hl series rcds hl is an economical inductor specifically designed for high current applications. the use of high saturation cores makes them ideal for switching power supply circuits. the characteristics of the core geometry enable a wide range of inductance values and high q-levels (typically 10 to 70, depending on inductance value). units are protected by flame retardant shrink tubing. typical applications include rfi suppression, filters, scr & triac controls, switching regulators, power suppliers, and power amplifiers. r high saturation core enables high inductance with low dc resistance r industrys widest selection! current ratings up to 20 amp, inductance range 1h to 100mh r available on exclusive swift tm program! r all sizes avilable on tape & reel features rcd components inc., 520 e. industrial park dr., manchester, nh usa 03109 tel: (603) 669-0054 fax:(603) 669-5455 e-mail: rcdcompinc@aol.com www.rcd-comp.com specifications tolerance: 10% standard ( 5% and 20% available) temperature range: -40 to +105 c temperature rise: 20 c typ. at full rated current fa019 specifications subject to change without notice options r option er military screening: per mil-c-15305 (thermal shock -25/+85 , dcr, inductance, vis/mech insp) r option a: units are alpha-numerically marked r non-standard values, increased current, increased temp., inductance measured at high frequency, epoxy encapsu- lated version, cut & formed leads, etc. high current inductors applications: typical applications include noise filtering, dc/dc converters, switching regulators, audio equipment, telecom, rf circuits, audio filters, hash filters, power supplies, power amplifiers, etc. customized models available for specific applications (consult factory). inductance value ( f h) test frequency (m h z ) q (m in .) dcr s (m a x.) rated c u rre n t (a ) 0.82 1.0 1.2 1.5 1.8 2.2 2.5 2.7 3.3 3.9 4.7 5.0 5.6 6.8 7.5 8.2 10 12 15 18 22 27 33 39 47 56 68 75 82 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 37 40 39 33 37 38 40 43 35 37 37 40 35 29 30 32 40 40 40 40 40 50 45 45 45 40 40 40 50 .010 .0 11 .012 .014 .020 .025 .030 .028 .036 .048 .053 .080 .092 .11 3 .11 4 .11 6 .160 .140 .158 .180 .230 .285 .346 .371 .502 .687 .888 1.19 1.20 7.4 7.0 6.0 5.0 4.8 4.4 4.1 4.0 3.7 3.4 3.2 2.9 2.8 2.6 2.5 2.2 2.1 2.0 1.6 1.5 1.4 1.3 1.2 1.1 1.0 .9 5 .9 0 .8 6 .8 5 inductance value ( f h) te st frequency (m h z) q (m in .) dcr s (m a x.) rated c u rre nt (a ) 100 120 150 180 220 250 270 330 390 470 500 560 680 750 820 1000 1200 1500 1800 2200 2500 2700 3300 3900 4700 5000 6000 7500 10000 2.5 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .7 9 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 .2 5 60 70 60 70 50 40 50 50 45 40 35 40 45 30 40 40 70 62 62 60 60 60 50 50 50 45 35 25 25 1.60 1.72 1.95 2.07 2.18 2.70 2.53 3.33 3.45 5.20 5.30 5.40 5.90 6.00 6.32 8.60 10.0 14.3 15.8 17.7 18.0 19.3 21.7 26.0 29.9 31.0 41.0 50.0 70.0 .7 5 .6 5 .6 0 .5 8 .4 9 .4 9 .4 5 .4 1 .3 9 .3 5 .3 4 .3 2 .2 9 .2 8 .2 7 .2 2 .2 1 .1 9 .1 7 .1 5 .1 4 .1 4 .1 3 .1 2 .11 .1 0 .0 9 .0 8 .0 7 resist ors w coils w delay lines a d b 1.1 min 1 tolerance code : j = 5%, k=10%, w = 15% packaging: b is bulk, t = tape & reel inductance (uh): 2 signif. digits & multiplier, e.g. 1r0=1uh, 100=10uh, 102=1000uh option codes: er, a (leave blank if standard) rcd type p/n designation: hl1 - 100 - k b
|
