special features electrical specs 1-2 watts aa01d ? 1 year warranty ? 1.25" x 0.34" x 0.57" case size ? 500vdc isolation ? -25c to +71c operating temperature operating ambient temperature: -25c to +71c (full load, no derating) storage temperature: -55c to +105c humidity: 5% to 95% (non-condensing) cooling method: convection mtbf: >1,000,000 hours (mil-hdbk-217f) input input range 4.5 - 5.5 vdc; 10.8 - 13.2 vdc; 21.6 - 26.4 vdc input reverse voltage protection fuse recommended input filter capacitor efficiency 50-70% typ output voltage tolerance output 1 and 2 - 3.0% line regulation output 1 and 2 - 1.0% load regulation 5v output models 1.0% noise/ripple 1% mv p-p (see note1) short circuit protection 10 second duration transient response 250 usec max (50% load change to within 1% vo nom) switching frequency 25khz typ temperature coefficient 0.02%/ c isolation i/o isolation 500vdc isolation resistance 1 x 109 ohms total power: 1-2 watts input voltages: 5v, 12v, or 24v no. of outputs: single, dual environmental astec conventional power americas (usa): 1-888-41-astec europe (uk): 44 (1384) 842-211 asia (hk): 852-2437-9662 60 w9959_02_dcdc_001-073_73 2/8/02 3:55 pm page 60
europe astec house, waterfront business park merry hill, dudley west midlands, dy5 1lx, uk telephone: 44 (1384) 842-211 facsimile: 44 (1384) 843-355 americas 5810 van allen way carlsbad, ca 92008 telephone: 760-930-4600 facsimile: 760-930-0698 ordering information asia units 2111-2116, level 21 tower1, metroplaza 223, hing fong road fwai fong, new territories hong kong telephone: 852-2437-9662 facsimile: 852-2402-4426 input output 1 output 2 maximum model voltage voltage voltage power number 4.5-5.5vdc 5v @ 0.200a 1w aa01d-005l-050s 4.5-5.5vdc 9v @ 0.200a 1.8w aa01d-005l-090s 4.5-5.5vdc 12v @ 0.125a 1.5w aa01d-005l-120s 4.5-5.5vdc 15v @ 0.100a 1.5w aa01d-005l-150s 4.5-5.5vdc +12v @ 0.060a -12v @ 0.060a 1.44w aa01d-005l-120d 4.5-5.5vdc +15v @ 0.050a -15v @ 0.050a 1.5w aa01d-005l-150d 10.8-13.2vdc 5v @ 0.200a 1w aa01d-012l-050s 10.8-13.2vdc 9v @ 0.200a 1.8w aa01d-012l-090s 10.8-13.2vdc 12v @ 0.125a 1.5w aa01d-012l-120s 10.8-13.2vdc 15v @ 0.100a 1.5w aa01d-012l-150s 10.8-13.2vdc +12v @ 0.060a -12v @ 0.060a 1.44w aa01d-012l-120d 10.8-13.2vdc +15v @ 0.050a -15v @ 0.050a 1.5w aa01d-012l-150d 21.6-26.4vdc 5v @ 0.200a 1w aa01d-024l-050s 21.6-26.4vdc 9v @ 0.200a 1.8w aa01d-024l-090s 21.6-26.4vdc 12v @ 0.125a 1.5w aa01d-024l-120s 21.6-26.4vdc 15v @ 0.100a 1.5w aa01d-024l-150s 21.6-26.4vdc +12v @ 0.060a -12v @ 0.060a 1.44w aa01d-024l-120d 21.6-26.4vdc +15v @ 0.050a -15v @ 0.050a 1.5w aa01d-024l-150d case material: plastic weight: 0.3oz/8grams pin assignments aa01d single output 1. +vin 2. n/c 3. n/c 9. n/c 10. -vout 11. +vout 12. -vin dual output 1. +vin 2. -vout 3. com 9. n\c 10. com 11. +vout 12. -vin notes: 1. 20 mhz bandwidth. an external 0.1uf ceramic capacitor is recommended to be placed from +v out to -v out. 2. all specifications are typical at nominal line, full load, and 25 c unless otherwise noted. 3. all specifications subject to change without notice. mechanical drawings are for reference only. 4. warranty: 1 yr astec conventional power 0.57 [14.5] 0.08 [2.0] 0.34 [8.6] 0.4 [10.2] 1 2 3 9 10 11 12 1.25 [31.8] 0.07 [1.9] 0.10 typ. [2.54] 1.10 [27.94] pin #'s are for reference only .020 [0.5] .010 [0.25] 61 www.astec.com w9959_02_dcdc_001-073_73 2/8/02 3:55 pm page 61
|
