emc technology cage code # 24602 dwg # 1011275000 8851 sw old kansas ave. change notice en 09-e0733 rev lvl c stuart, fl 34997 sheet 1 of 2 title: specification control drawing part identifier: shift (neg) db value -.003 1, 2, 3, 4, 5, 6, 8 -.004 1, 2, 3, 4, 6 -.005 1, 2, 3, 4, 5, 6 -.006 2 ,3, 4 -.007 2, 3, 4, 5, 6 -.009 3, 4, 6 description: chip attenuator network, rohs compliant assembly dwg: n/a 1.0 specifications: 1.1 electrical: 1.1.1 impedance: 50 ohms nominal. 1.1.2 operating frequency range: dc ? 6.0 ghz 1.1.3 attenuation values available: see above description. 1.1.4 attenuation accuracy at 25c: .75 db at 2 ghz. 1.1.5 vswr: 1.30:1 max @ 1 ghz 1.1.6 input power: 200 milliwatts. 1.1.6.1 full rated power to 105c derated to 0 watts at 125c. 1.2 mechanical: 1.2.1 outline dwg: see sheet 2. 1.3 environmental: 1.3.1 operating temperature range: -35c to + 125c. 2.0 unit marking: db value (x), direction of shift (n) and tca shift (x). legibility and permanency per mil-std-130. 3.0 quality assurance: 3.1 sample inspect per ansi/asqc z1.4 general inspection, level ii, aql = 1.0. 3.1.1 visual and mechanical examination for conformance to outline drawing requirements. 3.2 sample inspection (destructive testing). 3.2.1 select three (3) units from lot and measure dca every 20c over the temperature range -55c to +125c. 3.2.1.1 calculate, using linear regression, the slope of the curve. 3.2.1.2 calculate tca using the following formula: tca = slope . attenuation @ 25c 3.2.1.3 acceptance limits: per 1.1.7. 3.3 inspection in accordance with 824w 170 and 824f036 for commercial grade product. 3.4 test data requirements: 3.4.1 no test data required for customer. 3.4.2 data retention - 24 months. 4.0 packaging: standard tape and reel pack per 755w002.
|
