30 g3vm-353b/b1/e/e1 mos fet relays six-pin analog-switching mos fet relays with spst-nc contact. general-purpose models added. switches minute analog signals. switching ac and dc. general-purpose models (models with high on resis- tance) added to the series. rohs compliant ! refer to ?common precautions? . application examples electronic automatic exchange systems security systems datacom (modem) systems fa systems measurement devices note: the actual product is marked differently from the image shown here. list of models dimensions note: all units are in millimeters unless otherwise indicated. terminal arrangement/internal connections (top view) pcb dimensions (bottom view) actual mounting pad dimensions (recommended value, top view) contact form terminals load voltage (peak value) model number per stick number per tape spst-nc pcb terminals 350 vac g3vm-353b 50 --- G3VM-353B1 surface-mounting termi- nals g3vm-353e g3vm-353e1 g3vm-353e(tr) --- 1,500 g3vm-353e1(tr) 7.12 0.25 6.4 0.25 2.54 0.25 1.2 0.15 0.5 0.1 0.8 0.25 7.62 0.25 7.85 to 8.80 2.5 min. 3.65 +0.15 ? 0.25 0.25 +0.1 ? 0.05 7.12 0.25 6.4 0.25 2.54 0.25 1.2 0.15 7.62 0.25 10.0 max. 1.0 min. 1.0 min. 3.65 +0.15 ? 0.25 4.0 +0.25 ? 0.2 g3vm-353b/b1 g3vm-353e/e1 note: the actual product is marked different- ly from the image shown here. note: the actual product is marked different- ly from the image shown here. weight: 0.4 g weight: 0.4 g 6 54 13 2 6 54 13 2 g3vm-353b/b1 g3vm-353e/e1 six 0.8-dia. holes (0.56) 2.54 2.54 (0.1) (0.56) (0.1) g3vm-353b/b1 8.3 to 8.8 2.54 2.54 1.5 1.3 g3vm-353e/e1
31 g3vm-353b/b1/e/e1 g3vm-353b/b1/e/e1 absolute maximum ratings (ta = 25 c) values in parentheses are for the G3VM-353B1/e1. electrical characteristics (ta = 25 c) values in parentheses are for the G3VM-353B1/e1. recommended operating conditions use the g3vm under the following conditi ons so that the relay will operate properly. values in parentheses are for the G3VM-353B1/e1. item symbol rating unit measurement conditions input led forward current i f 50 ma repetitive peak led forward current i fp 1 a 100 s pulses, 100 pps led forward current reduction rate ? i f / c ? 0.5 ma/ cta 25 c led reverse voltage v r 5v connection temperature t j 125 c output output dielectric strength v off 350 v continuous load current connection a i o 150 (100) ma connection b 150 (100) connection c 300 (200) on current reduction rate connection a ? i on / c ? 1.5 ( ? 1) ma/ cta 25 c connection b ? 1.5 ( ? 1) connection c ? 3.0 ( ? 2) connection temperature t j 125 c dielectric strength between input and output (see note 1.) v i-o 2,500 vrms ac for 1 min operating temperature t a ? 40 to +85 c with no icing or condensation storage temperature t stg ? 55 to +125 c with no icing or condensation soldering temperature (10 s) --- 260 c 10 s load connection diagram connection a connection b connection c or ac dc 1 2 3 6 5 4 1 2 3 6 5 4 dc dc 1 2 3 6 5 4 load load note: 1. the dielectric strength between the input and output was checked by applying voltage be- tween all pins as a group on the led side and all pins as a group on the light-receiving side. item symbol mini- mum typical maxi- mum unit measurement conditions input led forward voltage v f 1.0 1.15 1.3 v i f = 10 ma reverse current i r --- --- 10 av r = 5 v capacity between terminals c t --- 30 --- pf v = 0, f = 1 mhz trigger led forward current i ft --- 1 3 ma i off = 10 a output maximum resistance with output on connection a r on --- 15 (27) 25 (50) ? i o = 150 ma (100 ma) connection b --- 8 (20) 14 (43) ? i o = 150 ma (100 ma) connection c --- 4 (10) 7 (---) ? i o = 300 ma (200 ma) current leakage when the relay is open i leak --- --- 1.0 ai f = 5 ma, v off = 350 v capacity between i/o terminals c i-o --- 0.8 --- pf f = 1 mhz, vs = 0 v insulation resistance r i-o 1,000 --- --- m ? v i-o = 500 vdc, roh 60% turn-on time ton --- 0.1 (0.25) 1.0 (0.5) ms i f = 5 ma, r l = 200 ?, v dd = 20 v (see note 2.) turn-off time toff --- 1.0 (0.5) 3.0 (1) ms v out i f t on t off 10% 90% i f 1 2 6 4 r l v dd v out note: 2. turn-on and turn-off times item symbol minimum typical maximum unit output dielectric strength v dd --- --- 280 v operating led forward current i f 5 --- 25 ma continuous load current i o --- --- 150 (100) ma operating temperature t a ? 20 --- 65 c engineering data load current vs. ambient temperature g3vm-353b(e) connection c connection a, connection b 400 300 200 100 0 ? 20 0 20 40 60 80 100 ambient temperature ( c ) load current (ma) load current vs. ambient temperature G3VM-353B1/e1 ambient temperature ( c) load current (ma) 400 300 200 100 0 ? 20 0 20 40 60 80 100 connection c connection a or connection b safety precautions refer to ?common precautions? for all g3vm models.
|
