standard application for stby* pin open = output enabled ground = output disabled. pin-out information pin function 1 ovp drive 2 pwr good 3 vid0 4 vid1 5 vid2 6 vid3 7 vid4 8 stby* 9 do not connect 10 v in 11 v in 12 v in pin function 13 remote sense gnd 14 gnd 15 gnd 16 gnd 17 gnd 18 gnd 19 v out 20 v out 21 v out 22 v out 23 remote sense v out pt6700 the pt6700 is a new series of high-performance, 13 amp integrated switching regulators (isrs) housed in a unique, space-saving 23 -pin sip package. the 13a capability allows easy integration of the latest high- speed, low-voltage ps and bus drivers into existing 5v systems. the output voltage of the pt6700 can be programmed easily from 1.3v to 3.5v with a 5-bit input compatible with intels pentium ? ii processor. the pt6700 includes a differential remote sense which automatically com- pensates for any voltage drop from the isr to the load. also provided are internal short circuit protection, ovp drive and a power good output signal. when over-voltage is de- tected, the pt6700 provides drive for an external crowbar or other protec- tion circuitry. for assistance or to order, call (800) 531-5782 c in = required 1000f electrolytic c out = required 330f electrolytic l1 = optional 1h input choke r1 = required 10k ? pull-up when using pwr good signal. pwr good output is high when the output voltage is within specification. specifications characteristics pt6700 series (t a = 25c unless noted) symbols conditions min typ max units output current i o t a = +60c, 200 lfm, pkg n 0.1 * 13a t a = +25c, natural convection 0.1 * 13a input voltage range v in 0.1a i o 13a 4.5 5.5 v output voltage tolerance ? v o v in = +5v, i o = 13a v o -0.03 v o +0.03 v -40c t a +65c line regulation reg line 4.5v v in 5.5v, i o = 13a 10 mv load regulation reg load v in = +5v, 0.1 i o 13a 20 mv v o ripple/noise v n v in = +5v, i o = 13a 50 mv transient response t tr i o step between 6a and 12a 70 sec with c out = 330f v os v o over/undershoot 100 mv efficiency v in = +5v, i o = 8a v o = 3.3v 91 % v o = 2.9v 90 % v o = 2.5v 89 % v o = 1.8v 85 % v o = 1.5v 83 % switching frequency ? o 4.5v v in 5.5v 300 350 400 khz 0.1a i o 12.5a absolute maximum t a -40 +85 c operating temperature range recommended operating t a forced air flow = 200 lfm -40 +65 c temperature range over v in and i o ranges storage temperature t s -40 +125 c mechanical shock per mil-std-883d, method 2002.3 1 msec, half sine, mounted to a fixture tbd gs mechanical vibration per mil-std-883d, method 2007.2, tbd gs 20-2000 hz, soldered in a pc board weight 26 grams * isr-will operate down to no load with reduced specifications. output capacitors: the pt6700 series requires a minimum ouput capacitance of 330f. the maximum allowable output capacitance is 15,000f. input filter: an input filter is optional for most applications. the input inductor must be sized to handle 12.5adc with a typical value of 1h. the input capacitance must be rated for a minimum of 1.6arms of ripple current. for transient or dynamic load applications, additional capacitance may be required. revised 9/13/99 power trends, inc. 27715 diehl road, warrenville, il 60555 (800) 531-5782 fax: (630) 393-6902 http://www.powertrends.com pt6700 10 - 12 14 - 18 19 - 22 2 v in gnd 1h gnd v out c out + c in + 13 23 3 l1 pwr good load remote sense (+) remote sense (-) vid1 vid2 vid3 vid4 programming pins 4 5 6 stby* 8 7 vid0 ovp drv 1 r1 13 amp programmable integrated switching regulator series patent pending on package assembly new space-saving package
programming information vid4=1 vid4=0 vid3 vid2 vid1 vid0 vout vout 1 1 1 1 2.0v 1.30v 1 1 1 0 2.1v 1.35v 1 1 0 1 2.2v 1.40v 1 1 0 0 2.3v 1.45v 1 0 1 1 2.4v 1.50v 1 0 1 0 2.5v 1.55v 1 0 0 1 2.6v 1.60v 1 0 0 0 2.7v 1.65v 0 1 1 1 2.8v 1.70v 0 1 1 0 2.9v 1.75v 0 1 0 1 3.0v 1.80v 0 1 0 0 3.1v 1.85v 0 0 1 1 3.2v 1.90v 0 0 1 0 3.3v 1.95v 0 0 0 1 3.4v 2.00v 0 0 0 0 3.5v 2.05v ? space saving sip package ? +5v input ? 5-bit programmable: 1.3v to 3.5v@13a ? high efficiency ? input voltage range: 4.5v to 5.5v ? differential remote sense ? short circuit protection ? over-voltage drive ? power good signal features for assistance or to order, call (800) 531-5782 power trends, inc. 27715 diehl road, warrenville, il 60555 (800) 531-5782 fax: (630) 393-6902 http:/www.powertrends.com pt6701, vin = 5.0v (typical performance at t a = 25c) efficiency vs output current ripple vs output current power dissipation vs output current efficiency (%) ripple (mv) pd (watts) iout (a) iout (a) iout (a) series ordering information pt6701 ? ? ? ? ? = 1.3 to 3.5 volts (for dimensions and pc board layout, see package styles 1300 and 1310.) pt series suffix (pt1234 x ) case/pin configuration vertical through-hole n horizontal through-hole a horizontal surface mount c logic 0 = pin 13 potential (remote sense gnd) logic 1 = open circuit (no pull-up resistors) vid3 and vid4 may not be changed while the unit is operating. pt6700 characteristic data 40 50 60 70 80 90 100 024681012 3.3v 2.5v 1.8v 0 5 10 15 20 25 30 024681012 3.3v 2.5v 1.8v 0 1 2 3 4 5 6 024681012 3.3v 2.5v 1.8v vout vout vout 20 30 40 50 60 70 80 90 024681012 200lfm 120lfm 60lfm nat conv ambient temperature (c) safe operating area, vout = 3.3v iout-(a) pt6701, vin = 5.0v airflow pt6700 product family input vout ovp/ requires voltage adjust pwr good +12v bias pt6701 5v vid pt6702 3.3v vid pt6705 5v resistor pt6715 5v resistor pt6721 12v vid pt6725 12v resistor
important notice texas instruments and its subsidiaries (ti) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. all products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. ti warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with ti's standard warranty. testing and other quality control techniques are utilized to the extent ti deems necessary to support this warranty. specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (acritical applicationso). ti semiconductor products are not designed, authorized, or warranted to be suitable for use in life-support devices or systems or other critical applications. inclusion of ti products in such applications is understood to be fully at the customer's risk. in order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. ti assumes no liability for applications assistance or customer product design. ti does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of ti covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. ti's publication of information regarding any third party's products or services does not constitute ti's approval, warranty or endorsement thereof. copyright ? 1999, texas instruments incorporated
|
