3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header .100 , .235 / .318 mating length, straight & righ t angle, solder tails 929 series physical electrical environmental insulation material: glass filled polyester (pbt) or high temperature (pct) flammability: ul 94v-0 color: black contact material: copper alloy plating underplating: 50 " [1.27 m] nickel wiping area and solder tails: see ordering information marking: none current rating: 2.5 a insulation resistance: > 5 10 9 at 500 v dc withstanding voltage: 1500 v rms at sea level temperature rating: -40 c to +105 c process rating: 260 c (per j-std-020c) for pct parts only (pbt insulator version), maximum insulator temperature 191 c (solder wave process only) moisture sensitivity level: 1 (per j-std-020c) for pct parts only ts-0769-06 sheet 1 of 5 ? stackable ? tin lead or gold plating available ? solder stand-offs fac ilitate production wave soldering ? board pin retention feature available ? see regulatory inform ation appendix (ria) for chemical compliance information date modified: march 6, 2007 ul file no.: e68080
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 ts-0769.tif 3m ? pin strip header .100 , .235 / .318 mating length, straight & righ t angle, solder tails 929 series table 2 pin quantity dimension c (see note 1) 01 0.10 [2.5] 02 0.20 [ 5.1] 03 0.30 [ 7.6] 04 0.40 [10.2] 05 0.50 [12.7] 06 0.60 [15.2] 07 0.70 [17.8] 08 0.80 [20.3] 09 0.90 [22.9] 10 1.00 [25.4] 11 1.10 [27.9] 12 1.20 [30.5] 13 1.30 [33.0] 14 1.40 [35.6] 15 1.50 [38.1] 16 1.60 [40.6] 17 1.70 [43.2] 18 1.80 [45.7] 19 1.90 [48.3] 20 2.00 [50.8] 21 2.10 [53.3] 22 2.20 [55.9] 23 2.30 [58.4] 24 2.40 [61.0] 25 2.50 [63.5] 26 2.60 [66.0] 27 2.70 [68.6] 28 2.80 [71.1] 29 2.90 [73.7] 30 3.00 [76.2] 31 3.10 [78.7] 32 3.20 [81.3] 33 3.30 [83.8] 34 3.40 [86.4] 35 3.50 [88.9] 36 3.60 [91.4] ts-0769-06 sheet 2 of 5 one row .0 .00 .000 inch .1 .01 .005 [ ] d im ensions for r eference onl y tolerance unless noted [mm] inch recommended hole pattern notes: 1.dimension c is a maximum when the pin strip is cut to length, not when the strip is broken to length. 2.board pin retention feature available: change from ??926'' to ??9r9'' when ordering. right angle solder/wrap tails .100 + .003 [2.54] ?.040 + .003 [1.02] after plating .170 min [4.32] straight solder/wrap tails .100 + .003 [2.54] ?.040 + .003 [1.02] after plating
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header .100 , .235 / .318 mating length, straight & right angle, solder tails 929 series ordering information 929xxx-xx-xx-xx gold tail length code (see table 1) 929xxx-xx-xx-xx pin quantity (see table 2) tin mating length dim b (see table 1) mating length dim a (see table1) gold plating suffix location & thickness (see table 1) i = 10 [0.25m] all over, pbt insulator (ria e1 & c1 apply) eu = 10 [0.25um] all over, pct insulator (ria e1 & c1 apply) plating suffix: blank = 100" [2.54m] tin-lead, pbt insulator (ria e3 & c2 apply) rk = 200 " [5 um] matte tin, pct insulator (ria e1 & c1 apply) ts-0769-06 sheet 3 of 5 pin quantity (see table 2) tail length code (see table 1) one row ab 01 0.110 [2.79] 09 0.145 [3.68] 02 0.210 [5.33] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 07 0.910 [23.11] 01 0.110 [2.79] 11 0.125 [3.18] 09 0.145 [3.68] 06 0.710 [18.03] 01 0.110 [2.79] 02 0.210 [5.33] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 07 0.910 [23.11] 929835 right angle 01 0.235 [5.97] 0.110 [2.79] 01 0.110 [2.79] 11 0.125 [3.18] 06 0.710 [18.03] 01 0.318 [8.08] 0.110 [2.79] 929730 right angle table 1 dimensions tail length code 3m part number plating 0.318 [8.08] 0.235 [5.97] 0.318 [8.08] 0.235 [5.97] 0.110 [2.79] gold 01 tin 929705 straight 929834 straight 929700 straight 0.235 [5.97] 929647 straight 929648 right angle
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header .100 , .235 / .318 mating length, straight & righ t angle, solder tails 929 series table 1 pin quantity total pin quantity dimension c (see note 1) 01 02 0.10 [ 2.5 ] 02 04 0.20 [ 5.1] 03 06 0.30 [ 7.6] 04 08 0.40 [10.2] 05 10 0.50 [12.7] 06 12 0.60 [15.2] 07 14 0.70 [17.8] 08 16 0.80 [20.3] 09 18 0.90 [22.9] 10 20 1.00 [25.4] 11 22 1.10 [27.9] 12 24 1.20 [30.5] 13 26 1.30 [33.0] 14 28 1.40 [35.6] 15 30 1.50 [38.1] 16 32 1.60 [40.6] 17 34 1.70 [43.2] 18 36 1.80 [45.7] 19 38 1.90 [48.3] 20 40 2.00 [50.8] 21 42 2.10 [53.3] 22 44 2.20 [55.9] 23 46 2.30 [58.4] 24 48 2.40 [61.0] 25 50 2.50 [63.5] 26 52 2.60 [66.0] 27 54 2.70 [68.6] 28 56 2.80 [71.1] 29 58 2.90 [73.7] 30 60 3.00 [76.2] 31 62 3.10 [78.7] 32 64 3.20 [81.3] 33 66 3.30 [83.8] 34 68 3.40 [86.4] 35 70 3.50 [88.9] 36 72 3.60 [91.4] two row .0 .00 .000 inch .1 .01 .005 [ ] dimensions for reference onl y tolerance unless noted [m m ] inch ts-0769-06 sheet 4 of 5 notes: 1.dimension c is a maximum when the pin strip is cut to length, not when the strip is broken to length. breaking of dual row parts is not recommended. 2.board pin retention feature available: change from ??926'' to ??9r9'' when ordering.
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pin strip header .100 , .235 / .318 mating length, straight & right angle, solder tails 929 series ts-0769-06 sheet 5 of 5 ordering information 929xxx-xx-xx-xx gold tail length code (see table 2) 929xxx-xx-xx-xx pin quantity (see table 1) tin 3m part number (see table 2) 3m part number (see table 2) gold plating suffix location & thickness (see table 2) i = 10 [0.25m] all over, pbt insulator (ria e1 & c1 apply) eu = 10 [0.25 m] all over, pct insulator (ria e1 & c1 apply) plating suffix: blank = 100" [2.54 m] tin-lead, pbt insulator (ria e1 & c1 apply) pin quantity (see table 1) tail length code (see table 2) two row ab 01 0.110 [2.79] 09 0.145 [3.68] 02 0.210 [5.33] 08 0.310 [7.87] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 01 0.110 [2.79] 11 0.125 [3.18] 10 0.175 [4.45] 03 0.410 [10.41] 06 0.710 [18.03] 01 0.110 [2.79] 02 0.405 [10.29] 01 0.110 [2.79] 02 0.405 [10.29] 01 0.110 [2.79] 09 0.145 [3.68] 02 0.210 [5.33] 08 0.310 [7.87] 03 0.410 [10.41] 04 0.510 [12.95] 05 0.610 [15.49] 01 0.110 [2.79] 11 0.125 [3.18] 09 0.145 [3.68] 10 0.175 [4.45] 03 0.410 [10.41] 06 0.710 [18.03] 01 0.110 [2.79] 04 0.145 [3.68] 02 0.405 [10.29] table 2 dimensions tail length code 3m part number plating tin 929838 right angle 0.318 [8.08] gold 929665 straight 929715 straight 929667 right angle 929745 right 929836 straight 929710 straight 0.235 [5.97] 0.235 [5.97] 04 0.145 [3.68] 0.235 [5.97] 0.318 [8.08] 0.235 [5.97] 0.318 [8.08]
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217-a
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs 2 0 electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. name and content of hazardous substances or elements 3 electronic solutions division 6801 river place blvd. austin, tx 78726-9000 800/225-5373 www.3m.com/interconnects ria-2217-a ? 3m 2007
|
