single-in-line sockets solderless press-fit single row www.mill-max.com 516-922-6000 48 series 304, 306 specify plating code xx= 13 93 99 sleeve (pin) contact (clip) 10 ? au 200 ? sn/pb 200 ? sn/pb 30 ? au 30 ? au 200 ? sn/pb xx= plating code see below ordering information series 304...770 solderless press-fit 304-13-1_ _-41-770 304-13-1_ _-41-780 series 346...012 compliant solderless press-fit 346-xx-1_ _-41-012 series 346...013 compliant solderless press-fit 346-xx-1_ _-41-013 fig. 1 fig. 2 fig. 3 fig. 4 specify # of pins 01-64 specify # of pins 01-64 specify # of pins 01-64 specify # of pins 01-64 series 304...780 solderless press-fit series 304...770 and 304...780 are available in plating code 13 only. (for .090-.130? thick boards) (for .060-.100? thick boards) (for .062? thick boards) (for .125? thick boards) ? unique compliant tail pins conform to the plated thru-hole without stressing the inner layers of a multilayer board. ? recommended plated thru-hole for 304 series: .036?-.041? use a 1.1mm drill prior to plating. using m-m# 0477 & 0478 pins. ? for 346 series: .040? .003? finished plated thru-hole. using m-m# 4612 & 4613 pins. patent no. 4,799,904. ? hi-rel, 4-finger becu #30 clip rated at 3 amps. see page 208 for details. fig. 1 fig. 2 fig. 3 fig. 4
|
