1n4151w www.vishay.com vishay semiconductors rev. 1.4, 08-may-13 1 document number: 85721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal fast switching diode mechanical data case: sod-123 weight: approx. 10.3 mg packaging codes/options: 18/10k per 13" reel (8 mm tape), 10k/box 08/3k per 7" reel (8 mm tape), 15k/box features ? silicon epitaxial planar diode ? fast switching diode ? aec-q101 qualified ? base p/n-e3 - rohs-compliant, commercial grade ? base p/n-he3 - rohs-compliant, aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ? ? ? ? ? note (1) valid provided that electrodes are kept at ambient temperature. parts table part ordering code internal construction type marking remarks 1n4151w 1n4151w-e3-08 or 1n4151w-e3-18 single diode a5 tape and reel 1n4151w-he3-08 or 1n4151w-he3-18 absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 50 v repetitive peak reverse voltage v rrm 75 v average rectified current half wave rectification with resistive load (1) f ? 50 hz i f(av) 150 ma surge current t < 1 s and t j = 25 c i fsm 500 ma power dissi pation (1) p tot 410 mw thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit thermal resistance junction to ambient air (1) r thja 450 k/w junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c operating temperature range t op - 55 to + 150 c
1n4151w www.vishay.com vishay semiconductors rev. 1.4, 08-may-13 2 document number: 85721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. forward voltage fig. 2 - dynamic forward resistance vs. forward current fig. 3 - admissible power dissipatio n vs. ambient temperature fig. 4 - relative capacitance vs. reverse voltage electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 50 ma v f 1.0 v leakage current v r = 50 v i r 50 na v r = 20 v, t j = 150 c i r 50 a reverse breakdown voltage i r = 5 a (pulsed) v (br) 75 v diode capacitance v f = v r = 0 v c d 2pf reverse recovery time i f = 10 ma, i r = 10 ma i r = 1 ma t rr 4ns i f = 10 ma, i r = 1 ma v r = 6 v, r l = 100 ? t rr 2ns 18742 1000 100 10 1 0.1 0.01 i- for w ard c u rrent (ma) f 0 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0.2 v - for w ard v oltage ( v ) =100 c t j 25 c f 18662 1 10 100 1000 10000 r - dynamic for w ard resistance f () 110 0.1 0.01 100 i f - for w ard c u rrent (ma) =25 c t j f=1khz 200 18743 t am b - am b ient temperat u re (c) 1000 800 600 400 200 20 40 60 80 100 120 140 160180 p - admissi b le po w er dissipation (mw) tot 0 0 18664 2468 0 1.1 1.0 0.9 0.8 0.7 10 c d ( v r )/c d (0 v ) - relati v e capacitance (pf) v r - re v erse v oltage ( v ) =25 c t j f=1mhz
1n4151w www.vishay.com vishay semiconductors rev. 1.4, 08-may-13 3 document number: 85721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - leakage current vs. junction temperature fig. 6 - admissible repetitive peak forw ard current vs. pulse duration 1 18744 10 100 1000 10000 0 20 40 60 80 100 120 140 160 180 200 i - leakage c u rrent (na) r t j - j u nction temperat u re (c) =50 v v r /t t = 1/f =t pp i frm t p t t i =0 0. 1 0. 2 0. 5 10 10 1 -1 100 10 1 -5 10 10 -4 10 -3 10 -2 18709 i - admissi b le repetiti v e frm peak for w ard c u rrent (a) t p -p u lse length (s)
1n4151w www.vishay.com vishay semiconductors rev. 1.4, 08-may-13 4 document number: 85721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): sod-123 0.1 (0.004) max. 2.85 (0.112) 2.55 (0.100) 3.85 (0.152) 3.55 (0.140) 1.7 (0.067) 1.40 (0.055) mo u nting pad layo u t 2.5 (0.098) 0.85 (0.033) 0.85 (0.033) 0.85 (0.033) cathode b ar 0.65 (0.026) 0.45 (0.018) 0.10 (0.004) 1 (0.039) 0.15 (0.006) 1.35 (0.053) 0.2 (0.008) 0 to 8 0.45 (0.018) 0.25 (0.010) 0.5 (0.020) ref. re v . 4 - date: 24. sep. 2009 doc u ment no.: s8- v -3910.01-001 (4) 17432
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|