver information convenience car industry truck industry other industry disclaimer all technical performance data apply to the relay as such, specific conditions of the individual application are not considered. please always check the suitability of the relay for your intended purpose. we do not assume any responsibility or liability for not complying herewith. we recommend to complete our questionnaire and to request our technical service. any responsibility for the application of the product remains with the customer only. all speci fications are subject to change without notification. all rights of tyco are reserved.
plug-in relays mini iso relays power relay vf4 please observe the disclaimer. 39 catalog 1308028 issued 01-05 .209 (5.3) 1.10 max. (28.0) .59 (15.0) .236 (6.0) .638 (16.2) 1.004 max. (25.5) .453 max. (11.5) .250 (6.3) .197 (5.0) 1.10 max. (28.0) .250 (6.3) .661 (16.8) .122 (3.1) .315 (8.0) .331 (8.4) .705 (17.9) 86 87a 30 85 87 ecr1344-i terminal thickness .032 + .001 (0.81 + 0.03) north america production dimensional drawing dust cover with quick connect terminals vf4-1**** (without bracket) and vf4-4**** (with bracket) european production dimensional drawing version with quick connect terminals .732 (18.6) .355 (9.0) .886 (22.5) 1.54 max. (0.39) .252 (6.4) .453 max. (11.5) .167 (4.25) .250 typ. (6.3) .984 max. (25.0) .482 (12.25) .16 max. (4.1) 1.26 max. (32.0) .157 (4.0) .285 (7.25) 1.26 max. (32.0) .705 (17.9) .315 (8.0) .661 (16.8) .177 (4.5) .331 (8.4) 87a 86 87 85 30 ecr1347-8 shrouded dust cover with quick connect terminals vf4-2**** (without bracket) and vf4-5**** (with bracket) view of the terminals (bottom view) view of the terminals (bottom view) view of the terminals (bottom view)
plug-in relays mini iso relays power relay vf4 please observe the disclaimer. 40 catalog 1308028 issued 01-05 .728 .010 (18.5 0.25) .453 max. (11.5) .26 (6.6) .354 (9.0) .250 (6.3) 1.42 max. (36.1) 87 86 30 85 87a ecr1348-9 .653 .066 (16.6 0.15) 1.77 .019 (45.0 0.5) .775 .006 (19.7 0.15) .295 .018 (7.5 0.45) .276 ref. (7.0) .453 .006 (11.50 0.15) .165 .006 (4.20 0.15) .331 (8.4) .472 .015 (12.0 0.38) .66 (16.8) .705 (17.9) .354 (8.0) 1.42 max. (36.1) north america production weatherproof cover with quick connect terminals vf4-3**** (without bracket) and vf4-6**** (with bracket) view of the terminals (bottom view) view of the terminals (bottom view) .666 .012 (16.9 0.3) .157 .012 (4.5 0.3) .315 .010 (8.4 0.25) .705 .010 (17.9 0.25) .315 .010 (8.0 0.25) .106 .020 (2.7 0.5) ecr1655-h mounting hole layout european production version with pcb terminals
plug-in relays mini iso relays power relay vf4 please observe the disclaimer. 41 catalog 1308028 issued 01-05 load limit curve pin assignment load limit curve 1 ^ = arc extinguishes during transit time (changeover contact) load limit curve 2 ^ = safe shutdown, no stationary arc (make contact) 1 make contact/ 1 form a 1 changeover contact/ 1 form c models with resistor or diode in parallel to the coil on request. models with resistor or diode in parallel to the coil on request. contact data contact configuration circuit symbol (see also pin assignment) limiting continuous current at 23 c at 85 c contact material max. switching voltage/power max. switching current 1) on 2) off min. recommended load 3) voltage drop (initial) no contact at 40 a nc contact at 30 a mechanical endurance (without load) electrical endurance (example of resistive load) max switching rate at nominal load 1) the values apply to a resistive or inductive load with suitable spark suppression and at maximum 13.5 v for 12 v load voltages. 2) for a load current duration of maximum 3 s for a make/break ratio of 1:10. 3) see chapter diagnostics in our application recommendations on page 18. make contact/ changeover contact/ form a form c 60 a 40/60 a 40 a 40/60 a agni0.15 see load limit curve nc/no 120 a 45/120 a 60 a 40/60 a 1 a at 5 v typ. 60 mv, 200 mv max. typ. 60 mv, 200 mv max. typ. 60 mv, 250 mv max. > 10 7 operations > 1 x 10 5 operations > 1 x 10 5 operations 40 a, 14 v 40 a, 14 v (no contact) 6 operations per minute (0.1 hz)
catalog 1308028 issued 01-05 plug-in relays mini iso relays power relay vf4 please observe the disclaimer. 42 coil data available for nominal voltages 6, 12, 24 v nominal power consumption of the unsuppressed coil at nominal voltage 1.6 w nominal power consumption at nominal voltage with suppression resistor 1.8 w test voltage winding/contact 500 vac rms ambient temperature range 40 to + 125 c operate time at nominal voltage typ. 7 ms release time at nominal voltage 1) typ. 2 ms 1) for unsuppressed relay coil n.b. a low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. mechanical data cover retention axial force 150 n (33.8 lbs) pull force 200 n (45 lbs) push force 200 n (45 lbs) terminals pull force 100 n (22.5 lbs) push force 100 n (22.5 lbs) resistance to bending, force applied to front 10 n (2.25 lbs) 1) resistance to bending, force applied to side 10 n (2.25 lbs) 1) torsion 0.3 nm enclosures dust cover protects relay from dust. for use in passenger compartment or enclosures shrouded dust cover protects relay and relay connector (order separately) from dust and splash weatherproof cover mates with a connector (order separately) to seal relay from salt spray etc. recommended for under hood application 1) values apply 2 mm from the end of the terminal. when the force is removed, the terminal must not have moved by more than 0.3 mm. operating voltage range does not take into account the temperature rise due to the contact current e = pre-energization ambient temperature vs. coil voltage for continuous duty 100 90 80 70 60 50 40 90 95 100 105 110 115 120 125 130 135 140 145 150 applied coil voltage (% of nominal voltage) maximum allowable ambient temperature ( c) 30 110 120 130 0 a contact load 8 a contact load 16 a contact load 24 a contact load 32 a contact load 40 a contact load 134_atcv battery voltage assumptions: 1. still air 2. nominal coil resistance 3. maximum mean coil temperature = 180 c 4. coil temperature rise due to load = 1 c at 8 a = 5 c at 16 a = 11 c at 24 a = 20 c at 32 a = 32 c at 40 a 5. thermal resistance and power dissipation based on coil resistance at 180 c 6. curves are based on 1.6 w at 23 c 7. when full lifetime is at high ambient and high load current, subtract 25 c from maximum allowable ambient temperature.
catalog 1308028 issued 01-05 plug-in relays mini iso relays power relay vf4 please observe the disclaimer. 43 operating conditions temperature range, storage test vibration resistance shock resistance jump start drop test flammability overload current 1) 1) current and time are compatible with circuit protection by a typical 40 a automotive fuse. relay will make, carry and break the s pecified current. -40 c to 155 c relevant standard testing as per dimension comments 1.27 mm double amplitude 10-40 hz valid for nc contacts. 5 g constant 40-70 hz no contacts are significantly 0.5 mm double amplitude 70-100 hz higher 5 g constant 100-500 hz half sine wave pulse 20 g no change in the 11 ms switching state > 1 ms 24 v for 5 minutes conducting nominal current at 23 c capable of meeting specifications after 1.0 m (3.28 foot) drop onto concrete ul94-hb or better (meets fmvss 302) 54 a, 1800 s 80 a, 40 s 140 a, 5 s 240 a, 1 s ordering information (production in usa unless otherwise denoted) part numbers for vf4 1) (see table below for coil data) contact contact enclosure special relay part number tyco order number arrangement material features 6 v plug-in relays vf4-45d11* 7-1393305-2 1 form c agni0.15 dust cover bracket 12 v plug-in relays vf4-11f11 0- 1393305-2 1 form a agni0.15 dust cover vf4-11f11-s01 1-1393305-7 1 form a agni0.15 dust cover resistor vf4-15f11 6-1393298-0 1 form c agni0.15 dust cover vf4-15f11-c01 6-1393298-1 1 form c agni0.15 sealed vf4-15f11-c05 6-1393298-2 1 form c agni0.15 sealed resistor vf4-15f11-s01 6-1393298-4 1 form c agni0.15 dust cover resistor vf4-15f21-s01 7-1393298-3 1 form c agsno2 dust cover resistor vf4-41f11 6-1393305-5 1 form a agni0.15 dust cover bracket vf4-41f11-s01* 6-1393305-9 1 form a agni0.15 dust cover bracket, resistor vf4-45f11 8-1393298-8 1 form c agni0.15 dust cover bracket vf4-45f11-c01 7-1393305-4 1 form c agni0.15 sealed bracket vf4-45f11-c05* 7-1393305-5 1 form c agni0.15 sealed bracket, resistor vf4-45f21-s01 0- 1432636-1 1 form c agsno2 dust cover bracket, resistor vf4-55f11 8-1393305-6 1 form c agni0.15 shrouded cover vf4-55f11-s01 8-1393305-7 1 form c agni0.15 shrouded cover resistor vf4-61f11 9-1393305-0 1 form a agni0.15 weatherproof cover vf4-61f11-s01 9-1393305-1 1 form a agni0.15 weatherproof cover resistor vf4-65f11 9-1393305-3 1 form c agni0.15 weatherproof cover vf4-65f11-s01 9-1393305-5 1 form c agni0.15 weatherproof cover resistor 24 v plug-in relays vf4-15h11 0- 1393302-7 1 form c agni0.15 dust cover vf4-15h11-c05* 5-1393305-3 1 form c agni0.15 sealed resistor vf4-15h11-s08 5-1393305-7 1 form c agni0.15 dust cover resistor vf4-41h11* 7-1393305-0 1 form a agni0.15 dust cover bracket vf4-41h11-s08* 7-1393305-1 1 form a agni0.15 dust cover bracket, resistor vf4-45h11 1-1393302-1 1 form c agni0.15 dust cover bracket vf4-45h11-c05* 0- 1432219-1 1 form c agni0.15 sealed bracket, resistor vf4-65h11 9-1393305-7 1 form c agni0.15 weatherproof cover vf4-65h11-s08 9-1393305-9 1 form c agni0.15 weatherproof cover resistor * denotes europe production.
catalog 1308028 issued 01-05 plug-in relays mini iso relays power relay vf4 44 please observe the disclaimer. coil versions coil must must coil data rated coil resistance operate release allowable overdrive 1) for vf4 voltage +/- 10% voltage voltage voltage (v) (v) ( ? ) (v) (v) at 23 ? at 85 ? vf4-**d**-** 6 22.5 3.6 0.6 10.1 7.9 vf4-**f**-** 12 90 7.2 1.2 20.2 15.7 vf4-**h**-** 24 360 14.4 2.4 40.5 31.5 1) allowable overdrive is stated with no load applied and minimum coil resistance. standard delivery packs (orders in multiples of delivery pack) vf4-1: 300 pieces vf4-2: 165 pieces vf4-3: 165 pieces vf4-4: 300 pieces vf4-5: 110 pieces vf4-6: 110 pieces ordering information (production in usa unless otherwise denoted) continued part numbers for vf4 1) (see table below for coil data) contact contact enclosure special relay part number tyco order number arrangement material features 12 v pcb relays vf4-11f13* 2-1393305-1 1 form a agni0.15 dust cover vf4-11f13-c01* 2-1393305-2 1 form a agni0.15 sealed vf4-15f13* 0-1393302-6 1 form c agni0.15 dust cover vf4-15f13-c01* 4-1393305-5 1 form c agni0.15 sealed vf4-15f13-c05* 4-1393305-7 1 form c agni0.15 sealed resistor 24 v pcb relays vf4-11h13* 2-1393305-6 1 form a agni0.15 dust cover vf4-15h13* 0-1393302-8 1 form c agni0.15 dust cover vf4-15h13-c01* 5-1393305-9 1 form c agni0.15 sealed 1) optional coil suppression: add suffix -s07 for 180 ? resistor (for 6 vdc), -s01 for 680 ? resistor (for 12 vdc), -s08 for 2,700 ? resistor (for 24 vdc) epoxy sealed construction: add suffix -c01 for epoxy sealed unit. epoxy sealed construction with parallel resistor: add suffix -c05 for epoxy sealed unit. * denotes europe production.
|
