View HD74LVC1G66CLE_6756759.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation ( http://www.renesas.com ) send any inquiries to http://www.renesas.com/inquiry .
notice 1. all information included in this document is current as of th e date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology de scribed in this document for any purpose re lating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or om issions from the information included herein. 7. renesas electronics products are classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product depends on the product?s quality grade, as indicated below. you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application categorized as ?specific? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intended where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electronics data sheets or data books, etc. ?standard?: computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. ?high quality?: transportation equipment (automobiles, trains, ship s, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specifically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use re nesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of c ontrolled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any fo rm, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
rev.3.00 jul. 01, 2004 page 1 of 10 hd74lvc1g66 single analog switch rej03d0026?0300z rev.3.00 jul. 01, 2004 description the hd74lvc1g66 has an analog switch in a 5-pin packag e. switch section has its enable input control (cont). high-level voltage applied to cont turns on the switch section. applications include signal gating chopping, modulation or demodulation (modem), and sign al multiplexing for analog to digital to analog conversion systems. low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. features ? the basic gate function is lined up as renesas uni logic series. ? supply voltage range: 1.65 to 5.5 v operating temperature range: ?40 to +85c ? control input: v ih (max.) = 5.5 v (@v cc = 0 v to 5.5 v) ? ordering information part name package type package code package abbreviation taping abbreviation (quantity) hd74lvc1g66cpe tbs-5v cp HD74LVC1G66CLE wcsp-5 pin tbs-5av cl e (3,000 pcs/reel) article indication e 9 y m marking year code month code function table control switch lo f f ho n h: high level l: low level = 0 v to 5.5 v) package type package code package abbreviation tbs-5v cp tbs-5av cl
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 2 of 10 pin arrangement (bottom view) (top view) cont 15 2 34 gnd height 0.5 mm 0.5 mm pitch 0.17 mm 5?ball (cp) 0.23 mm 5?ball (cl) 0.9 mm 1.4 mm out/in in/out v cc pin#1 index logic diagram in/out out/in c o nt 1 4 2 absolute maximum ratings item symbol ratings unit test conditions supply voltage range v cc ?0.5 to 6.5 v input voltage range *1 v i ?0.5 to 6.5 v output voltage range *1, 2 v o ?0.5 to v cc +0.5 v output : h or l control input clamp current i ik ?50 ma v i < 0 output clamp current i ok 50 ma v o < 0 or v o > v cc continuous output current i o 50 ma v o = 0 to v cc continuous current through v cc or gnd i cc or i gnd 100 ma 154 cp package thermal impedance ja 132 c/w cl storage temperature tstg ?65 to 150 c notes: the absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. the input and output voltage ratings may be exceeded if the input and output cl amp-current ratings are observed. 2. this value is limited to 5.5 v maximum. (top view) out/in 2 absolute maximum ratings symbol ratings v cc ?0.5 to 6.5 v i ?0.5 to 6.5 v o ?0.5 to v control input clamp current i ik
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 3 of 10 recommended operating conditions item symbol min max unit conditions supply voltage range v cc 1.65 5.5 v control input voltage range v i 05 . 5v input/output voltage range v i/o 0v cc v 02 0 v cc = 1.65 to 1.95 v, 2.3 to 2.7 v 01 0 v cc = 3.0 to 3.6 v input transition rise or fall rate ? t / ? v 01 0 ns / v v cc = 4.5 to 5.5 v operating free-air temperature t a ?40 85 c note: unused or floating inputs must be held high or low. electrical characteristics ta = ?40 to 85c item symbol v cc (v) min typ max unit test condition 1.65 to 1.95 v cc 0.65 ? ? 2.3 to 2.7 v cc 0.7 ? ? 3.0 to 3.6 v cc 0.7 ? ? v ih 4.5 to 5.5 v cc 0.7 ? ? 1.65 to 1.95 ? ? v cc 0.35 2.3 to 2.7 ? ? v cc 0.3 3.0 to 3.6 ? ? v cc 0.3 input voltage v il 4.5 to 5.5 ? ? v cc 0.3 v 1.65 ? 13 30 i s = 4 ma 2.3 ? 9 20 i s = 8 ma 3.0 ? 7.5 15 i s = 24 ma on?state switch resistance r on 4.5 ? 5.5 10 i s = 32 ma v i =v cc or gnd 1.65 ? 74.5 120 i s = 4 ma 2.3 ? 20 30 i s = 8 ma 3.0 ? 11.5 20 i s = 24 ma peak on resistance r on (p) 4.5 ? 7.5 15 ? i s = 32 ma v i =v cc to gnd ? ? 1.0 off-state switch leakage current i s (off) 5.5 ? ? 0.1* 1 av i = v cc and v o = gnd or v i = gnd and v o = v cc , v c = v il ? ? 1.0 on-state switch leakage current i s (on) 5.5 ? ? 0.1* 1 av i = v cc or gnd, v c = v ih v o = open ? ? 1.0 control input current i in 5.5 ? ? 0.1* 1 av in = v cc or gnd ? ? 10 i cc 5.5 ? ? 1.0* 1 av in = v cc or gnd quiescent supply current ? i cc 5.5 ? ? 500 av c = v cc ?0.6 v control input capacitance c ic 5.0 ? 3.0 ? pf c i/o(off) 5.0 ? 6.0 ? switch terminal capacitance c i/o(on) 5.0 ? 13 ? pf note: 1. ta = 25c (v) min typ max unit test condition 0.7 ? ? 0.7 ? ? 0.7 ? ? 1.65 to 1.95 ? ? v cc
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 4 of 10 switching characteristics v cc = 1.8 0.15 v ta = ?40 to 85c item symbol min max unit test conditions from (input) to (output) propagation delay time* 1 t plh t phl ? 2.0 c l = 30 pf, r l = 1.0 k ? inout or outin outin or inout enable time t zh t zl 2.5 12.0 c l = 30 pf, r l = 1.0 k ? cont inout or outin disable time t hz t lz 2.2 10.0 ns c l = 30 pf, r l = 1.0 k ? cont inout or outin v cc = 2.5 0.2 v ta = ?40 to 85c item symbol min max unit test conditions from (input) to (output) propagation delay time* 1 t plh t phl ? 1.2 c l = 30 pf, r l = 500 ? inout or outin outin or inout enable time t zh t zl 1.9 6.5 c l = 30 pf, r l = 500 ? cont inout or outin disable time t hz t lz 1.4 6.9 ns c l = 30 pf, r l = 500 ? cont inout or outin v cc = 3.3 0.3 v ta = ?40 to 85c item symbol min max unit test conditions from (input) to (output) propagation delay time* 1 t plh t phl ? 0.8 c l = 50 pf, r l = 500 ? inout or outin outin or inout enable time t zh t zl 1.8 5.0 c l = 50 pf, r l = 500 ? cont inout or outin disable time t hz t lz 2.0 6.5 ns c l = 50 pf, r l = 500 ? cont inout or outin v cc = 5.0 0.5 v ta = ?40 to 85c item symbol min max unit test conditions from (input) to (output) propagation delay time* 1 t plh t phl ? 0.6 c l = 50 pf, r l = 500 ? inout or outin outin or inout enable time t zh t zl 1.5 4.2 c l = 50 pf, r l = 500 ? cont inout or outin disable time t hz t lz 1.4 5.0 ns c l = 50 pf, r l = 500 ? cont inout or outin note: 1. the propagation delay is calculated rc time constant of typical on-state resist ance of the switch and the specified load capacitance, when driven by an i deal voltage source (zero output impedance). = 30 pf, r l = 500 unit test conditions 0.8 c l = 50 pf, r l = 500 c l = 50 pf, r l = 500 2.0 6.5 0.8 c ns 0.8 c c l = 50 pf, r ta = ?40 to 85c symbol min max unit test conditions plh t phl ?
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 5 of 10 analog switch characteristics ta = 25c item v cc (v) min typ max unit test conditions from (input) to (output) 1.65 ? 35 ? 2.3 ? 120 ? 3.0 ? 175 ? 4.5 ? 195 ? c l = 50 pf, r l = 600 ? 1.65 ? >300 ? 2.3 ? >300 ? 3.0 ? >300 ? frequency response (switch on) 4.5 ? >300 ? mhz c l = 5 pf, r l = 50 ? adjust fin voltage to obtain 0dbm at output when fin is 1mhz (sine wave). increase fin frequency until the db?meter reads ?3 dbm. 20 log(v o /v i ) = ?3 dbm inout or outin outin or inout 1.65 ? 35 ? 2.3 ? 50 ? 3.0 ? 70 ? crosstalk (control input to signal output) 4.5 ? 100 ? mv c l = 50 pf, r l = 600 ? adjust rl value to obtain 0a at i in/out when fin is 1mhz (square wave) cont outin or inout 1.65 ? ?58 ? 2.3 ? ?58 ? 3.0 ? ?58 ? 4.5 ? ?58 ? c l = 50 pf, r l = 600 ? 1.65 ? ?42 ? 2.3 ? ?42 ? 3.0 ? ?42 ? feed through attenuation (switch off) 4.5 ? ?42 ? db c l = 5 pf, r l = 50 ? adjust fin voltage to obtain 0dbm at input when fin is 1mhz (sine?wave) inout or outin outin or inout 1.65 ? 0.1 ? 2.3 ? 0.025 ? 3.0 ? 0.015 ? 4.5 ? 0.01 ? c l = 50 pf, r l = 10 k ? fin = 1 khz (sine?wave) 1.65 ? 0.15 ? 2.3 ? 0.025 ? 3.0 ? 0.015 ? sine?wave distortion 4.5 ? 0.01 ? % c l = 50 pf, r l = 10 k ? fin = 10 khz (sine?wave) v i =1.4v p?p , v cc =1.65v v i =2.0v p?p , v cc =2.3v v i =2.5v p?p , v cc =3.0v v i =4.0v p?p , v cc =4.5v inout or outin outin or inout operating characteristics ta = 25c item symbol v cc (v) min typ max unit test conditions 1.8 ? 8 ? 2.5 ? 9 ? 3.3 ? 9 ? power dissipation capacitance c pd 5.0 ? 11 ? pf f = 10 mhz adjust fin voltage to obtain 0dbm at input when fin is 1mhz (sine?wave) l = 50 pf, r l = 10 k ? ? operating characteristics symbol v power dissipation capacitance c power dissipation capacitance c pd
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 6 of 10 test circuit v out v cc + ? v cc gnd (on) v v =v c ih v =v ? r on in cc i s v in?out r = on i s (?) v in?out v cc v cc gnd (off) a v =v c il v =v or gnd in cc v =gnd or v out cc v cc v cc gnd (on) a v =v c ih v =v or gnd in cc v open out ? i (off), i (on) ss v =gnd or v out v =gnd out v =gnd cc or v cc or v v =v c ih v =v c ih v =v v =v or gnd in v =v in v =v cc v =v cc v =v
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 7 of 10 test circuit (cont.) open open test s1 vtt vtt s1 c l r l r l gnd gnd t / t plh phl t / t zh hz t / t zl lz 1.80.15 2.50.2 3.30.3 5.00.5 inputs v cc (v) v cc 2 v cc 2 v cc 2 v cc 2 v cc v cc / 2 v cc / 2 v cc / 2 v cc / 2 v cc v cc v cc v i v ref c l r l ? v vtt t r / t f 500 ? 0.15 v 0.15 v 0.3 v 0.3 v 500 ? 500 ? 1.0 k ? load circuit from output 2 ns 2 ns 2.5 ns 2.5 ns 30 pf 30 pf 50 pf 50 pf v ref v ref v ref v ref v i 0 v t plh v t phl oh v ol input output v oh v ol control input v ref v ref v ref v oh ? ? v v ol + ? v v ref v i v oh 0 v v ol t hz t lz t zh t zl output (waveform ? a) output (waveform ? b) notes: 1. c l includes probe and jig capacitance. 2. waveform?a is for an output with internal conditions such that the output is low except when disabled by the output control. 3. waveform?b is for an output with internal conditions such that the output is high except when disabled by the output control. 4. all input pulses are supplied by generators having the following characteristics: prr 10mhz, zo = 50 ? . 5. the output are measured one at a time with one transition per measurement. v ref t phl v ref t zl v ref t zh
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 8 of 10 frequency response (switch on) v cc v = v 0.1 f c v in v out ih v cc f in f = sine wave in gnd (on) c = 50 pf l r = 600 l ? r = 50 l ? v /2 cc or 50 ? or 5 pf feedthrough attenuation (switch off) v cc v = v 0.1 f c v in v out v /2 cc il v cc f in gnd (off) c = 50 pf or 5 pf l r = 600 l ? ? v /2 cc r = 600 l ? r = 50 l ? 600 ? crosstalk (control input to signal output) v out v /2 cc c = 50 pf l r = 600 l ? v /2 cc r = 600 l ? v cc v c v cc gnd r = 50 l ? sine-wave distortion v cc v = v 10 f c v in v out v /2 cc ih v cc f in gnd 10 f (on) c = 50 pf l r = 10 k l ? or 50 ? or 50 feedthrough attenuation (switch off) v cc v cc v v = v 0.1 ? ? ? ?
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 9 of 10 package dimensions tbs-5v eiaj package code jedec code mass (g) lead material 0.001 ? ? symbol dimension in millimeters min typ max a 0.50 0.15 0.35 0.05 0.05 0.20 0.19 0.90 1.40 0.50 0.20 0.20 0.15 0.17 0.10 a 1 a 2 b d e e x y 1 y zd ze e e zd ze b c b a 12 pin #1 index area a d c seating plane 5 b c m a b y c c m a 1 a 2 a e y 1 c/ / symbol 5
hd74lvc1g66 rev.3.00 jul. 01, 2004 page 10 of 10 tbs-5av eiaj package code jedec code mass (g) lead material 0.001 ? ?
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas technology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvements or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distributor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas technology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materials. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a license from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500 fax: <1> (408) 382-7501 renesas technology europe limited. dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, united kingdom tel: <44> (1628) 585 100, fax: <44> (1628) 585 900 renesas technology europe gmbh dornacher str. 3, d-85622 feldkirchen, germany tel: <49> (89) 380 70 0, fax: <49> (89) 929 30 11 renesas technology hong kong ltd. 7/f., north tower, world finance centre, harbour city, canton road, hong kong tel: <852> 2265-6688, fax: <852> 2375-6836 renesas technology taiwan co., ltd. fl 10, #99, fu-hsing n. rd., taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology (shanghai) co., ltd. 26/f., ruijin building, no.205 maoming road (s), shanghai 200020, china tel: <86> (21) 6472-1001, fax: <86> (21) 6415-2952 renesas technology singapore pte. ltd. 1, harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas sales offices ? 2004. renesas technology corp., all rights reserved. printed in japan. colophon .1.0 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o r errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas techn ology corp. semiconductor 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materi 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lic cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is 8. please contact renesas technology corp. for further details on these materials or the products contained therein. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500 fax: <1> (408) 382-7501 renesas technology europe limited. dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, united kingdom tel: <44> (1628) 585 100, fax: <44> (1628) 585 900 renesas technology europe gmbh dornacher str. 3, d-85622 feldkirchen, germany tel: <49> (89) 380 70 0, fax: <49> (89) 929 30 11 hong kong ltd. 7/f., north tower, world finance centre, harbour city, canton road, hong kong tel: <852> 2265-6688, fax: <852> 2375-6836

▲Up To Search▲

Price & Availability of HD74LVC1G66CLE

	To Download HD74LVC1G66CLE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .