View IZPR3Z422_6975887.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - momentary distinctive features and specifications b-36 apem www.apem.com b new! ? rear mounting for easier installation ? ? ? ? ? ? ? front panel sealing : ip67 according to iec 60529 ? shock resistance : 100 g according to iec 512-4, test 6c ? vibration resistance : 10-500hz - 10 g according to iec 512-4, test 6d ? salt spray : iec 512-6, test 11f ? operating temperature : -40c to +85c electrical specifications ? max. current/voltage rating with resistive load : - gold plated silver contacts (code 4) : 200ma 48vdc - 200ma 250vac - silver contacts (code 2) - screw terminals : 2a 250vac - 4a 48vdc ? electrical life at full load : 500.000 cycles ? initial contact resistance : 100 m max. ? insulation resistance : 1 g min. at 500vdc ? dielectric strength : 1.000 vrms 50 hz materials ? case : thermoplastic ul94-v0 ? plunger : polyamide ? bushing/bezel : brass, nickel plated ? contacts : 4 : silver, gold plated 2 : silver (screw terminals) ? multi-wire lead awg20, section 0,6 mm 2 ? led wire : awg26, section 0,12 mm 2 ? lens : polycarbonate ? terminal seal : epoxy led component specifications led colour forward current super red (l0s) 20ma 20ma 20ma 20ma typ. forward voltage max. forward voltage 2,1v 2,1v 2,1v 3,2v yellow (l0y) green (l0g) blue (l0b) 20ma 3,35v 2,3v 2,3v 2,3v 3,8v 4,25v white (l0w) a resistor must be series-connected by the user. resistor value = supply voltage - led forward voltage led forward current on flying lead versions, the led resistor can be integrated by apem on request. general specifications ? panel thickness : - izm : 3 mm (.118) max. - izn : 4 mm (.157) max. ? total travel : 1,8 mm (.070) +/- 0,3 mm ? typical operating force : 6n +/- 2n ? mechanical life : 1.000.000 cycles ? torque : izn : 1 nm max. izm : 0,7 nm max. applied to nut ? soldering : 320c max. for 3 sec. panel cut - out matrix mounting ? flat seal ? o-ring izm (adjustable hex nut) izn (fixed hex nut) (.157max) (.637dia) ?16.20 4.00 maxi 3.00 maxi (.118max) 1 2 (1.063) 27.00 27.00 (1.063) ?16.20 (.637dia) ug1006-a
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - momentary overview apem www.apem.com b-37 iz actuator colour 1 blue b dark blue 2 black 3 green 5 yellow 6 red 7 white 8 bright chrome 9 orange a satin chrome led colour blank non-illum . l0s super red l0y yellow l0g green l0b blue l0w white aboutthisseries on the following pages, you will find successively : model structure of switches and options in the same order as in above chart dimensions : first dimensions are in mm while inches are shown as bracketted numbers. notice : please note that not all combinations of above numbers are available. refer to the following pages for further information. bushing & bezel finish n nickel plated other : on request. series electrical function 3 normally open (no) contacts 4 silver, gold plated 2 silver (screw term.) actuator shape r round, curved p round, flat model m metal, variable panel thickness n metal, fixed panel thickness terminals s solder lugs f flying leads p straight pc z quick-connect (non-illuminated) v screw (non-illuminated & n model only) mounting accessories : standard hardware supplied : - izm : 1 castellated nickel plated brass nut u6915 + 1 silicone flat seal + 1 hex nut 19 mm (.748) across flats u4116. - izn : 1 castellated nickel plated brass nut u6915 + 1 o-ring packaging unit : 25 pieces for flying lead models - 40 pieces for other models b new!
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - momentary for variable panel thickness : izm b-38 apem www.apem.com b new! model structure ? five led colours ? tin plated led terminals ? gold plated contacts illuminated - solder lug terminals curved actuator izmr3s4 normally open flat actuator izmp3s4 normally open non-illuminated - solder lug terminals curved actuator izmr3s4 normally open flat actuator izmp3s4 normally open 1.20 2.80 (.047) (.110) 8.70 2.40 (.342) (.094) 5.20 (.204) 1.00 (.039) 4.55 (.179) plunger marking available on izmp models (symbol 10 mm max.). on request. illuminated - flying lead terminals curved actuator izmr3f4 normally open flat actuator izmp3f4 normally open wire colours : black : no contact, red : led anode (+), blue : led cathode (-) for non-illuminated flying lead versions, refer to illuminated models above. non-illuminated have 2 wires only. non-illuminated illuminated also available with straight pc terminals : izm?3p4 . led colour is indicated by the bottom of the switch. also available with straight pc terminals : izm?3p4 and quick-connect terminals : izm?3z4 . (+) (-) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 (.113dia) ?3.30 (.472) 12.00 (.244) 6.20 6.10 (.240) led cathode (-) 2.00 (.078) no no (.204) 5.20 (.078) 2.00 epoxy (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 (.472) 12.00 ?3.30 (.113dia) 50010 (19.68.393) 15.20maxi. (.598max.) ?10.50 (.413dia) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 (.472) 12.00 (.110) 2.80 (.104) 2.65 epoxy 3.20 (.126)
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - momentary for fixed panel thickness : izn apem www.apem.com b-39 model structure ? five led colours ? tin plated led terminals illuminated - solder lug terminals gold plated contacts curved actuator iznr3s4 normally open flat actuator iznp3s4 normally open illuminated - sealed flying lead terminals gold plated contacts curved actuator iznr3f4 normally open flat actuator iznp3f4 normally open plunger marking available on iznp models (symbol 10 mm max.). on request. for non-illuminated flying lead versions, refer to illuminated models above. non-illuminated have 2 wires only. non-illuminated - solder lug terminals gold plated contacts curved actuator iznr3s4 normally open flat actuator iznp3s4 normally open also available with straight pc terminals : izn?3p4 and quick-connect terminals : izn?3z4 . wire colours : black : no contact, red : led anode (+), blue : led cathode (-) non-illuminated illuminated also available with straight pc terminals : izn?3p4 . led colour is indicated by the bottom of the switch. (+) (-) 1.00x0.40 (.039x.015) (.141) 3.60 (.094) (.047) 2.40 1.20 (.110x.019) 2.80x0.50 7.10 (.279) 3.60 (.141) 2.00x0.40 (.078x.015) (.039) 1.00 1.50 (.059) 8.70 (.342) (.787) 20.00 4.00 (.157) ?3.30 (.113dia) 2.00 (.078) (.472dia) ?12.00 ?16.00x100si (.630diax100is) (.708dia) 3.60 (.141) no no led cathode (-) 2.00 (.078) ?18.00 (.078) 2.00 (.433) 11.00 4.50 (.177) ?18.00 (.708dia) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 (.113dia) ?3.30 (.157) 4.00 20.00 (.787) (.342) 8.70 18.50maxi. (.728max. ) 50010 (19.68.393) 8.70 (.342) (.787) 20.00 4.00 (.157) 2.00 (.078) (.472dia) ?12.00 ?16.00x100si (.630diax100is) (.708dia) 3.60 (.141) ?18.00 (.078) 2.00 (.433) 11.00 staiht p solder lug s quick-connect z b new!
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - momentary for fixed panel thickness : izn - options b-40 apem www.apem.com b new! actuator colour 1 : blue - b : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange a : satin chrome bushing and bezel colour n : nickel plated (standard) other : on request. led colour blank : non-illuminated l0s : super red - l0y : yellow - l0g : green l0b : blue - l0w : white non-illuminated - screw terminals silver contacts curved actuator iznr3v2 normally open flat actuator iznp3v2 normally open 11.00 (.433) ?18.00 (.708dia) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 (.157) 4.00 20.00 (.787) (.342) 8.70 (.275 max) 7.00 maxi
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - latching distinctive features and specifications apem www.apem.com b-41 b new! ? rear mounting for easier installation ? ? ? ? ? ? front panel sealing : ip67 according to iec 60529 ? shock resistance : 100 g according to iec 512-4, test 6c ? vibration resistance : 10-500hz - 10 g according to iec 512-4, test 6d ? salt spray : iec 512-6, test 11f ? robustness (non-illuminated) : ik06 according to en 50102 (1 joule) ? operating temperature : -40c to +85c electrical specifications ? max. current/voltage rating with resistive load : 100ma 24vdc - 200.000 cycles ? initial contact resistance : 100 m max. ? insulation resistance : 1 g min. at 500vdc ? dielectric strength : 1.500 vrms between terminals 1.000 vrms between terminals and frame materials ? case : thermoplastic ul94-v0 ? plunger : polyamide ? bushing/bezel : brass, nickel plated ? contacts : silver, gold plated ? multi-wire lead awg20, section 0,6 mm 2 ? led wire : awg26, section 0,12 mm 2 ? lens : polycarbonate ? terminal seal : epoxy led component specifications led colour forward current super red (l0s) 20ma 20ma 20ma 20ma typ. forward voltage max. forward voltage 1,95v 2v 3,2v 3,2v yellow (l0y) green (l0g) blue (l0b) 1,95v 2,05v 3,70v 4v a resistor must be series-connected by the user. resistor value = supply voltage - led forward voltage led forward current on flying lead versions, the led resistor can be integrated by apem on request. general specifications ? panel thickness : - izm : 3 mm (.118) max. - izn : 4 mm (.157) max. ? total travel : 2,5 mm (.098) +/-0,3 mm ? typical operating force : 5n +/- 2n ? mechanical life : 200.000 cycles ? torque : izn : 1 nm max. izm : 0,7 nm max. applied to nut ? soldering : 320c max. for 3 sec. panel cut - out matrix mounting panel cut - out ? flat seal ? o-ring izm (adjustable hex nut) izn (fixed hex nut) (.157max) (.637dia) ?16.20 4.00 maxi 3.00 maxi (.118max) 1 2 (1.063) 27.00 27.00 (1.063) ?16.20 (.637dia) ug1006-a
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - latching overview b-42 apem www.apem.com b new! iz series electrical function 1 off - on actuator colour 1 blue b dark blue 2 black 3 green 5 yellow 6 red 7 white 8 bright chrome 9 orange a satin chrome contacts 4 silver, gold plated led colour blank non-illum . l0s super red l0y yellow l0g green l0b blue aboutthisseries on the following pages, you will find successively : model structure of switches and options in the same order as in above chart dimensions : first dimensions are in mm while inches are shown as bracketted numbers. notice : please note that not all combinations of above numbers are available. refer to the following pages for further information. bushing & bezel finish n nickel plated (standard) other : on request. actuator shape r round, curved p round, flat model m metal, variable panel thickness n metal, fixed panel thickness mounting accessories : standard hardware supplied : - izn : 1 castellated nickel plated brass nut u6915 + 1 o-ring - izm : 1 castellated nickel plated brass nut u6915 + 1 silicone flat seal + 1 hex nut 19 mm (.748) across flats u4116. packaging unit : 25 pieces for flying lead models - 40 pieces for other models terminals s solder lugs f flying leads p straight pc z quick-connect
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - latching for variable panel thickness : izm apem www.apem.com b-43 b new! model structure ? four led colours ? tin plated led terminals ? gold plated contacts plunger marking available on izmp models (symbol 10 mm max.). on request. illuminated - solder lug terminals curved actuator izmr1s4 off - on flat actuator izmp1s4 off - on (.094) 2.40 (.330) 8.40 (.110) 2.80 1.20 (.047) i- z straight p (.090) 2.30 (.125) 3.20 (.110) 2.80 1.40 (.055) solder lug s also available with straight pc terminals : izm?1p4 & quick-connect terminals : izm?1z4 . illuminated - flying lead terminals curved actuator izmr1f4 off - on flat actuator izmp1f4 off - on wire colours : black : contact, red : led anode(+), blue : led cathode (-) also available with straight pc terminals : izm?1p4 & quick-connect non-illuminated - solder lug terminals curved actuator izmr1s4 off - on flat actuator izmp1s4 off - on also available with straight pc terminals : izm?1p4 & quick-connect terminals : izm?1z4 . for flying lead versions, refer to illuminated models above. non-illuminated have 2 wires only. off on (-) (+) (+) (-) (.133) 3.40 1.10x0.50 (.043x.019) 4.20 (.165) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 ?13.00 (.511dia) (.472) 12.00 (.113dia) ?3.30 5.08 (.200) (.019x.023) 0.50x0.60 (.500) 12.70 (.393) 10.00 3.20 (.125) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.500) (.078) 12.70 2.00 (.630max.) 16.00maxi. ?13.00 (.511dia) 50010 (19.68.393) (.472) 12.00 (.113dia) ?3.30 (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 ?13.00 (.511dia) (.472) 12.00 5.08 (.200) (.500) 12.70 (.393) 10.00 3.20 (.125)
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - latching for fixed panel thickness : izn b-44 apem www.apem.com b new! illuminated - solder lug terminals curved actuator iznr1s4 off - on flat actuator iznp1s4 off - on illuminated - flying lead terminals curved actuator iznr1f4 off - on flat actuator iznp1f4 off - on wire colours : black : contact, red : led anode(+), blue : led cathode (-) also available with straight pc terminals : izn?1p4 & quick-connect terminals : izn?1z4 . non-illuminated - solder lug terminals curved actuator iznr1s4 off - on flat actuator iznp1s4 off - on also available with straight pc terminals : izn?1p4 & quick-connect terminals : izn?1z4 . model structure ? four led colours ? tin plated led terminals ? gold plated contacts plunger marking available on iznp models (symbol 10 mm max.). on request. (.094) 2.40 (.330) 8.40 (.110) 2.80 1.20 (.047) i- z straight p (.090) 2.30 (.125) 3.20 (.110) 2.80 1.40 (.055) solder lug s for flying lead versions, refer to illuminated models above. non-illuminated have 2 wires only. (.133) 3.40 1.10x0.50 (.043x.019) 4.20 (.165) off on (-) (+) (+) (-) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 ?13.00 (.511dia) (.113dia) ?3.30 (.157) 4.00 20.00 (.787) 5.08 (.200) (.019x.023) 0.50x0.60 (.342) 8.70 (.551) 14.00 3.20 (.125) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.342) (.078) 8.70 2.00 (.787max.) 20.00maxi. ?13.00 (.511dia) 50010 (19.68.393) (.113dia) ?3.30 (.157) 4.00 20.00 (.787) (.630diax100is) ?16.00x100si ?12.00 (.472dia) (.078) 2.00 ?13.00 (.511dia) (.157) 4.00 20.00 (.787) 5.08 (.200) (.342) 8.70 (.551) 14.00 3.20 (.125)
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - metal - latching options apem www.apem.com b-45 b new! actuator colour 1 : blue - b : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange a : satin chrome bushing and bezel colour n : nickel plated (standard) other : on request. led colour blank : non-illuminated l0s : super red - l0y : yellow - l0g : green l0b : blue
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - momentary distinctive features and specifications b-46 apem www.apem.com new! new! b ? rear mounting for easier installation ? ? ? ? ? ? front panel sealing : ip67 according to iec 60529 ? shock resistance : 100 g according to iec 512-4, test 6c ? vibration resistance : 10-500hz - 10 g according to iec 512-4, test 6d ? salt spray : iec 512-6, test 11f ? operating temperature : -40c to +85c electrical specifications ? max. current/voltage rating with resistive load : - gold plated silver contacts (code 4) : 200ma 48vdc - 200ma 250vac - silver contacts (code 2) - screw terminals : 2a 250vac - 4a 48vdc ? electrical life at full load : 500.000 cycles ? initial contact resistance : 100 m max. ? insulation resistance : 1 g min. at 500vdc ? dielectric strength : 1.000 vrms 50 hz materials ? case : thermoplastic ul94-v0 ? plunger : polyamide ? bushing/bezel : polyamide ? contacts : 4 : silver, gold plated 2 : silver (screw terminals) ? multi-wire lead awg20, section 0,6 mm 2 ? led wire : awg26, section 0,12 mm 2 ? lens : polycarbonate ? terminal seal : epoxy led component specifications led colour forward current super red (l0s) 20ma 20ma 20ma 20ma typ. forward voltage max. forward voltage 2,1v 2,1v 2,1v 3,2v yellow (l0y) green (l0g) blue (l0b) 20ma 3,35v 2,3v 2,3v 2,3v 3,8v 4,25v white (l0w) a resistor must be series-connected by the user. resistor value = supply voltage - led forward voltage led forward current on flying lead versions, the led resistor can be integrated by apem on request. general specifications ? panel thickness : 3 mm (.118) max. ? total travel : 1,8 mm (.070) +/- 0,3 mm ? typical operating force : 6n +/- 2n ? mechanical life : 1.000.000 cycles ? torque : 0,7 nm max. applied to nut ? soldering : 320c max. for 3 sec. panel cut - out matrix mounting ? flat seal 3.00 maxi (.118max) (.594) 15.10 (.633dia) ?16.10 1 (.866) 22.00 22.00 (.866) ?16.10 (.633dia) 15.10 (.594) ug1006-a
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - momentary overview apem www.apem.com b-47 iz series actuator shape r round, curved p round, flat model p plastic terminals s solder lugs f flying leads p straight pc z quick-connect (non-illuminated) v screw (non-illuminated) electrical function 3 normally open (no) actuator colour 1 blue b dark blue 2 black 3 green 5 yellow 6 red 7 white 8 bright chrome 9 orange a satin chrome contacts 4 silver, gold plated 2 silver (screw term.) led colour blank non-illum . l0s super red l0y yellow l0g green l0b blue l0w white aboutthisseries on the following pages, you will find successively : model structure of switches and options in the same order as in above chart dimensions : first dimensions are in mm while inches are shown as bracketted numbers. mounting accessories : standard hardware supplied : 1 castellated black plastic nut u4249 and 1 silicone flat seal. packaging unit : 25 pieces for flying lead models - 40 pieces for other models notice : please note that not all combinations of above numbers are available. refer to the following pages for further information. bushing & bezel finish 2 black (standard) other : on request. new! new! b
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - momentary illuminated b-48 apem www.apem.com new! new! b model structure ? five led colours ? tin plated led terminals ? gold plated contacts solder lug terminals ? flat curved actuator izpr3s4 normally open flat actuator izpp3s4 normally open plunger marking available on izpp models (symbol 10 mm max.). on request. flying lead terminals - momentary ? flat curved actuator izpr3f4 normally open flat actuator izpp3f4 normally open actuator colour 1 : blue - b : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange a : satin chrome bushing and bezel colour 2 : black (standard) other : on request. led colour l0s : super red - l0y : yellow - l0g : green l0b : blue - l0w : white wire colours : black : no contact, red : led anode(+), blue : led cathode (-) also available with straight pc terminals : izp?3p4 . led colour is indicated by the bottom of the switch. cathode (-) led (.078) 2.00 led cathode (-) no no (.141) 3.60 (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (.177) 4.50 (.342) (.078) 8.70 2.00 (.433) 11.00 (.157) 4.00 (.590/flat) 15.00/plat 2.00 (.078) ?15.00 (.590dia) (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (19.68.393) 50010 (.342) (.078) 8.70 2.00 (.728max. ) 18.50maxi. (.157) 4.00 (.590/flat) 15.00/plat ?15.00 (.590dia) (-) cathode led
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - momentary non-illuminated apem www.apem.com b-49 model structure solder lug terminals - gold plated contacts ? flat curved actuator izpr3s4 normally open flat actuator izpp3s4 normally open sealed flying lead terminals - gold plated contacts ? flat curved actuator izpr3f4 normally open flat actuator izpp3f4 normally open also available with straight pc terminals : izp?3p4 and quick-connect terminals : izp?3z4 . plunger marking available on izpp models (symbol 12 mm max.). on request. screw terminals - silver contacts ? flat curved actuator izpr3v2 normally open flat actuator izpp3v2 normally open actuator colour and bushing/bezel colour : select the desired codes on previous page. 1.00x0.40 (.039x.015) (.141) 3.60 (.094) (.047) 2.40 1.20 (.110x.019) 2.80x0.50 7.10 (.279) 3.60 (.141) 2.00x0.40 (.078x.015) (.039) 1.00 1.50 (.059) straight p solder lug s quick-connect z (.141) 3.60 (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (.342) (.078) 8.70 2.00 (.433) 11.00 (.157) 4.00 (.590/flat) 15.00/plat 2.00 (.078) ?15.00 (.590dia) (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (19.68.393) 50010 (.342) (.078) 8.70 2.00 (.472max.) 12.00maxi (.157) 4.00 (.590/flat) 15.00/plat ?15.00 (.590dia) (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (.275 max) 7.00 maxi (.342) (.078) 8.70 2.00 (.433) 11.00 (.157) 4.00 (.590/flat) 15.00/plat ?15.00 (.590dia) new! new! b
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - latching distinctive features and specifications b-50 apem www.apem.com b new! ? rear mounting for easier installation ? ? ? ? ? max. current/voltage rating with resistive load : 100ma 24vdc - 200.000 cycles ? initial contact resistance : 100 m max. ? insulation resistance : 1 g min. at 500vdc ? dielectric strength : 1.500 vrms between terminals materials ? case : thermoplastic ul94-v0 ? plunger : polyamide ? bushing/bezel : polyamide ? contacts : silver, gold plated ? multi-wire lead awg20, section 0,6 mm 2 ? led wire : awg26, section 0,12 mm 2 ? lens : polycarbonate ? terminal seal : epoxy led component specifications led colour forward current super red (l0s) 20ma 20ma 20ma 20ma typ. forward voltage max. forward voltage 1,95v 2v 3,2v 3,2v yellow (l0y) green (l0g) blue (l0b) 1,95v 2,05v 3,70v 4v a resistor must be series-connected by the user. resistor value = supply voltage - led forward voltage led forward current on flying lead versions, the led resistor can be integrated by apem on request. environmental specifications ? front panel sealing : ip67 according to iec 60529 ? shock resistance : 100 g according to iec 512-4, test 6c ? vibration resistance : 10-500hz - 10 g according to iec 512-4, test 6d ? salt spray : iec 512-6, test 11f ? operating temperature : -40c to +85c general specifications ? panel thickness : 3 mm (.118) max. ? total travel : 2,5 mm (.098) +/- 0,3 mm ? typical operating force : 5n +/- 2n ? mechanical life : 200.000 cycles ? torque : 0,7 nm max. applied to nut ? soldering : 320c max. for 3 sec. panel cut - out matrix mounting panel cut - out ? flat seal 3.00 maxi (.118max) (.594) 15.10 (.633dia) ?16.10 1 (.866) 22.00 22.00 (.866) ?16.10 (.633dia) 15.10 (.594) ug1006-a
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - latching distinctive features and specifications apem www.apem.com b-51 iz series electrical function 1 on - off actuator colour 1 blue b dark blue 2 black 3 green 5 yellow 6 red 7 white 8 bright chrome 9 orange a satin chrome contacts 4 silver, gold plated led colour blank non-illum . l0s super red l0y yellow l0g green l0b blue aboutthisseries on the following pages, you will find successively : model structure of switches and options in the same order as in above chart dimensions : first dimensions are in mm while inches are shown as bracketted numbers. notice : please note that not all combinations of above numbers are available. refer to the following pages for further information. bushing & bezel finish 2 black (standard) other : on request. actuator shape r round, curved p round, flat model p plastic mounting accessories : standard hardware supplied : 1 castellated black plastic nut u4249 and 1 silicone flat seal. packaging unit : 25 pieces for flying lead models - 40 pieces for other models terminals s solder lugs f flying leads p straight pc z quick-connect b new!
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - latching illuminated b-52 apem www.apem.com b new! solder lug terminals ? flat curved actuator izpr1s4 on - off flat actuator izpp1s4 on - off model structure ? four led colours ? tin plated led terminals ? gold plated contacts plunger marking available on izpp models (symbol 10 mm max.). on request. sealed flying lead terminals ? flat curved actuator izpr1f4 on - off flat actuator izpp1f4 on - off (.094) 2.40 (.330) 8.40 (.110) 2.80 1.20 (.047) i-t z straight p actuator colour 1 : blue - b : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange a : satin chrome bushing and bezel colour 2 : black (standard) other : on request. led colour l0s : super red - l0y : yellow - l0g : green l0b : blue wire colours : black : no contact, red : led anode(+), blue : led cathode (-) (.090) 2.30 (.125) 3.20 (.110) 2.80 1.40 (.055) sl l s also available with straight pc terminals : izp?1p4 and quick-connect terminals : izp?1z4 . (.133) 3.40 1.10x0.50 (.043x.019) 4.20 (.165) (+) (-) (-) (+) off on (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (.342) (.078) 8.70 2.00 (.551) 14.00 (.157) 4.00 (.590/flat) 15.00/plat ?15.00 (.590dia) 3.20 (.125) (.019x.023) 0.50x0.60 5.08 (.200) (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (.342) (.078) 8.70 2.00 (.787max.) 20.00maxi. (.157) 4.00 (.590/flat) 15.00/plat ?15.00 (.590dia) 50010 (19.68.393)
iz series rear mounted sealed pushbutton switches - bushing ? 16 mm - latching non-illuminated apem www.apem.com b-53 model structure ? gold plated contacts solder lug terminals ? flat curved actuator izpr1s4 on - off flat actuator izpp1s4 on - off also available with straight pc terminals : izp?1p4 and quick-connect terminals : izp?1z4 . plunger marking available on izpp models (symbol 10 mm max.). on request. actuator colour 1 : blue - b : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange a : satin chrome bushing and bezel colour 2 : black (standard) other : on request. sealed flying lead terminals ? flat curved actuator izpr1f4 on - off flat actuator izpp1f4 on - off (.094) 2.40 (.330) 8.40 (.110) 2.80 1.20 (.047) i-t z straight p (.090) 2.30 (.125) 3.20 (.110) 2.80 1.40 (.055) solder lug s off on (.133) 3.40 1.10x0.50 (.043x.019) 4.20 (.165) (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (.342) (.078) 8.70 2.00 (.551) 14.00 (.157) 4.00 (.590/flat) 15.00/plat ?15.00 (.590dia) 3.20 (.125) 5.08 (.200) (.630diax100is) ?16.00x100si ?12.00 (.472dia) ?20.00 (.787dia) (.342) (.078) 8.70 2.00 (.787max.) 20.00 maxi (.157) 4.00 (.590/flat) 15.00/plat ?15.00 (.590dia) 50010 (19.68.393) b new!

▲Up To Search▲

Price & Availability of IZPR3Z422

	To Download IZPR3Z422 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .