3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? surface mount header .100 .100 high temperature n4600 series physical electrical environmental insulator material: glass filled polyester (pct) flammability: ul 94v-0 color: beige or black (rb plating suffix) contact material: copper alloy plating underplating: 100 ? [ 2.54 m ] nickel wiping area: 30 ? [ 0.76 m ] gold solder tails: 200 ? [ 5.08 m ] 60/40 tin lead or 300 " [ 7.62 m ] matte tin (see ording information) marking: 3m logo, part identification number and orientation triangle current rating: 1 a insulation resistance: >1 10 9 ? at 500 v dc withstanding voltage: 1000 v rms at sea level temperature rating: -55 c to +105 c processing: maximum 260 c (per j-std-020c) moisture sensitivity level: 1 (per j-std-020c) ts-0168-b sheet 1 of 3 ? compliant gull wing leads make a reliable surface mount connection which is easily inspectable ? optional ejector latches ? shrouded to prevent physical and chemical pin damage ? high temperature plastic for vapor phase reflow process ? slotted mounting flanges for securing header to board ? raised body for easy inspection and repair ? leads are protected within the body shadow ? see regulatory inform ation appendix (ria) for chemical compliance information date modified: november 2, 2007 ul file no.: e68080
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? surface mount header .100 .100 high temperature n4600 series ts-0168-b sheet 2 of 3 notes: 1. notches a and c will accommodate 3m? polarization key n3518. 2. accepts a #4, #2, or 3 mm panhead machine screw and nut. 3. mounting ears provide mechanical protection to solder joints and are recommended. for applications where there is not room for mounting ears, ejector/la tches should be used. -20xx header with no ejector/latch -22xx header with short ejector/latch for 3m sockets without strain relief -23xx header with long ejector/latch for 3m sockets with strain relief .41 [10.4] .56 [14.2] .22 ref [5.6] .37 ref [9.4] c position 1 d a .25 [6.4] b .165 [4.19] .33 [8.4] .155 .010 [3.94] 2x r .06 [1.5] (see note 2) .100 ref [2.54] .100 typ ref [2.54] .25 ref [6.4] position 1 orientation triangle notch a (see table 1 & note 1) notch b (see table 1) notch c (see table 1 & note 1) .17 [4.3] a a optional ejector latch .525 [13.34] .235 [5.97] .243 ref [6.17] .100 ref [2.54] .025 sq typ [0.64] .150 [3.81] section a-a .0 .00 .000 inch .1 .01 .005 [ ] d im ensions for r eference onl y tolerance unless noted [m m ] inch
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? surface mount header .100 .100 high temperature n4600 series table 1 pin quantity part number dimensions polarization notches a b c d 10 n4610 1.50 [38.2] 1.20 [30.5] 0.90 [22.9] 0.71 [18.0] b 14 n4614 1.70 [43.2] 1.40 [35.6] 1.10 [28.0] 0.91 [23.1] b c 16 n4616 1.80 [45.8] 1.50 [38.2] 1.20 [30.5] 1.01 [25.6] a b c 20 n4620 2.00 [50.9] 1.70 [43.2] 1.40 [35.6] 1.21 [30.7] a b c 26 n4626 2.30 [58.5] 2.00 [50.9] 1.70 [43.2] 1.51 [38.3] a b c 34 n4634 2.70 [68.6] 2.40 [61.0] 2.10 [53.4] 1.91 [48.5] a b c 40 n4640 3.00 [76.3] 2.70 [68.6] 2.40 [61.0] 2.21 [56.1] a b c 50 n4650 3.50 [89.0] 3.20 [81.3] 2.90 [73.7] 2.71 [68.8] a b c 60 n4660 4.00 [101.7] 3.70 [94.0] 3.40 [86.4] 3.21 [81.5] a b c table 2 3m part number latch descr. latch/ejector dimensions f g n3505-22 short 0.335 [ 8.51] 0.726 [18.44] n3505-23 long 0.484 [12.29] 0.875 [22.23] ejector latch (may be ordered separately for use with n46xx-20xx-xx version) n3505-22 (short, beige) n3505-22b (short, black) n3505-23 (long, beige) n3505-23b (long, black) ts-0168-b sheet 3 of 3 ordering information (order separately) polarizing key n3518 (black only) x46xx-2xxx-xx pin qty (see table 1) body style: 0 = with mounting ears 1 = without mounting ears .115 [ 2.92 ] .043 [ 1.09 ] .162 [4.11] g .177 [4.50] .200 [5.08] latch/ejector material: glass filledpolyester (pct) f .15 [3.8] .02 [0.5] .09 [2.3] .195 [4.95] 3518 breakaway tab .34 ref [8.6] polarizing key 3m part no. n3518 material: black lcp .100 typ [2.54] .080 typ [2.03] .098 [2.48] 2x ? .116 [2.95] (see note 1) .375 [9.53] .050 [1.27] recommended printed circuit board pattern plating suffix: blank = tin-lead solder tails (ria e3 & c2 apply) rb = matte tin solder tails (ria e1 & c1 apply) polarization: 0 = for pin qty 14 to 60 5 = for pin qty 10 n = high temp. beige (pct) blank pltg. suffix n = high temp. black (pct) rb pltg. req'd. latch option: 0 - no ejector latch 2 - short ejector latch 3 - long ejector latch
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/717/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below.product warranty stated below. ria-2217a-c
appendix e5: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under item 6 of the annex to the directive. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. ria-2217a-c
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2007. all rights reserved. ria-2217a-c 3 3m electronics interconnect products 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3m.com/interconnects 3m is a trademark of 3m company. appendix c3: china rohs electronic industry standard of the peoples republic of china s/t1133200 reuirements for concentration limits for certain haardous substances in electronic information products this symbol per maring for the control of pollution caused by electronic information products s/t1134200 means that the product or part does contain a substance as detailed in the chart belo in excess of the folloing maximum concentration values in any homogeneous material: a 01 by eight for lead mercury hexavalent chromium polybrominated biphenyls or polybrominated diphenyl ethers or b 001 by eight for cadmium unless otherise stated by 3m in riting this information represents 3ms best noledge and belief based upon information provided by third party suppliers to 3m the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product arranty the product arranty is stated belo in the event any product is proven not to conform ith 3ms regulatory information appendix then 3ms entire liability and buyers exclusive remedy ill be in accordance ith the product arranty stated belo
|
