View FX15S-51P-C_6842521.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 1mm pitch cable-to-board connectors supporting lvds signal fx15 series 2007.1 contacts consolidated into 1 row for equal length transmission lines mating side: 1 mm pitch, staggered 2-row construction termination side: 0.5 mm pitch, 1-row construction features 1. space saving reduction in space is achieved by designing the contacts in 2-row staggered 1 mm pitch on the mating side and on a single row 0.5 mm pitch on the termination side (fig. 1). 2. equal length transmission lines contact configuration creates equal length transmission lines preventing deterioration of lvds signal within the connector (fig.1). 3. different types availability of types with or without metal shields allows flexibility of applications and cost reduction. 4. self alignment and self-guiding built-in guide posts allow secure self-alignment within 1.5 mm (fig.2). 5. secure and complete mating / unmating side latch-locks assure and confirm complete and secure mating of plugs to receptacles while permitting ease of disconnection (fig. 3). 6. enhanced shielding effectiveness availability of version with enlarged metal shields (preventing intrusion or emission of the electromagnetic interference) further protects the integrity of lvds signal (fx15s series, fig.4) 7. rohs compliant all components and materials comply with the reqirements of eu directive 2002/95/ec. applications fpd-tv, fpd panels and other applications requiring secure and reliable connection and transmission signal integrity. space saving, equal length transmission lines self-alignment of 1.5 mm side latch -locks q w patent pending large guide post 1.5mm 1.5mm 1.5mm with metal shields (fx15 and fx15s series) without metal shields (fx15m series) q w 0 0.1 0.2 0.3 0.5 1 2 3 1.5 -10 -20 -30 -40 -50 frequency (ghz) with metal without metal emission noise level (dbm) new high shielding effectivness fig.1 fig.2 fig.3 fig.4 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
1 ma 100v dc 300v ac/one minute with corresponding connector 50 cycles frequency: 10 to 55 hz, single amplitude of 0.76mm, 2 hours, 3 axis acceleration of 490m/s 2 , 11ms durations, sine half-wave waveform, 3 cycles, 3axis. 96 hours at 40?, rh 90% to 95% temperature : -55? +15? to +35? +85? +15? to +35? time : 30 5 30 5 (minutes) 5 cycles 5% water solution for 48 hours. 2 60 m ohms max. (note 3) 500 m ohms min. no flashover or insulation breakdown. 0.2n min., 30n max. contact resistance: 80 m ohms max . (note 3) no electrical discontinuity of 1 s or more. no electrical discontinuity of 1 s or more. contact resistance: 80 m ohms max. no damage, cracks, or parts dislocation. (note 3) contact resistance: 80 m ohms max. (note 3) insulation resistance: 500 m ohms min. contact resistance: 80 m ohms max. (note 3) no corrosions materials and finishes ordering information ul94v-0 --------------- --------------- --------------- material finish remarks component insulator contact metal shields metal fittings polyamide phosphor bronze nickel silver phosphor bronze color: black contact area: gold plated termination area: tin plated --------------- selective gold flash plated product specifications ratings current rating voltage rating 0.5a 100v ac operating temperature range storage temperature range -55? to +80? (note 1) -10? to +60? (note 2) 1. contact resistance 2. insulation resistance 3. withstanding voltage 4. insertion-extraction force 5. durability (mating/un-mating) 6. vibration 7. shock 8. humidity 9. temperature cycle 10. salt spray item specification conditions note 1: includes temperature rise caused by current flow. note 2: the term storage refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. note 3: includes wire conductor resistance (12mm long). receptacle ul94v-0 --------------- --------------- --------------- material finish remarks component insulator contact metal shields metal latch-locks polyamide phosphor bronze nickel silver stainless steel color: black contact area: gold plated termination area: tin plated --------------- --------------- plug fx15 s - 31 s - 0.5 sh 1 6 3 2 4 5 receptacle fx15 s - 31 p - c 1 3 2 4 7 plug fx15 - 3032 pcf a 1 2 9 8 10 crimp contact 1 2 3 4 5 6 7 8 9 10 series name configuration number of contacts connector type contact pitch housing configuration termination applicable conductor packaging plating (contact area) : fx15 blank : with shields (or crimp contact) 15s : with shields C enhanced shielding 15m : without shields p : male contact s : female contact : 0.5 mm sh : right angle sv : straight c : crimp 3032 : awg 30 to 32 pcf : reel/ plug contact a : gold plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
3 fx15 series ?mating diagram plugs receptacles with shields C enhanced shielding (fx15s-**p-c) right angle, with shields Cenhanced shielding (fx15s-**s-0.5sh) without shields (fx15m-**p-c) right angle, without shields (fx15m-**s-0.5sh) crimp contact (fx15-3032-pcfa) with shields-standard- fx15-31p-c vertical, with shields (fx15-31s-0.5sv) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
4 plugs no.2 no.1 no.30 no.31 polarity mark 22.570.15 (27) 9.40.3 18.30.3 (13.45) p=10.1 140.15 p=10.1 150.15 24.60.3 2.70.1 3.70.3 part number fx15s-31p-c fx15s-41p-c FX15S-51P-C cl575-2106-6 cl575-2107-9 cl575-2103-8 31 41 51 27 32 37 24.6 29.6 34.6 22.6 27.6 32.6 18.3 23.3 28.3 14 19 24 15 20 25 yes cl no. number of contacts a rohs yes rohs f e d c b with shields ( fx15-31p-c ) 3.70.3 40.3 b0.3 (a) 9.40.3 d0.3 c0.15 (13.45) 2.70.1 e0.15 p=10.1 p=10.1 f0.15 no.1 no.2 no.n no.n+1 with shields, enhanced shielding ( fx15s- ** p-c ) note 1: packaged in trays. note 2: dimensions in parenthesis ( ) are reference dimensions. note 1: packaged in trays. note 2: dimensions in parenthesis ( ) are reference dimensions. part number fx15-31p-c cl575-2101-2 31 cl no. number of contacts the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
5 c0.3 f0.15 p=10.1 p=10.1 e0.15 no.1 no.n+1 no.2 no.n b0.3 9.550.3 (a) (d) (13) (13.6) 4.20.3 without shields ( fx15m- ** p-c ) part number fx15m-21p-c fx15m-31p-c cl575-2109-4 cl575-2108-1 21 31 24.8 29.8 cl no. number of contacts a b 17.6 22.6 c 13.7 18.7 d 25.8 30.8 e 9 14 f 10 15 g yes rohs plug crimp contacts cl no. part number packaging quantity finish rohs cl575-2001-8 fx15-3032pcfa reel 20,000 pieces per reel gold plated yes applicable wire size (stranded wire conductor) jacket diameter ul no. awg #30 (7/0.1 mm) awg #32 (7/0.08 mm) 0.5mm to 0.6mm 1516 and 1571 (note) product number item cl no. ap105-fx15-3032 cm-105 applicator press unit 901-4033-1 901-0005-4 0.50.15 0.90.15 0.720.1 (7) 20.15 0.350.1 t=0.150.05 note: only hrs tools must be used. note: refer to crimp condition sheet. applicable cable ( tin plated solid soft strands ) tools wire strip length: 1.2 to 1.9 mm 20.5 25.5 note 1: sold in package containing 100 pieces. order by package. note 2: dimensions in parenthesis ( ) are reference dimensions. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
6 no.1 no.2 no.31 no.30 a b cd ef p=0.50.1 150.15 19.820.2 25.70.3 40.3 5.60.3 (6) (0.8) 0.90.2 22.80.3 4.80.3 1.50.2 10.2 10.2 1.50.2 0.80.1 receptacles vertical, with shields ( fx15-31s-0.5sv ) 2 1.5 0 -0.05 3.2 +0.05 0 2-?1(th) 2-?1.4(lnd) 0.9 0 -0.1 4.1 +0.1 0 17.72 0 -0.1 21.92 +0.1 0 2.2 0 -0.1 6.7 +0.1 0 22.80.05 150.05 p=0.50.03 0.30.03(land pattern) 0.250.03(metal mask) 0.2 +0.1 0 note 1 :the co-planarity of the terminal leads is as follows: ? all signals and shield leads c and d: 0.1mm max. ? shield leads a, b, e and f: 0.15 mm max. 2 : area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered by resist f ilm. 3 : packaged on tape-and-reel, 1000 pieces per reel. 4 : dimensions in parenthesis ( ) are reference dimensions. b recommended pcb mounting pattern and metal mask dimensions yes rohs part number fx15-31s-0.5sv cl575-2201-7 31 cl no. number of contacts the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
7 4.450.1 (3) (0.2) (1.7) 0.50.1 a0.2 p=10.1 p=10.1 c0.15 d0.15 b0.2 e0.3 0.20.05 no.1 no.2 no.n no.n-1 (2.6) (4) polarity mark 4.40.3 4 5 4 right angle with shields ?nhanced shielding ( fx15s- ** s-0.5sh ) 2 2 2 3 3 l 0 -0.05 4.25 4.15 k0.05 0.50.03 0.250.03(metal mask) j 0 -0.05 h +0.05 0 g 0 -0.05 f +0.05 0 3.55 +0.05 0 2.05 0 -0.05 m +0.05 0 n23.2 0 -0.05 p26.8 +0.05 0 3.7 +0.05 0 1.45 0 -0.05 2.2 +0.05 0 1.7 0 -0.05 3.7 +0.05 0 r 13.85 s 0.30.03(land pattern) note 1 : the coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads. 2 : do not place any components in the area indicated. placement of components in this area may affect mating and latch lock operation. 3 : area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : the area marked indicates vacuum pick-and-place area for board placement with automatic equipment. 5 : vacuum pick-up area 6 : packaged on tape-and-reel, 1000 pieces per reel. 7 : dimensions in parenthesis ( ) are reference dimensions. b recommended pcb mounting pattern and metal mask dimensions part number fx15s-31s-0.5sh fx15s-41s-0.5sh fx15s-51s-0.5sh cl575-2306-5 cl575-2307-8 cl575-2303-7 31 41 51 15 20 25 hrs no. number of contacts a b 14 19 24 c 15 20 25 d 27.8 32.8 37.8 e 28.8 33.8 38.8 f 24.8 29.8 34.8 g 21.6 26.6 31.6 h 27.4 32.4 37.4 18 23 28 j k ------ 5.2 5.2 l ------ 8.8 8.8 m 13.2 18.2 23.2 n 16.8 21.8 26.8 p 24.8 29.8 34.8 r 40 45 50 yes s rohs 15 20 25 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
8 4.30.3 4.80.3 (5.5) vacuum pick and place area polarity mark no.1 no.2 no.n no.n-1 6.550.3 b0.2 d0.15 p=10.1 p=10.1 c0.15 a0.2 0.50.1 0.20.05 6.150.3 right angle, without shields ( fx15m- ** s-0.5sh ) e0.05 0.30.03(land pattern) 0.90.03 3.7 0 -0.05 7.4 +0.05 0 (1.85) 0.250.03(metal mask) 4 g 14 2 f0.05 p=0.50.03 1.9 0 -0.05 3.4 +0.05 0 2 2 part number fx15m-21s-0.5sh fx15m-31s-0.5sh cl575-2309-3 cl575-2308-0 21 31 10 15 hrs no. number of contacts a b 9 14 c 10 15 d 17.9 22.9 e 10 15 f 35 40 g yes rohs 22.4 27.4 note 1 : the co-planarity of all terminal leads is 0.1 mm max. 2 : do not place any components in the area indicated. placement of components in this area may affect mating and latch lock operation. 3 : packaged on tape-and-reel, 1000 pieces per reel. b recommended pcb mounting pattern and metal mask dimensions the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
9 packaging specifications vertical, with shields- ( fx15-31s-0.5sv ) right angle, with shields-enhanced shielding ( fx15s- ** s-0.5sh ) right angle, without shields ( fx15m- ** s-0.5sh ) reel dimensions a a a a a (4.8) (0.5) (6.3) unreeling direction 40.450.1 440.3 20.250.1 1.750.1 ?1.5 + 0.1 0 ?1.5 + 0.1 0 40.1 20.15 120.1 a0.1 b0.1 c0.3 ?1.5 +0.1 0 40.1 120.1 (0.5) (4.7) (6.7) unreeling direction a0.1 b0.1 c0.3 ?1.5 +0.1 0 40.1 20.1 120.1 (0.5) (5.15) (6.5) unreeling direction ?130.5 (1.6) (?380) (?80) (d) part number fx15s-31s-0.5sh fx15s-41s-0.5sh fx15s-51s-0.5sh cl575-2306-5 cl575-2307-8 cl575-2303-7 31 41 51 20.3 26.3 26.3 hrs no. number of contacts a 40.5 52.5 52.5 b 44 56 56 c 44.5 56.5 56.5 d part number fx15m-21s-0.5sh fx15m-31s-0.5sh cl575-2309-3 cl575-2308-0 21 31 20.2 20.2 hrs no. number of contacts a 40.4 40.4 b 44 44 c 44.5 44.5 d part number fx15-31s-0.5sv cl575-2201-7 31 hrs no. number of contacts 44.5 d the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
10 250 150? 180? 3010sec. 9030sec. 230? max 250? time (sec.) sodering (230?min) preheating(150 to 180?) 230 180 25 150 0 100 temperature (?) b recommended temperature profile hrs test conditions test boardglass epoxy 40mm30mm1mm thick solder method :reflow solder composition :paste, 96.5%sn/3%ag/0.5%cu metal mask : 0.12mm thick reflow cycles : 2 cycles the temperature profile is based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult your solder paste and equipment manufacturer for specific recommendations. b cleaning recommendations water based cleaning when using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentatio n issued by the various manufacturers of cleaning agents which describes its affects on metals, platings and plastics. remove an y moisture after cleaning. residual flux or cleaning agents in the contact areas may affect electrical performance. organic solvent cleaning solvent type room temperature cleaning heated cleaning ipa (isoporopyl alcohol) hcfc (hydrochlorofluorocarbon) yes yes yes yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
11 b technical information ( fx15s series ) eye pattern waveforms ( 700 mhz ) shielding effectiveness ( shielding characteristics comparison using a 2-chamber shielded room ) notes:the measurement value of "without plug-side shields + without receptacle-side shields are taken as the zero level of the graph vertical axis db. the respective results express the noise suppression effect (db) as a relative comparison value with this "without shields condition as the reference. with cable-side shields + with pcb-side shields with cable-side shields + without pcb-side shields without cable-side shields + with pcb-side shields without cable-side shields + without pcb-side shields ? (0 db line) 60 50 40 30 20 10 0 -10 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2 frequency (ghz) shielding effect (db) measured shielding effectiveness for frequencies from 100 mhz to 2 ghz. shielded connectors show noise suppression of 10 db to 20 db, when compared with connectors without the shields. 1 m cable length 1.5 m cable length the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
12 precautions and recommendations retention tab crimp side molded-in lance molded-in lance molded-in lance retention tab facing down retention tab facing up retention tab 1 2 wire termination the following documents will be needed in order to perform the cable terminations. 1 basic cable termination and crimp requirements (general explanations). 2 contact crimp termination machine instruction manual (explanation of the press) 3 applicator parts installation table (applicator installation explanation) 4 crimp conditions table (crimp height/tensile strength standard values) 5 crimp quality fundamentals manual (bell-mouth dimensions, bent up, bent down, rolling, etc.) * correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents . insertion of the crimp contacts in the housing crimp contacts are inserted in the housing as illustrated below. exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the housing s contact cavity and push the contacts in. make sure that the contact is fully inserted and the retention tab clears the molded-in lance. verify that the retention tabs clear the molded-in lances as shown on the illustration below. light pull on the wire, with force not exceeding 3n will also verify the correct contact insertion. removal of the contacts using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts. excersize caution as not to damage the molded-in lance. should the damage occur, the entire housing will need to be replaced. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
13 precautions and recommendations connectors packaging triangle mark mating mating arrow mark triangle mark center mark center mark packaging of the complete cable assemblies exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. special care should be taken n ot to apply any excessive pull forces to the individual wires. when removing the cable assemblies from the packaging do not pull on the wires. make sure that the latch-locks are not interfer ing with packaging. mating of the connectors the connectors have built-in polarizing feature and will not mate when reversed. do not try forced mating. align the connectors as shown on the illustration below and fully insert the plug into the receptacle. confirm that both latch- locks are fully engaged. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
14 precautions and recommendations b b b 2 pull straight apart 1 press 1 press 1 press 1 press b b lock latches handling of connectors after mating do not to apply excessive forces to the connectors when routing the cable after mating. pulling on the entire cable with a force of 20 n or greater can damage the connector. please take due care not to pull the cabl e. un-mating of the connectors depress equally both sides of the latch-locks as shown on the illustration and pull the plug straight out. do not pull on the c ables! the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
15 soldering area 1 soldering area 2 (ground harness examples) b b [ soldering precautions related to fx15s-**p-c connectors ] grounding methods of the ground wire or shields for the cable assemblies 1 solder the ground wire or the shields only in the areas specifically designated for this purpose, as shown on the illustrations below. 2 observe the soldering iron tip temperature and soldering time specified. 3 do not apply excessive force to the connector by pressing it with the tip of a soldering iron. 4 do not splatter the flux from the solder core. precautions and recommendations the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of FX15S-51P-C

	To Download FX15S-51P-C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .