e series cg01-j 295 characteristic frequency temperature dielectric unloaded code coefficient constant q ( f ) (ppm/?) ( r ) (at 10ghz) c 0 24.2 0.4 d 2 24.4 0.4 20,000 min. e 4 24.7 0.4 f 6 24.9 0.4 part number dr 0.05 lr 0.05 frequency range (mm) (mm) (ghz) drd028e 103 2.82 1.25 23.17 to 25.15 drd031e 014 3.06 1.36 21.27 to 23.17 drd033e 015 3.33 1.48 19.48 to 21.27 drd036e 016 3.62 1.61 17.93 to 19.48 drd039e 018 3.94 1.76 16.47 to 17.93 drd043e 019 4.28 1.91 15.16 to 16.47 drd046e 021 4.65 2.06 13.95 to 15.16 drd051e 022 5.06 2.24 12.82 to 13.95 drd055e 024 5.50 2.44 11.80 to 12.82 drd060e 027 5.98 2.65 10.85 to 11.80 drd065e 029 6.50 2.88 9.98 to 10.85 drd071e 031 7.07 3.14 9.18 to 9.98 drd077e 034 7.69 3.41 8.44 to 9.18 high frequency devices dielectric resonators drd & drt ls lr dr do lr dr lr dr dr lo support resomics copper cavity drt drd configuration part numbering dimensions & frequency range drd type general characteristics high unloaded q 20,000 min. @ 10ghz. high dielectric constant ? r 24.5. the resonant frequency temperature coefficient can be chosen from 0 to 6ppm/?. tolerance of frequency temperature coefficient can be chosen 1, 2ppm/?. dielectric resonators are chosen from the frequency range of 8.4 to 25ghz in disk type (drd), and from the frequency range of 8.4 to 19.5ghz in cylindrical type (drt). e-series is also fit for application above 25ghz. please consult us. drt type part number dr 0.05 dr 0.1 lr 0.05 frequency (mm) (mm) (mm) range (ghz) drt036e013 016 3.62 1.3 1.61 17.93 to 19.48 drt039e013 018 3.94 1.3 1.76 16.47 to 17.93 drt043e013 019 4.28 1.3 1.91 15.16 to 16.47 drt046e020 021 4.65 2.0 2.06 13.95 to 15.16 drt051e020 022 5.06 2.0 2.24 12.82 to 13.95 drt055e020 024 5.50 2.0 2.44 11.80 to 12.82 drt060e020 027 5.98 2.0 2.65 10.85 to 11.80 drt065e020 029 6.50 2.0 2.88 9.98 to 10.85 drt071e020 031 7.07 2.0 3.14 9.18 to 9.98 drt077e020 034 7.69 2.0 3.41 8.44 to 9.18 special code tolerance of frequency temperature coefficient (ppm/?) no code 2 a1 q can be approximated by: q 200,000 fo fo = [ghz] drt 055 e 020 024 a drd = disk type outside diameter material inside diameter f (resonant freq., t.c.) thickness f tolerance drt = cylindrical type (dr) type (dr) for drt only as shown in table 1 (lr) as shown in table 2 note: for actual dimension in mm, divide number by 10. table 1: q & f table 2: f tolerance high frequency devices
|
