tv5 tcvcxo series surface mount temp. compensated voltage controlled xtal oscillator with or without trimmer clipped sine wave compatible standard specifications overall frequency 1.5 to 15 ppm over operating temperature range available operating temperature range 0 to +50 c to -40 to +85 c available supply voltage (vcc) 5.0 volts and 3.3 volts available output load (see test circuit 7) part numbering guide tcvcxo package frequency in mhz 3tv5 1 c 100 a s - 10.0m - xxx (internal code or blank) (425) 776 - 1880, fax: (425) 776 - 2760, ple - sales@pletronics.com, www.pletronics.com 29 jan 2004 pl tronics, inc. mechanical: not to scale inches (mm) 1=11.4x9.6x2mm, w/o trimmer 8=11.4x9.6x2mm, with trimmer 9=9x7x2mm, w/o trimmer model / supply voltage tv5= 5.0 volts 5% 3tv5= 3.3 volts 5% stability vs. temp vs. vcc aging 0.5 ppm maximum over vcc 5% 3 ppm first year, 1 ppm per year thereafter at 25 c 5% frequency adj by trimmer 3 ppm minimum 1 volt p-p minimum output voltage levels supply current (icc) 2 to 5 ma max 10 k / 10 pf logic c: clipped sine wave control voltage range (cvr) 0.5 to 4.5 volts for 5.0 volt supply; 0.0 to 3.3 volts for 3.3 volt supply pullablity over cvr 5, 10, 15 ppm. consult factory for 25 ppm. linearity 10% (consult factory for 5%) frequency stability (fs) frequency deviation (pullability) over cvr s: 5 ppm r: 10 ppm q: 15 ppm t: 25 ppm operating temperature range {tightest fs available} a: 0 to +50 c { 1.5 ppm } b: 0 to +70 c { 1.5 ppm } c: -10 to +70 c { 2.0 ppm } d: -20 to +75 c { 2.0 ppm } e: -30 to +75 c { 2 .5 ppm } f: -40 to +85 c { 5.0 ppm } 015: 1.5 ppm 020: 2.0 ppm 025: 2.5 ppm 030: 3.0 ppm 150: 15.0 ppm 050: 5.0 ppm 100: 10.0 ppm consult factory for available frequencies and specs. not all options available for all frequencies. a special p/n may be assigned. package 1 & 8 package 9 .449 (11.4) .378 (9.6) .079 (2.0) .300 (7.62) .354 (9.0) 1 1 2 3 4 2 3 4 .07 (1.8) .13 (3.3) .17 (4.3) .04 (1.0) .260 (6.6) vcon gnd out vcc .270 (6.86) .06 (1.6) solder pads .276 (7.0) vcon gnd out vcc .200 (5.08) .079 (2.0) .06 (1.6) solder pads trimmer on package 8 only, location may vary due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. frequency stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load packaging bulk or 16mm tape 12mm pitch packaging bulk or 24mm tape 12mm pitch pl tronics , inc. 19013 36th ave. w, suite h lynnwood, wa 98036 usa manufacturer of high quality frequency control products . portions of the part number that appear after the frequency may not be marked on part (c of c provided) 10.00 mhz ? 60.00 mhz 1 2 3 4 1 2 3 4 for best performance, do not allow any traces other than ground under oscillators (even in buried layers)
|
