file: tfs110p.doc version 2.1 31.10.00 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 110p 1/4 ____________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. measurement condition ambient temperature: 23c input power level: 0 dbm terminating impedances for input: 2,9 k ? || -6.2 pf for output: 2,8 k ? || -5.5 pf characteristics remark: reference level for the relative attenuation a rel of the tfs 110 p is the minimum of the pass band attenuation a min . the minimum of the pass band attenuation a min is defined as the insertion loss a e . the reference frequency f c is the arithmetic mean value of the upper and lower frequencies at the 30 db filter attenuation level relative to the insertion loss a e . d a t a typ. value tolerance / limit ____________________________________________________________________________________________________ insertion loss a e = a min 8 db 10 db (reference level) ____________________________________________________________________________________________________ reference frequency f c (30 db-bw) 110,592 mhz 60 khz ____________________________________________________________________________________________________ pass band shape (3 db-bw) gaussian - ____________________________________________________________________________________________________ 3 db bandwidth bw 965 khz - 10 db bandwidth 1695 khz - 20 db bandwidth 2255 khz - 30 db bandwidth 2600 khz - 40 db bandwidth 2840 khz - ____________________________________________________________________________________________________ relative attenuation a rel f c + 475 khz - 3 db f c - 425 khz - 3 db f c 800 khz - 10 db f c + 1200 khz - 20 db f c - 1210 khz - 20 db f c + 1375 khz - 30 db f c - 1395 khz - 30 db f c + 1500 khz ... f c + 5 mhz > 40 db 35 db f c + 5 mhz ... f c +10 mhz > 40 db 30 db f c - 1535 khz ... f c - 10 mhz > 45 db 40 db ____________________________________________________________________________________________________ group delay gd ripple f c 576 khz 250 ns max 400 ns ____________________________________________________________________________________________________ temperature coefficient tc 2nd order * ) - 0,032 ppm/k2 - ____________________________________________________________________________________________________ frequency inversion temperature to t.b.d. ____________________________________________________________________________________________________ operating temperature range - 10 c ... + 60 c storage temperature range - 40 c ... + 85 c ____________________________________________________________________________________________________ input power level - max. + 10 dbm ____________________________________________________________________________________________________ *) - ? f (hz) = tc (ppm/k2) x (t - to)2 x f to (mhz) generated: checked / approved:
file: tfs110p.doc version 2.1 31.10.00 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 110p 2/4 ____________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. construction and pin connection (all dimensions in mm) l9 s 110 p 50 ? ? ? ? test circuit l 2 input 50 ohm c2 input 50 ohm c1 l 1 saw 1,2,3,5,6,7, 4 10 8,9,11,12 1 ground 2 ground 3 output rf return 4 output 5 ground 6 ground 7 ground 8 ground 9 input rf return 10 input 11 ground 12 ground
file: tfs110p.doc version 2.1 31.10.00 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 110p 3/4 ____________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. stability characteristics after the following tests the filter shall meet the whole specification: 1. shock: 500g, 18 ms, half sine wave, 3 sho cks each pl ane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; din iec 68 t2 - 6 3. damp heat: 25 c to 55c / 95% r.h. / 10 cycles (cycle) din iec 68 - 2 ? 30 db 4. resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "air reflow temperature conditions" on page 4; packing tape & reel: iec 286 - 3, with exception of value for n and minimum bending radius; tape type ii , embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 real of empty components at start: min 300 mm real of empty components at start including leader: min 500 mm trailer min 300 mm d o p o e f w p 1 embossed carrier tape cover tape g p 2 b o a o 13,4 0,1 d 1 tape (all dimensions in mm) w : 16 0,3 po : 4 0,1 do : 1,5 + 0,5 e : 1,75 0,1 f : 7,5 0,1 g (min) : 0,75 p2 : 2 0,05 p1 : 8 0,1 d1(min) : 1,5 ao : 5,4 0,1 bo : 7,4 0,1 d1 : 1,5 + 0,5 a c n w 1 w 2 reel (all dimensions in mm): a : 330 w1 : 16,4 +2 w2 (max) : 22,4 n (min) : >= 90 c : 13 0,25 the minimum bending radius is 45 mm. the mounting surface of the filters faces the bottom side of the embossed carrier tape. the marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket hole s on the right side of the tape.
file: tfs110p.doc version 2.1 31.10.00 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 110p 4/4 ____________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. air reflow temperature conditions 1st and 2nd air reflow profile name: pre-heating periods main-heating periods peak temperature temperature: 150 c - 170 c over 200 c 255 c 5 c time: 60 sec. - 90 sec. 20 sec. - 25 sec. chip-mount air reflow profile time / sec. temperature / c 0 20 40 60 80 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 240 table for temperature vs. time during the air reflow process tolerance of temperatures: 5 c time / sec. temperature / c time / sec. temperature / c 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120
|
