View DF30FB-60DS-04V81_6786385.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

a283 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors df30 series overview continuous miniaturization and increased component density on pcb created demand for extremely low profile connectors. this series is addition of a new extremely low profile connectors to hirose's wide range of high reliability board-to-board/board-to-fpc connection solutions. features 1. contact reliability concentration of the contact's normal forces at the single point assures good contact wipe and electrical reliability, while confirming the fully mated condition with a definite tactile click. 2. self alignment recognizing the difficulties of mating extremely small connectors in limited spaces the connectors will self align in horizontal axis within 0.3 mm. 3. automatic board placement packaged on tape-and-reel the plug and headers have sufficiently large flat areas to allow pick-up with vacuum nozzles of automatic placement equipment. 4. variety of contact positions and styles available in standard contact positions of: 20, 22, 24, 30, 34, 40, 50, 60, 70 and 80 with and without metal fittings. addition of metal fittings does not affect external dimensionsof the connectors. smaller contact positions are also available. 5. support for continuity test connector connectors which have increased insertion and removal durability are available for continuity tests. contact your hirose sales representative for details. applications cellular phones, pda's, mobile computers, digital cameras, digital video cameras, and other devices demanding high reliability connections in extremely limited spaces. extremely small size 40 positions shown (3.76) (4.56) (0.90) header receptacle (0.40) (10.22) low profile increased mated retention high contact reliability df30*-*ds-0.4v receptacle 0.9mm df30*-*dp-0.4v header protrusion improves mated retention self alignment 0.3mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors contact pitch: 0.4 mm termination section v: straight smt packaging (81): embossed tape packaging (5,000 pieces per reel) (82): embossed tape packaging (1,000 pieces per reel) a284 1. insulation resistance 50 m? min. 100v dc 2. withstanding voltage no flashover or insulation breakdown. 100v ac / one minute 3. contact resistance 100 m? max. 100 ma 4. vibration no electrical discontinuity of 1 s or more frequency: 10 to 55 hz, single amplitude of 0.75mm, 2 hours, 3 axis 5. humidity contact resistance: 100 m? max. insulation resistance: 25 m? min. 6. temperature cycle 7. durability contact resistance: 100 m? max. 50 cycles(connector for conductivity tests: 500 cycles) (insertions/withdrawals) 8. resistance to no deformation of components reflow: at the recommended temperature profile soldering heat affecting performance. manual soldering: 350 ? for 3 seconds materials and finishes item specification conditions temperature: -55 ? / + 5 ? to + 35 ? / + 85 ? / + 5 ? to + 35 ? duration: 30 / 10 / 30 / 10(minutes) 5 cycles contact resistance: 100 m? max. insulation resistance: 50 m? min. 96 hours at temperature of 40 ? 2 ? and rh of 90% to 95% product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating rated current 0.3a rated voltage 30v ac storage temperature range -10 ? to 60 ? (note 2) storage humidity range relative humidity 40% to 70% (note 2) operating temperature range : -35 ? to 85 ? (note 1) operating humidity range : relative humidity 20% to 80% ordering information receptacles and headers connectors receptacles and headers insulator contacts metal fittings lcp phosphor bronze phosphor bronze color : black gold plated tin plated ul94v-0 ------------- ------------- component material finish remarks df30 fc * * ds - 0.4 v ( * * * * ) series name: df30 configuration fb: with metal fittings, without bosses fc: without metal fittings, without bosses cj: connector for conductivity tests number of positions: 20, 22, 24, 30, 34, 40, 50, 60, 70, 80 connector type ds: double row receptacle dp: double row header 1 2 7 3 4 6 5 3 4 56 7 1 2 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a285 df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors unit: mm note 1: order by number of reels. note 2: receptacles with 24 or fewer contacts positions will not have recessed areas. [specification number - **, ( ** ) ( 81 ): embossed tape packaging ( 5,000 pieces per reel ) ( 82 ): embossed tape packaging ( 1,000 pieces per reel ) part number df30fb-20ds-0.4v ( ** ) df30fb-22ds-0.4v ( ** ) df30fb-24ds-0.4v ( ** ) df30fb-30ds-0.4v ( ** ) df30fb-34ds-0.4v ( ** ) df30fb-40ds-0.4v ( ** ) df30fb-50ds-0.4v ( ** ) df30fb-60ds-0.4v ( ** ) df30fb-70ds-0.4v ( ** ) df30fb-80ds-0.4v ( ** ) cl684-1098-3- ** cl684-1099-6- ** cl684-1100-3- ** cl684-1101-6- ** cl684-1102-9- ** cl684-1103-1- ** cl684-1104-4- ** cl684-1105-7- ** cl684-1106-0- ** cl684-1107-2- ** 20 22 24 30 34 40 50 60 70 80 0 6.22 0 6.62 0 7.02 0 8.22 0 9.02 10.22 12.22 14.22 16.22 18.22 0 3.6 0 4.0 0 4.4 0 5.6 0 6.4 0 7.6 0 9.6 11.6 13.6 15.6 1.2 0 1.2 0 1.2 0 1.2 0 1.36 1.6 0 2.0 0 2.4 0 2.8 0 3.2 0 0 5.72 0 6.12 0 6.52 0 7.72 0 8.52 0 9.72 11.72 13.72 15.72 17.72 0 6.52 0 6.92 0 7.32 0 8.52 0 9.32 10.52 12.52 14.52 16.52 18.52 yes cl no. number of contacts a b c d e rohs recommended solder paste thickness: 120 m p=0.40.02 b0.02 3.46 4.86 0.230.02 d e +0.05 0 0 -0.05 0 -0.05 +0.05 0 2.74 +0.05 0 hrs logo 0.08 b note 2 a p=0.4 cav. no. 3.76 4.56 0.9 0.15 flat surface c 2.54 metal fittings receptacles (with metal fittings) b recommended pcb mounting pattern the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors a286 unit: mm note 1: order by number of reels. note 2: receptacles with 24 or fewer contacts positions will not have recessed areas. [specification number] - **, ( ** ) ( 81 ): embossed tape packaging ( 5,000 pieces per reel ) ( 82 ): embossed tape packaging ( 1,000 pieces per reel ) part number df30fc-20ds-0.4v ( ** ) df30fc-22ds-0.4v ( ** ) df30fc-24ds-0.4v ( ** ) df30fc-30ds-0.4v ( ** ) df30fc-34ds-0.4v ( ** ) df30fc-40ds-0.4v ( ** ) df30fc-50ds-0.4v ( ** ) df30fc-60ds-0.4v ( ** ) df30fc-70ds-0.4v ( ** ) df30fc-80ds-0.4v ( ** ) cl684-1109-8- ** cl684-1110-7- ** cl684-1111-0- ** cl684-1112-2- ** cl684-1113-5- ** cl684-1078-6- ** cl684-1114-8- ** cl684-1082-3- ** cl684-1115-0- ** cl684-1116-3- ** 20 22 24 30 34 40 50 60 70 80 0 6.22 0 6.62 0 7.02 0 8.22 0 9.02 10.22 12.22 14.22 16.22 18.22 0 3.6 0 4.0 0 4.4 0 5.6 0 6.4 0 7.6 0 9.6 11.6 13.6 15.6 1.2 0 1.2 0 1.2 0 1.2 0 1.36 1.6 0 2.0 0 2.4 0 2.8 0 3.2 0 yes cl no. number of contacts a b c rohs p=0.4 0.02 b 0.02 3.46 4.86 0.23 0.02 recommended solder paste thickness: 120 m +0.05 0 0 -0.05 hrs logo 0.08 b a 3.76 4.56 0.9 0.15 flat surface c p=0.4 cav. no. note 2 receptacles (without metal fittings) b recommended pcb mounting pattern the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a287 df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors unit: mm note 1: order by number of reels. note 2: headers with 24 or fewer contacts positions will not have protruding areas. [specification number - **, ( ** ) ( 81 ): embossed tape packaging ( 5,000 pieces per reel ) ( 82 ): embossed tape packaging ( 1,000 pieces per reel ) 2 3.42 0.23 0.02 p=0.4 0.02 b 0.02 d e recommended solder paste thickness: 120 m +0.05 0 1.3 +0.05 0 0 -0.05 +0.05 0 0 -0.05 note 2 note 2 0.15 hrs logo flat surface c p=0.4 cav. no. b a a 2.32 3.12 0.8 1.1 0.08 metal fittings header (with metal fittings) b recommended pcb mounting pattern part number df30fb-20dp-0.4v ( ** ) df30fb-22dp-0.4v ( ** ) df30fb-24dp-0.4v ( ** ) df30fb-30dp-0.4v ( ** ) df30fb-34dp-0.4v ( ** ) df30fb-40dp-0.4v ( ** ) df30fb-50dp-0.4v ( ** ) df30fb-60dp-0.4v ( ** ) df30fb-70dp-0.4v ( ** ) df30fb-80dp-0.4v ( ** ) cl684-1129-5- ** cl684-1130-4- ** cl684-1131-7- ** cl684-1132-0- ** cl684-1133-2- ** cl684-1134-5- ** cl684-1135-8- ** cl684-1074-5- ** cl684-1075-8- ** cl684-1136-0- ** 20 22 24 30 34 40 50 60 70 80 0 5.14 0 5.54 0 5.94 0 7.14 0 7.94 0 9.14 11.14 13.14 15.14 17.14 0 3.6 0 4.0 0 4.4 0 5.6 0 6.4 0 7.6 0 9.6 11.6 13.6 15.6 1.2 0 1.2 0 1.2 0 1.2 0 1.36 1.6 0 2.0 0 2.4 0 2.8 0 3.2 0 0 4.64 0 5.04 0 5.44 0 6.64 0 7.44 0 8.64 10.64 12.64 14.64 16.64 0 5.44 0 5.84 0 6.24 0 7.44 0 8.24 0 9.44 11.44 13.44 15.44 17.44 yes cl no. number of contacts a b c d e rohs the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors a288 unit: mm note 1: order by number of reels. note 2: headers with 24 or fewer contacts positions will not have protruding areas. [specification number] - **, ( ** ) ( 81 ): embossed tape packaging ( 5,000 pieces per reel ) ( 82 ): embossed tape packaging ( 1,000 pieces per reel ) 2 3.42 0.230.02 p=0.40.02 b 0.02 recommended solder paste thickness: 120 m +0.05 0 0 -0.05 note 2 note 2 0.08 0.15 cav. no. hrs logo flat surface c p=0.4 b a 2.32 3.12 0.8 a header (without metal fittings) b recommended pcb mounting pattern part number df30fc-20dp-0.4v ( ** ) df30fc-22dp-0.4v ( ** ) df30fc-24dp-0.4v ( ** ) df30fc-30dp-0.4v ( ** ) df30fc-34dp-0.4v ( ** ) df30fc-40dp-0.4v ( ** ) df30fc-50dp-0.4v ( ** ) df30fc-60dp-0.4v ( ** ) df30fc-70dp-0.4v ( ** ) df30fc-80dp-0.4v ( ** ) cl684-1138-6- ** cl684-1139-9- ** cl684-1140-8- ** cl684-1141-0- ** cl684-1142-3- ** cl684-1079-9- ** cl684-1143-6- ** cl684-1083-6- ** cl684-1077-3- ** cl684-1144-9- ** 20 22 24 30 34 40 50 60 70 80 0 5.14 0 5.54 0 5.94 0 7.14 0 7.94 0 9.14 11.14 13.14 15.14 17.14 0 3.6 0 4.0 0 4.4 0 5.6 0 6.4 0 7.6 0 9.6 11.6 13.6 15.6 1.2 0 1.2 0 1.2 0 1.2 0 1.36 1.6 0 2.0 0 2.4 0 2.8 0 3.2 0 yes cl no. number of contacts a b c rohs the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a289 df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors unit: mm embossed tape 32mm or wider will have perforated feed holes on two sides. unreeling direction h ?1.5 + 0 .1 0 f f f-f g g g-g 0.20.05 r0.75 +0.1 0 r0.75 + 0.1 0 0.30.1 1.750.1 b0.1 a0.3 c0.1 20.1 40.1 80.1 1.40.15 h aa a (1.7) ?130.2 ?801 ?3802 d0.5 e1 part number label ps unreeling direction b packaging specification embossed carrier tape dimensions - receptacle reel dimensions part number df30#-20ds-0.4v ( ** ) df30#-22ds-0.4v ( ** ) df30#-24ds-0.4v ( ** ) df30#-30ds-0.4v ( ** ) df30#-34ds-0.4v ( ** ) df30#-40ds-0.4v ( ** ) df30#-50ds-0.4v ( ** ) df30#-60ds-0.4v ( ** ) df30#-70ds-0.4v ( ** ) df30#-80ds-0.4v ( ** ) 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 24.0 32.0 28.4 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 11.5 11.5 11.5 11.5 14.2 17.5 17.5 17.5 17.5 17.5 25.5 25.5 25.5 25.5 33.5 21.5 21.5 21.5 21.5 21.5 29.5 29.5 29.5 29.5 37.5 a b c d e the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors a290 embossed carrier tape dimensions - header unreeling direction 0.30.1 80.1 ?1.5 + 0 .1 0 e-e f-f 1.750.1 b0.1 a0.3 40.1 f f e e 1.30.15 (1.6) 20.1 aa a reel dimensions ?130.2 ?801 ?3802 c0.5 d1 part number label ps unreeling direction unit: mm part number df30 # -20dp-0.4v ( ** ) df30 # -22dp-0.4v ( ** ) df30 # -24dp-0.4v ( ** ) df30 # -30dp-0.4v ( ** ) df30 # -34dp-0.4v ( ** ) df30 # -40dp-0.4v ( ** ) df30 # -50dp-0.4v ( ** ) df30 # -60dp-0.4v ( ** ) df30 # -70dp-0.4v ( ** ) df30 # -80dp-0.4v ( ** ) 16.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 24.0 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 0 7.5 11.5 11.5 11.5 11.5 17.5 17.5 17.5 17.5 17.5 17.5 25.5 25.5 25.5 25.5 21.5 21.5 21.5 21.5 21.5 21.5 29.5 29.5 29.5 29.5 a b c d the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a291 df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors b usage recommendations 2. recommended manual soldering 3. recommended screen thickness and open area ratio (pattern area ratio) 4. board warpage 5. cleaning conditions 6. precautions 1. recommended temperature profile note 1: up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. note 2: the temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. due to the extremely small size of the connectors, handling it with bare hands should be avoided. follow the recommendations given on the proceeding pages. mating and un-mating of the connectors when not soldered on the boards is not recommended as this may cause deformation of the terminals, damage to the contacts or insulators. mated connectors should not carry weight of the board by themselves. provide some other support of the boards. when mating/un-mating do not twist or lift by the corners. apply the forces evenly across the entire length and width of the connectors taking care not to damage or deform soldered terminations. exercise extreme caution when mating/ un-mating when the connector is mounted on a non-rigid (flexible) substrate. do not pull on the flexible substrate. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. refer to "nylon connector use handbook". maximum of 0.02 mm at the connector center, with both ends of the connector as reference points. manual soldering: 340 10 ? for 3 seconds thickness: 0.12 mm opening are ratio: ds side 100%, dp side 84% (time) 220 10 to 20 sec. preheating soldering 60 to 90 sec. 100? 150? 200? 250? 240 (temperature) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors a292 b handling precautions when mating the connectors keep the connectors parallel to each other when positioning. do not attempt to mate the connectors starting at one end or side. press-down evenly until slight resistance is felt. overcoming this slight resistance will complete the mating of receptacle with the header. a definite "click" sensation will confirm the fully mated condition. df30*-*ds-0.4v(81) df30*-*dp-0.4v(81) 0.3mm receptacle header 0.3mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a293 df30 series 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connectors b handling precautions when un-mating the connectors df30*-*ds-0.4v(81) df30*-*dp-0.4v(81) receptacle header lift even one side, keeping both boards parallel to each other. fully mated when handling circumstances prevent the connector from being kept level during un-mating, one end may be lifted separate as shown on fig. a. however, to utilize this procedure the connector must be mounted on a sufficiently rigid circuit board. any deflection of the board during this operation may result in damage to the connector or solder joints. do not attempt the start of the un-mating of the connectors from one side (fig. b). when removal is from the width orientation as illustrated in the diagram to the left, damage could be caused to the connector. do not perform removal from the width orientation. fig. a fig. b the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of DF30FB-60DS-04V81

	To Download DF30FB-60DS-04V81 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .