skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com spring 2006 skyworks proprietary information. products and product information are subject to change without notice. 558 HY86-12, HY86-12lf: 90-degree hybrid 0.82?0.90 ghz data sheet parameter frequency min. typ. max. unit frequency 0.82 0.9 ghz insertion loss (1) 0.4 0.5 db isolation 25 30 db vswr all ports 1.15:1 1.2:1 amplitude balance 0.5 0.8 db phase balance 1 2 deg. electrical specifications at 25 c z o = 50 ? , unless otherwise noted 1. less 3 db power split. features low cost low profile small soic-8 package available on tape and reel available lead (pb)-free and rohs-compliant msl-1 @ 260 c per jedec j-std-020 description the HY86-12 is a 90-degree hybrid tuned for the 0.82?0.90 ghz band. the monolithic circuitry is 100% passive and offers low loss, high isolation and exceptional phase/amplitude balance. it is available in the soic-8 surface mount package. 123 4 rf in gnd isol. gnd 876 5 gnd coupled direct gnd pin out direct coupled in isolated block diagram the pin out diagram shows the HY86-12 configured for a divider/coupler with pin 1 as the input port and a 50 ? termination to be placed at pin 3. since the HY86-12 is symmetric, any nonground pin may be used as the input port. the following table shows the possible pin connection combinations for the HY86-12 used as a divider/coupler: input termination direct coupled pin 1 pin 3 pin 6 pin 4 pin 3 pin 1 pin 4 pin 6 pin 4 pin 6 pin 3 pin 1 pin 6 pin 4 pin 1 pin 3 skyworks offers lead (pb)-free, rohs (restriction of hazardous substances)-compliant packaging. new
hybrids skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com skyworks proprietary information. products and product information are subject to change without notice. spring 2006 559 hybrids path losses vs. frequency frequency (ghz) 0.82 0.84 0.86 0.88 0.90 loss (db) -4.0 -3.8 -3.6 -3.4 -3.2 -3.0 direct coupled amplitude balance vs. frequency frequency (ghz) balance (db) -1.00 1.00 0.75 0.50 0.25 0 -0.25 -0.50 -0.75 0.82 0.84 0.86 0.88 0.90 input vswr vs. frequency frequency (ghz) vswr (:1) 1.00 1.05 1.10 1.15 1.20 1.25 1.30 0.82 0.84 0.86 0.88 0.90 0.82 0.84 0.86 0.88 0.90 output vswr vs. frequency frequency (ghz) vswr (:1) 1.00 1.05 1.10 1.15 1.20 1.25 1.30 coupled direct coupled ? direct phase vs. frequency frequency (ghz) phase (deg.) 89.0 89.4 89.8 90.2 90.6 91.0 0.82 0.84 0.86 0.88 0.90 isolation vs. frequency frequency (ghz) isolation (db) -45 -36 -27 -18 -9 0 0.82 0.84 0.86 0.88 0.90 typical performance data z o = 50 ? , unless otherwise noted
hybrids skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com spring 2006 skyworks proprietary information. products and product information are subject to change without notice. 560 characteristic value input power (1) 4 w operating temperature -40 c to +85 c storage temperature -65 c to +150 c electrostatic discharge 125 v absolute maximum ratings 1. exceeding these parameters may cause irreversible damage. performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the absolute maximum specifications. exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. caution: although this device is designed to be as robust as possible, esd (electrostatic discharge) can damage this device. this device must be protected at all times from esd. static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions must be employed at all times. recommended board layout 0.1630 0.0282 0.0180 typ. 0.0424 0.0200 dia. v ia 12 places soic-8 0.049 (1.24 mm) 0.016 (0.41 mm) 0.016 max. (0.41 mm) x 45? chamfer pin 1 0.197 (5.00 mm) 0.189 (4.80 mm) 0.068 (1.73 mm) max. 0.010 (0.25 mm) 0.004 (0.10 mm) 0.010 (0.25 mm) 0.007 (0.17 mm) 0.158 (4.00 mm) 0.150 (3.80 mm) 8? max. 0.020 (0.51 mm) max. 0.244 (6.20 mm) 0.228 (5.80 mm) 0.050 (1.27 mm) bsc pin 8 pin 1 indicator materials 10 mil fr-4. dimensions are in inches. re c ommen d e d s ol d er reflow profiles refer to the ?recommended solder reflow profile? application note . t ape an d reel information refer to the ?discrete devices and ic switch/attenuators tape and reel package orientation? application note.
|
