smt power inductors - do1606 series document 213-1 specifications subject to change without notice. document 213-1 revised 09/08/03 this series is designed for applica- tions requiring high inductance, high current and an ultra-low profile. the do1606 measures only 2 mm high and has a footprint of just 5,3 x 6,5 mm. but despite this small size, it is available in versions that will handle up to 2.5 amps. the series covers a wide range of inductance values from 1 h to 1 mh. the core is completely enclosed in a rugged ceramic case giving it a flat top that provides the optimum surface for reliable pick and place operations. samples of all standard values are available in coilcraft designer's kit c138. to order, please contact coilcraft or purchase the kit on-line at http://order.coilcraft.com . 1 part number on reel label will have a b or c suffix to indicate packaging. 2. inductance tested at 100 khz, 0.1 vrms, 0 vdc. 3. dc current at which the inductance drops 10% (typ) from its value without current. 4. average current for a 40c rise above 25c ambient. 5. operating temperature range -40c to +85c. 6. electrical specifications at 25c. see qualification standards section for environmental and test data. part l 20% 2 dcr max srf ref i sat 3 i rms 4 number 1 (h) (ohms) (mhz) (a) (a) do1606t-102 1.0 0.04 230 2.5 2.3 do1606t-152 1.5 0.06 180 2.2 2.1 do1606t-222 2.2 0.07 140 1.8 1.7 do1606t-332 3.3 0.12 110 1.4 1.3 do1606t-472 4.7 0.15 100 1.2 1.1 do1606t-682 6.8 0.20 80 1.1 1.0 do1606t-103 10 0.30 60 1.0 0.90 do1606t-153 15 0.40 45 0.8 0.70 do1606t-223 22 0.54 35 0.6 0.50 do1606t-333 33 0.74 30 0.5 0.45 do1606t-473 47 1.1 22 0.45 0.40 do1606t-683 68 1.6 20 0.35 0.35 do1606t-104 100 2.3 15 0.30 0.30 do1606t-154 150 3.5 10 0.25 0.25 do1606t-224 220 5.7 9 0.20 0.18 do1606t-334 330 8.2 8 0.16 0.16 do1606t-474 470 10.8 7 0.14 0.12 do1606t-684 680 17.2 5 0.12 0.10 do1606t-105 1000 22.6 4 0.08 0.08 0.206 5,23 max 0.256 6,50 0.080 2,03 0.029 0,74 max 0.079 2,00 max 0.090 2,29 0.190 4,83 0.270 6,86 0.040 1,02 recommended land pattern xxx weight: 116 ? 136 mg tape and reel: 750/7 reel; 2500/13 reel 12 mm tape width for packaging data see tape and reel specifications section.
smt power inductors - do1606 series typical l vs frequency typical l vs current document 213-2 specifications subject to change without notice. document 213-2 revised 11/14/02
|
