data sheet part number 856684 140 mhz saw filter subject to change or obsolescence without notice rev a 12-07 triquint semiconductor, inc. ? page 1 o f 5 features for 3 carrier wcdma applications usable bandwidth 15 mhz low loss high attenuation designed to minimize evm single-ended operation ceramic surface mount package (smp) hermetic rohs compliant (2002/95/ec), pb-free package pin configuration surface mount 13.30 x 6.50 x 1.75 mm bottom view smp-53a 12 11 10 9 8 7 6 5 4 3 2 1 pin no. description 5 output 11 input 1,2,3,4,6 case ground 7,8,9,10,12 case ground 1.75 nom. 1.96 max. 0.76 0.79 1.17 x 3.76 1.50 2.54 6.50 2.18 2.54 13.3 dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m m, over a 2 - 6 m m ni plating pb
data sheet part number 856684 140 mhz saw filter subject to change or obsolescence without notice rev a 12-07 triquint semiconductor, inc. ? page 2 o f 5 electrical specifications (1) operating temperature range (2) -40 to +85 o c parameter (3) minimum typical (4) maximum unit center frequency - 140 - mhz insertion loss at 140 mhz - 9.1 10.5 db lower 1 db bandedge (5) upper 1 db bandedge - 147 131.91 148.09 133 - mhz mhz lower 3 db bandedge (5) upper 3 db bandedge - 147.5 131.40 148.65 132.50 - mhz mhz lower 30 db bandedge (5) upper 30 db bandedge 129.5 - 130.15 150.19 - 151.5 mhz mhz lower 35 db bandedge (5) upper 35 db bandedge 129 - 130.06 150.30 - 153 mhz mhz 35 db bandwidth - 20.26 22 mhz amplitude ripple (6) 135.5 C 144.5 mhz - 0.24 0.7 db p-p absolute group delay 133.0 C 147.0 mhz - 0.89 1.1 s group delay variation 133.0 C 147.0 mhz - 44 90 ns phase linearity 133.0 C 147.0 mhz - 3.97 8.0 deg evm (error vector magnitude) 133.0 C 147.0 mhz - 1.69 - % input and output vswr 133.0 C 147.0 mhz - 1.61 2.5 db relative attenuation (5) 40.0 C 110.0 mhz 110.0 C 122.0 mhz 122.0 C 129.0 mhz 152.0 C 159.0 mhz 159.0 C 168.0 mhz 168.0 C 240.0 mhz 48 45 35 33 40 48 55 53 45 37 44 55 - - - - - - db db db db db db source impedance (7) - 50 w - w load impedance (7) - 50 w - w power handling - - +10 dbm notes : 1. all specifications are based on triquint test ci rcuit shown on page 4 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measuremen ts at room temperature 5. all attenuation measurements are referenced to l oss at center frequency 6. amplitude ripple is defined as the worse peak to adjacent valley within defined frequency points 7. this is the optimum impedance in order to achiev e the performance shown
data sheet part number 856684 140 mhz saw filter subject to change or obsolescence without notice rev a 12-07 triquint semiconductor, inc. ? page 3 o f 5 typical performance (at room temperature)
data sheet part number 856684 140 mhz saw filter subject to change or obsolescence without notice rev a 12-07 triquint semiconductor, inc. ? page 4 o f 5 matching schematics actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input 1,2,3,4,6 7,8,9,10,12 50 w ww w 22nh 11 5 50 w ww w 56pf 43nh 22pf 43nh 50 w single-ended output marking pcb footprint jjjyhh date code id dot triquint 856684 1.70 13.51 .99 1.55 8.61 3.53 .99 1.70 6.70 the date code consists of: day of the current year (julian, 3 digits), last digit of the year (1 digit) and hou r (2 digits) this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel a a 24 1.75 11.5 ?1.5 2.3 13.9 4.0 ?1.5 2.0 0.3 12.0 7.1 section a-a direction of travel ?330 24.8 2.7 ?102 ?13.0 ?20.2 2.0 id dot dimensions shown are nominal in millimeters packaging quantity: 2000 units/reel
data sheet part number 856684 140 mhz saw filter subject to change or obsolescence without notice rev a 12-07 triquint semiconductor, inc. ? page 5 o f 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t -40 +85 o c storage temperature range t stg -40 +85 o c important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102, pb-free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
